How to clean a bath at home with soda and vinegar?

The cleanliness of the bathroom should be perfect. But very often, regardless of the frequency of use and accuracy of the owners, plumbing loses its former beauty and becomes covered with ugly spots. How to clean a bath at home with soda and vinegar? This and some other effective methods of cleaning a sanitary ware are described in our article. Putting into practice simple and effective tips, your bathtub will regain its original appearance.

to contents ↑

Causes of bath contamination and solutions

Over time, even the most expensive and high-quality plumbing loses its luster and snow-white cleanliness. Limescale deposits on surfaces many times faster from frequent showering. What can we say about taking a bath. Poor water, the lack of proper care for plumbing, and a long service life are some of the main causes of pollution in the bathtub. Agree that unattractive rust spots, plaque on the surface, faded color of plumbing not only spoil the reputation of the owners, but also give reason to doubt the sanitation of the whole house.

In order to solve this problem, there are several options:

• Replace all plumbing with new;
• Give to the masters for restoration;
• Clean the bath with soda and vinegar;
• Use special household chemicals.

Today, the department of household chemicals has a huge assortment of goods, with which, according to the packaging, you can easily cope with any pollution - plaque, rust, soap stains and so on. But few people know and apply the old time-tested method - to wash the bath from a yellow coating at home with soda and vinegar. A tool made from these components can restore the luster and purity of even too dirty plumbing. We will talk about this cleaning option later.

to contents ↑

How to clean the bath with soda?

Plumbing, like all other interior items, needs constant care - this is one of the most important conditions for maintaining cleanliness and hygiene in the house. For cleaning, there is no need to purchase expensive fluids that contain caustic and abrasive substances. At home, you can clean the bath ordinary or soda ash.

Benefits of cleaning a bathtub with soda:

• Soda perfectly eliminates fresh traces of rust and plaque.
• The product can be safely used on enamel coated products.
• The substance is an excellent antiseptic. By treating it with a surface, you can easily eliminate harmful microorganisms, unpleasant odors, and prevent the formation of fungus.
• Periodic cleaning of plumbing with soda will reduce cleaning time, save the family budget and will not harm your health.
• Sodium bicarbonate is harmless and does not cause allergies, does not leave burns on contact with human skin.

Important! To ensure complete safety, rubber gloves should be worn while cleaning.

Cleaning method:

1. Treat a contaminated surface with a small amount of soda.
2. Using a stiff brush, rub the product thoroughly.
3. Leave the product for a better effect for 1-1.5 hours.
4. After time, rinse the soda with warm water.
5. For a better and more effective surface cleaning, use citric acid. Dilute it with water in a proportion of 0.5 l of water 1 tablespoon of acid.
6. First of all, apply soda, rub with a brush, after 10-20 minutes, wipe the surface with a solution of citric acid.
7. Leave the product for another 30 minutes; at the end, rinse thoroughly with warm water.

to contents ↑

How to clean the bath with vinegar?

The problem of plaque and rust formations on the surface of the bathtub is also effectively handled by vinegar - a product that is always at hand in every home. Applying vinegar to the cast-iron bathtubs, the shine of the plumbing is restored with a slight movement, pollution of various complexity is removed.

Processing Method:

1. Wetting small areas of the surface with liquid is a tedious and time-consuming task. To speed up the process, you need to moisten large wipes and cover them with the entire bath inside.
2. Leave the product for 2-3 hours for a better effect.
3. After the time has passed, remove the napkins and rinse the bath thoroughly with warm water.

to contents ↑

How to clean rusty stains on the bathroom with vinegar?

The appearance of rusty formations on the bathroom for the most part depends on the state of our sewage system. Water passing through old pipes leaves imperceptible marks on the surface, which over time turn the new bathtub into an old and not aesthetic plumbing. Using a solution of vinegar, you can get rid of stubborn rusty stains.

Cleaning Option No. 1:

1. Vinegar is heated in a pan with sodium chloride to a temperature of 50 degrees.
2. Using a sponge or brush, apply a small amount to the rust.
3. Leave the product for 30 minutes.
4. At the end, wipe the treated area with a damp cloth.

Cleaning Option No. 2

1. Fill the bathtub with hot water. To the level of pollution.
2. Pour in approximately 600 ml of 9% vinegar into the water.
3. Leave the vinegar water for 4 hours.
4. At the end, rub thoroughly with a brush and rinse with water.

Important! To ensure that plumbing retains shine and cleanliness longer, wipe it with vinegar after each bath. After this treatment, be sure to rinse the surface with cold water.

to contents ↑

How to clean the bath with soda ash?

The properties of soda ash are significantly different from ordinary soda, which we use for cooking or cleaning not soiling. Soda ash has an increased alkaline balance. In the home, it is used for washing and removing more stubborn stains and chronic defects.

Important! Raw materials, unlike baking soda, are a strong cleaning agent, so be sure to wear protective gloves when working with them, and observe safety precautions.

There are many recipes for making liquids to wash your bath with soda ash, which are easy to prepare at home. The result after the cleaning will delight you, and for the preparation of the product all the necessary components you can easily find in the home.

Method number 1

You will need:

• Laundry soap (grated or ground).
• Soda ash and baking soda.
• Ammonia.

Cleaning sequence:

1. Mix in a small container in a ratio of 1: 1 mixture of soap and soda.
2. Add 3-5 drops of ammonia.
3. Fill with water and mix thoroughly until all components are completely dissolved.
4. The resulting composition treat contaminated areas.
5. Leave the product for 2 hours.
6. Rinse off with plenty of running water.

Method number 2

The second method involves the use of household soda in combination with vinegar. So, how to clean the bath with soda ash and vinegar?

You will need:

• Baking soda and soda ash.
• Bleach.
• Table vinegar 9%.

Processing sequence:

• In a small container, mix baking and soda ash in equal parts.
• Add as much bleach and vinegar to this container. Mix thoroughly until a homogeneous mixture is formed.
• Next, the resulting slurry is applied to the contaminated area of ​​the bathroom, left on the surface for 20 minutes.

Important! To achieve a faster and better result, the spots are treated with a solution of bleach and vinegar and left for another 30 minutes.

• At the end, rub the treated area thoroughly with a brush and rinse off any remaining material with warm water.

Option number 3

Bleach is added during the washing process in order to enhance the effect of the powder. In our case, to enhance the effect of baking soda or soda ash, it is also necessary to use bleach. To prepare the following remedy, you will need:

• "White".
• Soda ash.

Cleaning sequence:

• First of all, we clean the bath with soda, then we apply bleach on the cleaned surface and leave it for 20-30 minutes.

Important! After a while, the bathtub will be washed away from visible rusty smudges and the enamel will regain whiteness.

• Finally, rinse the bath thoroughly with cold running water.

Important! It is not recommended to use this method of cleaning more than 2-3 times a month. “Whiteness” is a chemical in its composition - the vapors released by the liquid are very harmful to health.

to contents ↑

Bathroom Care Tips

In order not to encounter a problem in the future and not look for options on how to clean the bath at home with soda, vinegar or bleach, we recommend remembering some practical tips regarding caring for the bathroom:

• After each bath or shower, rinse the bath with warm water and dry with a towel.

Important! Ensure that all family members adhere to this rule.

• To avoid rusty smudges and deposits on the coating, wash it as it gets dirty.
• It is recommended to wash the bath no more than 4 times a month. Acrylic products should be washed no more than 1 time per month.

Important! Using household chemicals for cleaning, strictly follow the instructions on the packaging, otherwise - such a delicate surface can be damaged.

• In the household chemicals department, purchase products specifically designed for one or another type of bathtub.
• Plumbing with an enamel coating is strictly forbidden to clean with metal brushes, as well as to process with agents that include acids.

Important! These components destroy the coating, and unfortunately, it will not be possible to restore it.

• Manufacturers do not recommend to treat the acrylic coating of bathtubs with abrasive substances, such as baking soda and washing powder, alcohol-containing liquids, gasoline, acetone, as well as liquids containing chlorine.

to contents ↑

Stock footage

Timely care of the bathroom will preserve the pristine shine and novelty of all parts, as well as extend their life. Use the recommendations from the article to clean the bath with soda ash and vinegar, and your plumbing will shine for a long time, and taking a bath will bring real pleasure.