How to clean the bath with soda and vinegar?





Unfortunately, the water quality in the taps of our houses leaves much to be desired. Even completely new plumbing suffers from its rigidity, which soon acquires a rather disappointing appearance. And if we are talking about a bathtub that is older than the universe itself - everything is complicated here, but even in the most sad situation, you can try to fix everything, for example, clean the bathtub with soda and vinegar. These substances, so simple at first glance, in combination can work real miracles. You will learn about how to clean the bath at home with these and other equally affordable and safe means from this article.

to contents ↑

What should I think about when choosing a cleaning product?

There are many answers to the question "How to wash a bath?" On the shelves of shops there is a wide variety of chemistry, which promises to cleanse the bath once and for all from plaque.

But the bitter truth is that at least half of these well-publicized products are actually useless, and the other half can do irreparable harm to your bath (eat enamel).

Important! Do not forget about the safety of these funds. If you just think for a second that children who climb into the bathroom, which you just washed with some kind of chemical muck, become ill at ease. Therefore, everyone is looking for a way to maximize the effectiveness of the detergent with minimal harm to their health and the appearance of the bathroom.

to contents ↑

How to clean the bath at home?

Surprisingly, our mothers and grandmothers managed to keep the bathtubs perfectly clean without the help of various chemicals. And they did not use magic for this, but just could clean the bath with soda and vinegar. Maybe we should try to clean the old bath to shine using the methods that were successfully used before the breakthrough in the development of the chemical industry?

Soda

The universal remedy is soda. It not only removes dirt from the surface of your bath, it also disinfects it. Its application is also very simple. Need to:

• dilute soda with water to make a kind of gruel;
• apply it to pollution;
• wait until it dries;
• rinse off with water.

Especially effective is cleaning the bath at home, when the pollution is not so significant. Otherwise, repeat the procedure several times.

Vinegar

Using such an affordable product as vinegar will also not cause you any difficulties. To do this, just apply the liquid to the surface of your bath and leave for a while.

If there are bright spots of lime or rust on the surface, use paper towels:

1. Pre-moisten them with vinegar.
2. Apply to contaminated bath areas.
3. Wait a few hours, then simply rinse the vinegar with water.

Important! Cleaning the bath at home will be even more effective if you first apply soda powder, and then pour the surface of the sanitary ware with vinegar. The alkaline reaction will quickly corrode the entire plaque and you will get a sparkling bowl.

Toothpaste

Surprisingly, in everyday life, toothpaste can be used not only for its true purpose. It removes stains well from any surface.Including it is applicable in the event that you decide to clean the bath with soda and vinegar, as well as try other improvised means.

For a more noticeable result, proceed as follows:

1. Apply powder or paste to problem areas.
2. If it is a powder, moisten it a little with warm water.
3. Arm yourself with a sponge or an unnecessary toothbrush.
4. Rub the plaque spots.
5. Rinse thoroughly with clean water.

Lemon acid

Lemon is a natural bleach and cleaner, and acid acts even more effectively if you need to restore the beauty and purity of various surfaces. Cleaning the bath at home with citric acid will also be very appropriate, and besides, it will also give a disinfecting effect.

Use this lime and rust cleaner in this way:

1. Dilute a bag of citric acid in a glass of water.
2. Treat the surface of the bath with this solution.
3. After 15 minutes, wash the bath with a sponge: wipe where there are stains - they will disappear.

Important! Never use this method without wearing rubber gloves.

to contents ↑

Clean acrylic bath at home

Acrylic bathtubs are in great demand today. This material has many advantages, but there is also one drawback: such baths require very careful and careful care.

Important! The methods that are used to clean enameled baths should in no case be used for acrylic.

The first rule that you definitely need to remember: do not clean acrylic bathtubs more often than 1 time in 2 weeks. But at the same time it is necessary to disinfect every week. In order to do this, there are many special products that are poured into a bath of water.

After the time necessary for the interaction of the product with dirt expires, thoroughly rinse the bath, after draining the water. A good alternative to various special-purpose products (disinfectants) is laundry soap. They can treat the surface of the bath, and then simply wash it with water.

Important! Do not use any means and powders that contain such substances for cleaning acrylics:

• Alcohol;
• Chlorine;
• Acetone;
• Alkali;
• Ammonia;
• Acids;
• Formaldehydes.

to contents ↑

Bathroom Care Tips

We have already told you how to clean bathtubs of various types from plaque and other dirt. And so that pollution appears as rarely as possible, you just need to follow the elementary general rules of care.

Important! Be sure to take into account the material from which the plumbing is made.

Cleaning gels or pastes instead of powders

It is best to completely abandon cleaning powders, because they contain crystalline particles. They are more suitable for cleaning metals and metal bathtubs.

Important! In other words, the powder scrapes dirt off the surface, thus cleaning and, at the same time, damaging it. As a result, microcracks or scratches may appear, due to which the overall service life of the product is significantly reduced.

Use a soft sponge or rag.

When choosing a handy device that can wipe or wash the bath, do not use hard brushes. They are likely to damage the coating of your bathtub.

Ventilate the bathroom after bathing.

The easiest way to care for a bathroom is to air it. Dampness is the worst enemy of enamel, it destroys it. And also because of it, mold may appear in the bathroom. For this reason, after bathing, it is worth leaving the bathroom door open.

Wash your bath after yourself

To prevent the appearance of plaque and yellowness, thorough rubbing with a soft, dry rag of the bath after bathing. This is a very simple and effective way, so that there is no need to often clean the bath with soda and vinegar.

Regular care

An obvious and very simple way that takes no more than 5 minutes of your time per day.Clean your bath regularly and it will never turn yellow, its surface will not be covered with complex stains, for the removal of which you will have to use harsh chemicals. Wiping the surface daily with a soaped sponge and then rinsing it with water will make your bath always be in perfect condition.

Items that rust - do not leave them in the bath

Rust is formed on objects containing a metal base. For example, it can be razors and bottles with shaving cream. Then corrosion goes to the surface of your plumbing. But recently you did a bath cleaning at home and spent your energy - you must respect your work.

Important! Do not use toilet products to clean the bath. Even despite the fact that the label says that they are suitable for all plumbing, the chemicals contained in the composition are quite aggressive. As a result, the less durable bath enamel simply collapses.

to contents ↑

Stock footage

If you have an alternative - to use household chemicals or to clean the bath with soda and vinegar, always give preference to the second, safer option. So you will not only make an invaluable contribution to your health, but also delay the moment you need to buy new plumbing, which is by no means cheap.