How to wash potassium permanganate from a bath

Potassium permanganate baths are often used for bathing children, and doctors also recommend adults to treat certain diseases. One drawback of this procedure is the staining of the bowl itself, and it acquires a characteristic pink tint either completely in the entire coating, or partially in spots. It is at this moment that the reasonable question arises: how to wash potassium permanganate from the bath? This problem is complex, but quite solvable - our experts share their recommendations for cleaning.

to contents ↑

How to clean the bath to wash potassium permanganate?

When choosing a suitable product, keep in mind that this may not necessarily be special household chemicals. In many cases, improvised means from the category of “folk” help. A complete list of possible options includes:

• soda;
• bleach;
• oxygen concentrate stain remover;
• oxalic or citric acid;
• hydrogen peroxide;
• vinegar;
• chemicals - Domestos, CIF, Amway;
• repair kit for acrylic bathtub.

to contents ↑

How to wash potassium permanganate from a bath?

Depending on the cleaning agent you choose, the stain removal technology will vary. To get the desired result, be sure to follow the rules of the instructions below for each cleaning agent.

Method 1

If you have an acrylic bowl, and the solution has greatly changed its color, and large spots are visible on the surface, it is easiest to use a special repair kit. For this:

1. Print the package.
2. Remove the fine sandpaper.
3. Moisten the coating lightly.
4. Rub acrylic with sandpaper.
5. Fill with a special paste.
6. Wait until it is completely dry before next use.

On a note! Such sets are sold in almost every hardware store and they are inexpensive. So this cleaning option can be attributed to economical.

Method 2

A very popular home remedy for cleaning any surface from various contaminants is ordinary baking soda. It can be used to whiten a bathtub from various materials. For this:

1. Lightly dampen the bowl inside from the shower.
2. Wet the sponge.
3. Dip it in soda powder.
4. Rub stains with potassium permanganate.
5. Rinse the entire bowl from the shower with water to remove all soda residues well.

Method 3

Another very simple, fast-acting, but at the same time very effective method is soaking. To execute it correctly, follow these steps:

1. Get a full bath of warm water.
2. Add bleach or oxygen cleaner.
3. Wait half an hour - it is better to leave it all night, if possible.
4. Drain and rub lightly with a sponge at the same time to completely remove traces of potassium permanganate.

On a note! Professional household chemicals can be replaced with vinegar, oxalic or citric acid. But in this case, a full bath with a solution should be kept throughout the night - otherwise the result will not be so high-quality.

Method 4

To wash off individual spots that appear, do the following:

1. Dissolve vinegar, citric or oxalic acid with water in a ratio of 1 teaspoon per 100 g.
2. Dip a sponge or cotton pad into the solution.
3. Rub the stain.
4. Leave for half an hour.
5. Rinse off with hot, followed by warm water.
6. Repeat the procedure several times until the trace of potassium permanganate is completely gone.

Method 5

A medicine that can help deal with this problem is hydrogen peroxide.To bleach the bath after staining with potassium permanganate, do the following:

1. Moisten cotton or sponge in hydrogen peroxide.
2. Rub the stain.
3. If the effect is not immediately noticeable - leave it on for 15-20 minutes.
4. Rinse with running water.

Method 6

Perfectly cope with any type of pollution, including from medical solutions, household cleaning products such as Amway for bath or for the oven and Domestos. The exact instructions for use are written on the packaging by the manufacturer. Often it looks like this:

1. Apply the product on the surface so that it covers the stain or completely the entire inside of the bowl, if it has turned all pink.
2. Wait for the indicated time - usually about 1 hour.
3. Brush or sponge while rinsing with running warm water.

Important! When using such concentrates, always work with rubber gloves, turn on the hood, and after completing the procedure, leave the bathroom open for a while so that the pungent odor quickly disappears.

to contents ↑

Stock footage

If you have a need to wash potassium permanganate from a bath, use our useful tips. The result will surely please you!