DIY shoes for dogs - patterns

Probably each of us saw dogs walking on the street in shoes. For some, this causes laughter and bewilderment, for some - a smile. Nevertheless, at present, shoes for four-legged pets are not only a tribute to fashion and a way to stand out, but also a necessity. This is due to the fact that the chemicals that sprinkle the roads simply injure the delicate skin of the paws. Today in pet stores sell a huge amount of shoes, which is designed for absolutely every taste and financial capabilities. But if you want to please your four-legged friend with an exclusive pair of new shoes, we suggest you make it yourself. This will not be difficult, and our experts will tell you how to make shoes for dogs with your own hands - the patterns will be given the simplest.

to contents ↑

Why do dogs need shoes?

Dog shoes are a necessary accessory, as it is designed to protect the animal's paws not only from chemicals, but also from exposure to cold, which is especially true for small breeds. For large breeds of dogs, this protection also saves from the formation of lumps of snow and ice between the fingers, which further interfere with the movement of the animal and can damage the pads.

Important! The most sensitive breeds that suffer from ice sticking on their paws are small dogs - poodles, spaniels, terriers and schnauzers, and you can also sew clothes on York.

In addition, such protection is simply necessary if the pet has all kinds of veterinary problems, for example, wounds, injuries, pathologies of the structure of the paws or diseased joints. In this case, the shoes provide complete protection against ingress of dirt and all kinds of pathogenic bacteria.

Important! Sometimes, according to certain indications, veterinarians prescribe special shoes of individual tailoring, taking into account the peculiarities of the structure of the animal.

to contents ↑

What materials are best for making shoes for dogs?

How to make shoes and slippers for small animals? Basically, in the manufacture of shoes for dogs using genuine leather, suede, various leather substitutes or a special dense waterproof fabric.

Important! When choosing a leather cloth for sewing such a product, pay attention to ensure that this material is of high quality and does not cause allergies in your pet.

Also, when choosing a material, one should take into account the fact that boots made of leather are unsuitable for long and active walks. Cloth shoes are even less durable and will not allow you to walk your four-legged friend in the melting snow and spring slush. The best option is rubber boots that can withstand the weather and excessive activity of the pet.

Important! The most practical and durable rubber sole is considered. Unfortunately, its main and only drawback is the rather large weight, which creates discomfort to the animal when worn.

You should also worry about fasteners. Basically, for fixing shoes or boots on paws, 2-3 rows of Velcro, various buckles and elastic laces are used.

Important! Pay attention to the fact that the larger the breed of the dog, the thicker the sole should be and the stronger the fixation.

to contents ↑

How to sew shoes for a dog with your own hands - step by step lessons and instructions

In order to make shoes for your four-legged friend, we offer you step-by-step master classes. Putting them into practice, you can sew shoes or boots for the dog in a short time and with minimal financial costs.

Option number 1

These are quite simple shoes that can be made without constructing a pattern. To make them you will need:

• Flap of warm material;

Important! You can use an old Angora sweater as a basis. Most importantly, the fabric should not be thick and rough.

• A piece of genuine leather or its substitute;
• Needle and thread in color;
• Thread for decorative decoration;
• Rubber bands and clips.

Once everything is cooked, you can proceed to the direct manufacture. The sequence of actions is as follows:

• To sew the shoes for the dog with your own hands, first you need to take measurements. Put your four-legged friend on the cloth and draw a pencil around the legs, not forgetting to add 1-2 centimeters for the allowances.
• Cut the workpiece.
• Attach the finished elements to the leather flap, circle them and cut them out. This way you prepare the base for the sole.

Important! Pay attention to the fact that the sole should be slightly smaller in relation to the main workpiece.

• Sew the main stock and leather using a sewing machine.
• Next, make a boot. To do this, measure the circumference of the sole. This will be the width of the shaft. You choose the length yourself, based on the size of the animal.

Important! Pay attention: the larger the dog, the higher boots should be made so that they hold firmly on the paws.

• Sew the front side of the boot to the sole.
• Pull the elastic over the boot and put on the clips.

That's all, the shoes are ready! If desired, you can tie them with colored thread or edging.

Option number 2

These shoes without a sole will be an excellent protection for the legs of your four-legged friend while walking in warm weather. To stitch them, you must adhere to the following sequence of actions:

• To get started, make all the necessary measurements:
  1. Paw diameter at the widest point;
  2. Paw height from surface to carpal joint;
  3. The height of the future product.
• When sewing such shoes for a dog with your own hands, you need to build a pattern. You need to do this in the following order:
  1. Draw a circle with a radius equal to the height of the boots.
  2. In the center of the big circle, draw another one whose diameter will be equal to the diameter of the dog's paws.
  3. Between the circles, mark the location of the wrist joint. Pattern is ready.
• Cut out ready-made pattern elements from paper.
• Transfer the pattern to the fabric, remembering to mark all the necessary details with marks.
• Set aside and cut 4 wings, adding about 1 centimeter for the hem.

Important! The width of the drawstring is equal to the width of the gum with the addition of 1 centimeter, and the length is the radius of the wrist joint.

• Cut out the finished elements from the fabric.

Important! Do not rush to sew all shoes at once. To start, make one and try it on your pet. If everything worked out well for you, you can start making the next three.

• Work on the edges of the cut workpiece.
• Sew on the drawstring and insert the elastic.

That's all, the shoe is ready for your friend.

Option number 3

These are pretty simple but comfortable boots that your four-legged friend can wear in any weather. The manufacturing process must be carried out in the following order:

• Make all necessary measurements:
  1. The length of the future product;
  2. Paw height;
  3. Paw diameter;
  4. Shin thickness in the widest place;
  5. The thickness of the hock.
• Build a pattern. The algorithm of actions is as follows:
  1. Draw a rectangle whose height is equal to the height of the future product, and the width is the width of the widest place of the tibia + 1 centimeter.
  2. In the figure, mark the location of the hock and carpal joints.
• Transfer the finished pattern to the fabric, adding 1-2 centimeters on the sides for allowances.

Important! If you plan to use an elastic band instead of a retainer, then at this stage you need to draw and cut a drawstring of the desired size.

• Sew retainers at the level of the hock and carpal joints.
• Fold the rectangular pattern element in half, sew it. This way you get the bootleg.
• Sew on the sole.

Important! In order for these shoes to wear longer, you can strengthen them with dermatin or dense tissue.

to contents ↑

Useful Tips

Sewing new shoes for your pet is pretty straightforward. The most important thing is to take into account the nuances during work that will help you make the shoes for the dog correctly, taking into account its structure and needs:

• Since the dog has 4 paws, shoes should be made in the same amount. But you need to take measurements and sew them in pairs: on the front and hind legs. This is due to the fact that the hind and front legs are radically different in their structure and size.
• Try to choose a rough material for the sole that will not slip on the surface of the floor.

Important! You can attach Velcro to the sole surface. Thanks to this life hack, your pet's paws will not slip. The only drawback is that Velcro collects dust, small debris.

• Shoes are best sewn with a small margin so that it is not cramped.
• Measure your dog while standing. So the pet rests completely on its paw, and your pattern will turn out as accurate as possible.
• It is better to choose fasteners which are tightening, and it is advisable not to use a zipper, buttons.
• In order for the shoes to withstand damp, bad weather, the seams should be treated with PVA glue.

Important! Pay attention to the fact that the shoes do not squeeze the legs of your four-legged friend. This leads to poor circulation and subsequently freezing of the extremities.

• Sutures should be done externally. This is necessary so that the shoes are comfortable for the dog and do not rub him.

to contents ↑

Stock footage

In order to sew shoes for a dog with your own hands, you do not need professional skills of cutting, sewing. For this, it is enough to stock up only with patience and desire. By putting our advice into practice, you can protect your pet's paws from the harmful effects of the environment and the cold, because you should never forget that we are responsible for those we tamed.