How to clean mold in the bathroom





The appearance of mold in the house does not please anyone, especially if it happened in the bathroom. But to prevent such a problem is not always possible, because the natural conditions of high humidity are the most suitable place for its reproduction. That is why the question of how to remove mold in the bathroom always remains relevant. In this article, we will give you some effective tips on how to clean mold in the bathroom and how to prevent new foci of unwanted fungus.

to contents ↑

Why is mold removed?

The problem of mold is not only that it causes discomfort with its not aesthetic appearance. There is a risk of poisoning it with toxic spores, secreted by the fungus in the products of its vital activity, up to poor health and allergies. In the event of such a nuisance as mushroom mold, you must immediately carry out a quality treatment of the room to avoid unwanted health problems. And for this you need to know how to remove the fungus in the bathroom and how to remove mold in the bathroom.

to contents ↑

Where does mold come from in the bathroom?

Before you remove the mold in the bathroom, find out the reasons for its appearance.

Most often, black mold appears in warm, humid, poorly ventilated areas. Even if you made repairs in accordance with all the rules and do not see any traces of fungus, mold spores are still present in all corners of the room and wait only for a favorable atmosphere for reproduction. Mold is well fixed on various surfaces, where poor waterproofing, forms an unpleasant musty smell, penetrating the roots of all wet surfaces.

Important! If you do not deal with the problem due to ignorance of how to properly clean the mold in the bathroom, over time the fungus damages the finishing materials, peels off the paint, destroys the plaster up to cracks in concrete.

to contents ↑

How to get rid of fungus in the bathroom?

Approach this process in several stages, only a strict sequence of each step promises you a good result.

Check and improve ventilation

If the ventilation in the bathroom is wrong, be prepared for the fact that, no matter how you destroy the destroyer of your bathroom, it will appear again over time. Therefore, before proceeding with the cardinal methods and solving the problem, than removing the fungus from the bathroom, do the following:

1. Check the ventilation shaft - it can become clogged with cobwebs, foreign objects, etc., which interferes with the normal outflow of air.
2. Try to keep the doors open so that steam does not accumulate in the bathroom.

Disposal of contaminated furniture

In case of mold damage to the furniture in the bathroom, we recommend that you completely remove it, since the settled fungus in the pores will sooner or later reactivate.

Dampness reduction

Here, the main focus of your actions will be on improving pipe insulation. Condensation forms on all surfaces, resulting in mold.

Plumbing Repair

1. Repair a subject of constant leakage - thus you will remove steady moisture.
2. If there is a washing machine in the bathroom, make sure that after washing it does not accumulate water residues.

Important! Breeding mold is the most time-consuming process, so do not ignore additional recommendations:

• Dry the entire bathroom well with an electric heater.
• Treat the affected areas with special or folk remedies, depending on the degree of surface damage with the fungus.

to contents ↑

How to protect yourself?

Before removing the fungus in the bathroom, protect yourself from toxins.

1. Wear personal protective equipment such as a respirator, goggles and gloves.
2. To avoid the formation of dust when removing mold, moisten the work surface.
3. Before using any drug, read the instructions for use and dosage.

to contents ↑

How to remove black mold in the bathroom?

Isolate the bathroom so that during disinfection and sterilization of the fungus, spores do not spread to other rooms. Then proceed as follows if the pollution is negligible:

1. Moisten areas with mold with a cleaning solution: in 4 parts of water, 2 parts of detergent and ammonia.
2. Wait a while for the remedy to work.
3. Wash thoroughly with a brush.

If mold damage is quite serious:

1. Dismantle the wall finish with a sharp trowel to the concrete.
2. Sand the problem area with sandpaper.
3. Dry it thoroughly with a fan heater or blow dryer.
4. Apply a special substance or solution to remove molds that completely block pathogens.
5. Treat the surface in several sets of 2-3 r. With a break of 5 to 10 hours.
6. In the final fight against mold, disinfect the room with special means to remove the remaining disputes after cleaning, they can be purchased at any household store.

Important! Dispose of all items that were used in the process.

to contents ↑

How to wash mold in the bathroom?

To quickly cope with the task of how to get rid of the fungus and remove mold from the bathroom, use the tools available below:

• baking soda;
• table vinegar (essence);
• hydrogen peroxide;
• ammonia;
• copper sulfate;
• boric acid;
• bleach containing chlorine;
• borax;
• antifungal spray;
• antifungicides.

to contents ↑

How to remove fungus in the bathroom with folk remedies?

We offer you some effective tips on how to remove mold in the bathroom with folk remedies, which are likely to be in the arsenal of the kitchen and first-aid kit.

Method 1

In solving the problem of how to remove mold in the bathroom, a simple substance will help you - soda:

1. Pour baking soda liberally onto the affected area.
2. Pour table vinegar.
3. When the foam has settled, rinse off the remaining reaction with warm water and detergent.

Method 2

Another equally effective method to permanently get rid of the fungus in the bathroom:

1. Make the solution in the following proportion: for 4 parts of water, take 2 parts of peroxide, 2 parts of vinegar, 1 part of boric acid.
2. Wipe contaminated areas with a mixture.

to contents ↑

How to remove fungus on the tiles in the bathroom?

If the fungus affected the seams slightly and there are not many problem areas:

1. Use a special coating marker, based on a waterproof dye.
2. Coat the dirt.

Important! This method is extremely short-lived, since the fungus can multiply under the coating.

Remove extensive dirt as follows:

1. Thoroughly clean the stained area between the tiles with a stiff brush and then with an emery cloth.
2. Make a solution of chlorine bleach and water in a ratio of 1: 1.
3. Apply to the surface using a spray gun.
4. Rub with a toothbrush into the seams.
5. After drying, apply sealant to the joint between the bathroom and the tile.

In a situation where the old grout blooms profusely with fungus:

1. Open the tile seams with a rasp or an electric milling cutter.
2. Clean the seams.
3. Soil with an antifungal supplement.
4. Re-grout.

Wash the mycelium on the tile with a solution of aromatic tea tree oil:

1. Dilute in 1 cup of warm water 2 tsp. oils.
2. Spray on the tile.
3. Do not flush.

Important! Perform the procedure at night.

to contents ↑

How to wash mold in the bathroom if you are allergic?

Use borax, it does not emit harmful components and acts as a natural mold inhibitor, at the same time it plays the role of insecticide, herbicide and fungicide:

1. Dilute with water in a proportion of 1:10.
2. Apply to the fungal mold with a stiff brush.
3. Leave to dry completely.

to contents ↑

How else to remove mold from the walls in the bathroom?

If the problem of how to wash mold in the bathroom still remains relevant, use more aggressive methods.

Option 1

An excellent assistant in getting rid of mold is copper sulfate. This is an excellent tool for the prevention of all kinds of fungi. Please note that the drug is toxic, be sure to follow safety precautions when using it. The principle of use:

1. Dissolve copper sulfate in water in a ratio of 1:10.
2. Apply the composition with a brush on the surface to be treated, the areas affected by the fungus are especially greased with a thicker layer.
3. Leave for a few hours.
4. Wash and dry the treated surfaces thoroughly.
5. Ventilate the room well.

Option 2

For a better result, use the following solutions, which must be heated to a temperature of 50-70 degrees before application:

1. Dilute 1 kg of copper sulfate (iron sulfate) and 1.5 kg of sodium fluoride in 10 liters of water. Alternatively, you can use both copper and iron sulfate in equal parts of 500 g.
2. Mix in 10 l of water 1.5 - 2 l of vinegar essence and 0.5 kg of copper sulfate.
3. Make a solution in 10 liters of water, add 1.4 liters of vinegar, 400 g of boric acid and 0.9 kg of borax.

The principle of their application:

1. Apply the mixture to the surface with a paint brush or spray.
2. Leave to dry completely.
3. Repeat the procedure after a month.

to contents ↑

How to clean mold in the bathroom on the ceiling?

Mold loves to settle under the ceiling - there is the most comfortable place for its reproduction. It firmly eats into the surface and remove it, not only is not convenient, but also difficult. To get rid of black mold on the ceiling, use the above methods and methods.

Important! To avoid the appearance of new lesions after removing the problem, paint the ceiling and walls with waterproof paint.

to contents ↑

A few recipes on how to clean mold in the bathroom with sealant

If mold has formed on the surface of the sealant:

1. Use a strong bleach such as Domestos.
2. Pour the agent around the perimeter of the infected area.
3. Leave on for 5-10 minutes.
4. Rinse with cool water.

Important! When using this substance, silicone may turn yellow.

You can use the chemical agent Teflex Anti-Mold:

1. Soak the sponge with the product.
2. Wipe the focus of infection several times.

If the sealant is severely damaged, then to solve the problem of how to remove mold in the bathroom on silicone, proceed as follows:

1. Remove sealant completely with a sharp object.
2. Using a blowtorch, burn out all the locations of the fungus.
3. Scrape off any remaining material.
4. Treat the cleaned area with an antifungal solution.
5. Dry it.
6. Apply new sealant.

to contents ↑

How to remove mold from the curtain in the bathroom?

Mold will not pass by its “attention” and curtains. Once it has arisen, it cannot be removed simply with the help of the soul - more radical measures are required here.

Solution 1

1. Remove the curtain, get rid of the fittings.
2. Brush away most of the dirt.
3. Machine wash.

Important! To avoid material deformation, do not use high temperatures.

Decision 2

1. In a washing container with warm water, mix soda, vinegar or laundry detergent.
2. Place the curtain in the solution for several hours.
3. Rinse thoroughly.

Decision 3

1. Dampen a sponge in White.
2. Rub the problem area for a few minutes.
3. Wash your way.

Important! With the ineffectiveness of the above drugs, we offer another way than to remove the fungus in the bathroom. Modern industry has learned to fight fungus qualitatively and produces a lot of special tools, which allows you to remove mold and prevent its occurrence. Buy anti-fungicidal anti-corrosion agents at a hardware store, dilute in water as directed, and treat black spots. When choosing a chemical agent, be sure to make sure that it is aimed specifically at the destruction of mold, and not at its prevention.

to contents ↑

Stock footage

We hope that our tips were useful to you and you have already dealt with the fungus in the house. To prevent it from settling in your bathroom again, take timely preventative measures and follow simple rules to prevent mold.