How to wash a shower cabin?

Installing a shower instead of a full bath is becoming an increasingly popular solution, especially in small-sized apartments. At first, it pleases with its mirror shine and purity, but in the process of operation, limescale deposits and stains appear on the surface. The device of the cabin uses a lot of materials that have different properties, so the question arises of how to wash the shower and remove plaque.

to contents ↑

Cleaning the shower cabin - views

If you regularly take care of the shower cabin, remove lime and soap deposits in time, then this work will not seem so difficult for you.

Regular cleaning

1. Rinse thoroughly all internal surfaces after each visit, using hot water and then cold.
2. When deciding how to wash the shower stall to remove soap deposits, use a dishwashing detergent.
3. Complete the dry cleaning procedure with a dry, soft cloth.

Scheduled cleaning

Perform a more thorough cleaning procedure every two weeks with the use of special tools. If you don’t know how to wash the shower, take note of the following recommendations:

1. Sprays used for washing glass and plastic surfaces can cope with the formation of limescale.
2. Use gels and creams designed for cleaning various plumbing.

Important! Give preference to products of trusted brands, then all the work will be faster, more efficient, and you won’t have to rub the surfaces hard and for a long time in order to return them to their original attractiveness and cleanliness.

How to wash a shower cabin:

1. Apply prepared products to the walls and doors of the structure using a synthetic sponge.
2. If contamination is negligible, flush immediately. If you fly several weeks, leave the funds for 15-20 minutes.
3. Wash off the mixture of dirt and preparation using a scraper.
4. Rinse the cubicle with clean water and wipe dry.

Important! Only apply chemicals by protecting your hands with rubber gloves.

Intensive cleaning

Effective, potent preparations, which are produced in the form of pastes or creams, will help to remove strong impurities, which usually occur in separate parts of the cab. The principle of their application is the same as described above. More detailed instructions are described in the section below.

The problem areas include:

• the area around the drain;
• spray;
• cranes
• door leafs.

Important! This method of how to wash the shower cabin is used if there is a strong limescale, mold or rust. It can also be used if plumbing has not been used for a long time.

to contents ↑

How to choose a shower cleaner?

In order not to harm the surfaces of this device, as well as to cope with pollution efficiently, it is necessary to find out what materials it is made of. The choice of means depends on this.

The following materials are mainly used in the manufacture:

• glass, plastic or polystyrene is used for the manufacture of walls, roofs and doors;
• ceramics, artificial or natural stone, acrylic, enameled surface - are used in pallets, as well as in the decoration of one or more walls;
• chrome steel is used for the manufacture of a mixer, spray nozzles, in some cases for handles and door hinges;
• painted aluminum is used for the manufacture of frames and rails.

Important! Regardless of the materials from which the plumbing and its components are made, do not use rough cleaners, as well as hard brushes, metal brushes, when cleaning.

to contents ↑

How to wash a shower cabin?

To wash the booth, you can use the following materials and tools:

• polyurethane or rubber scraper;
• soft rag;
• synthetic sponge;
• Toothbrush;
• cleaning sprays and gels;
• means for glasses and mirrors;
• citric acid, vinegar;
• spray gun;
• special steam cleaner.

After you have prepared the necessary funds, proceed to cleaning:

1. Moisten the walls of the cabin with warm water and apply a cleaning gel to the sponge.
2. Clean the shower cabin from all sides - to remove dirt in hard-to-reach places, use an old toothbrush.
3. Wash the doors from the inside, being in the middle of the cabin.
4. Remove the detergent from the door with a scraper that removes even dirt that is invisible to you.
5. Rinse the product thoroughly so that no streaks remain on the surface.
6. To wash the shower stall from limescale and soapy stains, use potent creamy or pasty preparations. Apply funds to problem areas and rinse with running water after the time specified on the packaging.
7. To give shine to a shower cabin, moisten a soft towel with liquid for glasses and mirrors and wipe it from all sides. Stains will be permanently removed, and the walls will be protected from dust.

Important! If, after applying strong remedies, the spots still remain, use a weak (5-10%) solution of vinegar or lemon juice. If a fungus appears on the walls of the booth, treat the problem areas with a weak chlorine solution, then rinse the surface with clean water and wipe dry. Be sure to ventilate the room after the procedure.

to contents ↑

Folk remedies in the fight against pollution

1. To clean the glass, mirrors and taps, you can use the following solution: 1 tbsp. l vodka and 2 tbsp. l water. Dampen the contaminated surfaces with a soft cloth dampened in this solution and then wipe dry.
2. To clean metal elements or an acrylic tray, use regular toothpaste. Apply it to the desired area with a thin layer, then rinse with water.

Important! Rinse the toothpaste off the surface immediately, otherwise you will then have to wipe the dried up.

1. Vinegar will help you get rid of rust. Spray it from the spray bottle onto the surface, and after half an hour wash it thoroughly.
2. To the surfaces of the shower cabin shone, use the following solution: 20 g of soda, 30 g of citric acid, mix in 1 tbsp. warm water. Pour the prepared product into the spray bottle, shake well. Spray onto tile or walls of the shower stall. Leave the product for 10 minutes and then rinse with water.

to contents ↑

Helpful hints:

1. Get special acrylic bath cleaners if you have a plastic cabin. For glass cabins - window cleaner. Apply them to the walls of the cab during cleaning. Rinse off after 10-15 minutes. In this way, you will prevent the appearance of plaque, as well as prevent the formation of soap sediment. So - the problem of how to wash the shower cabin will be solved much easier each time.
2. We do not recommend the use of powder products, even if they are universal.
3. Use scrapers and brushes to prevent contamination of the shower. Due to the tight and soft fit, they perfectly remove plaque even without special means. Use a scraper every time after a shower.
4. To prevent mold from starting, regularly carry out preventive maintenance: ventilate the bathroom, and also apply a spray for shower cabins to the sealant after washing.Keep the cab doors slightly ajar so that excess moisture evaporates faster.
5. When deciding how to wash the shower cabin, do not use chemical solvents so as not to spoil the integrity of the coating, especially in the case of plastic walls and acrylic pallets.
6. Do not use aggressive and abrasive compounds like the “Toilet duckling”. For plastic and acrylic, use special products designed for them.
7. After using potent agents, rinse the shower stall thoroughly so that any remaining vapor does not lead to poisoning.
8. Dry all surfaces of the plumbing thoroughly to prevent limescale from forming, as drops of water contain large amounts of calcium and chlorine.
9. Spray soap, toothpaste, shaving foam and wash immediately after taking a shower.
10. Pay particular attention to tile joints that often become bacteria.
11. Clean the openings with cleaning powders and tile cleaners.
12. When using cleaning products, make sure that they do not contain: formic acid, organic solvents (acetone, gasoline), formaldehydes.
13. To avoid unpleasant surprises, carefully read the instructions for the shower cabin and used detergents before use. Some manufacturers recommend applying a special composition to the entire surface of the shower cubicle before first use, which will facilitate future care, as well as give the surface water-repellent protection.

to contents ↑

Stock footage

Cleaning the bathroom is not such a long and laborious process, but it requires regularity. If you look after a shower cabin in compliance with all recommendations, then it will serve you for a long time.