How to remove mold on the walls in an apartment

Mold is a good sign only on expensive cheese of certain varieties, but not on the surfaces of your home. How to remove mold on the walls in the apartment, if it suddenly appeared and does not lend itself to cleaning, you must know. It is simply necessary to remove it, since it is harmful to health, and appearing in one place as a small island, the fungus will quickly spread throughout the apartment.

to contents ↑

Where does mold come from?

Before you remove the fungus on the walls, you need to determine why it occurred. Please note that if you ignore this nuance, after cleaning one surface, mold can easily occur in another place. Therefore, find out and neutralize the cause of its occurrence, and only then proceed to work.

Causes of mold:

1. High humidity in the room.
2. Poor ventilation or its complete absence.
3. Poor installation of windows.
4. The broken tightness of interpanel seams.

to contents ↑

How to remove the fungus from the walls?

There are a large number of tools for removing mold from surfaces. They are both chemical and natural, which are in every home. Depending on what method you will use to destroy the fungus, you may need such funds:

• “ArmMix Cleaner”;
• “ArmMix Antiseptic”;
• “ArmMix Universal”;
• “ArmMix - protection against fungus and dampness”;
• “Magniterm”;
• stationery glue;
• hydrogen peroxide;
• vinegar;
• vitriol;
• chlorine bleaches;
• ammonia.

You will also need such auxiliary tools:

• spatulas;
• spray gun;
• sandpaper;
• container for mixing solutions;
• roller;
• tassels.

Note: If you are a proponent of chemical processing, be sure to purchase everything you need in hardware stores. In addition to funds, you will need a respirator and rubber gloves, since working with chemicals is a must in protective clothing.

to contents ↑

How to remove mold from the walls with special tools?

Mold is propagated by spores and it does it very quickly, so it is important to remove it in the early stages. When you have noticed only a small speck, you should already take action. But it often happens that mold develops under the wallpaper and when it becomes visible, by then it is already decently growing. There is no question about how to remove mold from the wallpaper - you need to get rid of them as soon as possible.

When using chemical, professional means, work is divided into several stages and takes several days.

Stage 1

At this stage, use “ArmMix Cleaner”. By removing the cement layer, it opens the concrete for cleaning. Use it in the following sequence:

1. Remove all mildewed wallpapers, also clean wallpapers around 50 cm.
2. Take a putty knife and remove the stucco layer along with the mold.
3. Using a brush, treat the place of stripping with a tool.

Stage 2

The next step is antiseptic treatment of the walls. Thus, you destroy the fungus on the surface. When solving the problem of how to remove the fungus on the walls in the apartment, follow this step-by-step instruction:

1. Dry ArmMix Antiseptic soil in water, as directed by the manufacturer.
2. Using a roller, apply the solution to the wall.
3. Wait for the product to dry.
4. Repeat the procedure two more times.

Note: the product can destroy a large number of species of harmful bacteria and microorganisms, but it is toxic. Work in special clothes and ventilate the room to complete the process of solving the problem as quickly as possible, how to remove mold on the walls. Children and pregnant women should not be indoors for a week.

Stage 3

After you have disinfected the wall, use ArmMix Universal. It is designed for deep cleaning of the wall and removes remaining spores. This is how it is applied:

1. Take a clean roller.
2. Soak in primer.
3. Apply to the entire perimeter of the wall.
4. Let it dry.

Stage 4

To prevent the development of mold in the future, treat the wall surface with a waterproofing mixture “ArmMix - protection against fungus and dampness” and fix it with “ArmMix Universal” primer. Instruction:

1. Using a suitable tool, treat the wall with the first agent.
2. Leave to dry.
3. Apply primer to the entire treatment area.

Stage 5

At the final stage, use any plaster and heat-insulating paint “Magniterm”. Follow this sequence of actions:

1. Plaster the wall.
2. Wait until it is completely dry.
3. Apply paint and let it dry.

Note: After carrying out all the steps and obtaining a high-quality result to solve the problem of how to remove mold on the walls, you can proceed to the wall decor. Cover it with wallpaper, paint or decorative plaster. Ideally, this is how walls should be treated in every house during the repair process, if you do not monitor the temperature and humidity in the room. Then the fungus will never appear on your walls. But be careful - chemicals are toxic and can be harmful.

to contents ↑

How to remove mold on the walls of folk remedies?

Natural remedies can also remove mold from the walls. They are not harmful and are in almost every home. There are several ways to use them.

Note: Before using any of the following tools, you need to carry out cleaning work. Execute it, adhering clearly to such a scheme:

• Use any hard tool: a metal brush, sandpaper or a knife. Scrape off the mold.
• Dispose of the resulting material.
• Wipe the place to clean with regular detergent for dishes or floors.

After doing this work, proceed to the use of special tools.

Method 1

Use regular stationery glue as follows:

1. Dissolve glue 1: 1 with water.
2. Apply to the affected area with a brush.
3. Let it dry.

Method 2

Hydrogen peroxide copes with small areas of damage. If you just noticed a fungus that has not grown much, this remedy will suit you very well. It is applied as follows:

1. Without sparing, apply peroxide to the cleaned place.
2. You can repeat the procedure to consolidate the result.

Method 3

Any chlorine-containing product has antiseptic properties and neutralizes mold. Look at what you have available and use bleach or other means to solve the problem of how and how to remove the fungus on the walls in the apartment:

1. Dilute the product with water, where in 3 parts of water - 1 part of the product.
2. Apply to desired areas.
3. Wait for it to dry. Only then will it be possible to decorate.

Note: Do not use undiluted product - in its pure form, evaporation is harmful.

Method 4

With large areas of mold distribution, copper sulfate and vinegar are well suited. Follow these recommendations to quickly complete the process and easily cope with the task of how to remove mold from walls:

1. Dilute 0.5 kg of the product in 10 liters of water.
2. Add 3 tbsp. vinegar.
3. Using a roller, apply the solution to the wall.
4. Leave to dry.

Method 5

Similar to bleach, ammonia affects mold. It is suitable only for non-porous surfaces and is used as follows:

1. Mix ammonia and water 1: 1 and fill it with a spray bottle.
2. Spray on the affected area.
3. Ensure that the product dries in a well-ventilated area.

to contents ↑

Useful Tips

To prevent the appearance and propagation of fungus on the walls in the apartment, follow these recommendations:

1. Store well-dried clothes in the closets.
2. Keep track of the number of indoor plants and their adequate watering.
3. After the shower, do not close the doors in the bathroom tightly and, if possible, install a fan in this room. Use it after hand washing and taking a bath or shower.
4. During the next repair, take all necessary measures to prevent the appearance of the fungus.
5. Regularly, at least once every 3 months, pay attention to ceilings, floors, walls and furniture. This will allow you to detect the pest in time.

to contents ↑

Stock footage

Now you know how to remove mold on the walls in the apartment, and we hope that following our advice you quickly resolved the problem. In the future, try to warn her, so as not to waste time fighting fungi and not harm yourself and your loved ones!