How to clean the pan from soot

Now the market has a huge selection of pans made of different materials. Whatever type of dishes you choose, to know how to clean the pan from soot is simply necessary. This type of dishes is constantly in contact with fat, so even the most accurate housewife is faced with its sticking and the formation of a layer of burning. We will tell you how to remove grease from pans from pans of various materials and varying difficulty.

to contents ↑

How to remove carbon deposits from the pan?

Depending on what material your dishes are made of, you may need such cleaning products:

• dishwashing detergent;
• cleaning powders for dishes;
• soda - food or calcined;
• laundry soap;
• salt;
• vinegar;
• silicate glue.

Necessarily required:

• double-sided sponges - soft and hard;
• nylon washcloths;
• metal brushes or brushes;
• soft rags, such as microfiber.

to contents ↑

How to clean a ceramic pan from carbon deposits?

This type of cookware is very convenient to use, so more and more housewives prefer to see it in their kitchen. The food does not burn on it and retains nutrients. It is very important to properly process it before first use - this will guarantee that you do not often have to deal with the problem of constant sticking of fat on the surface.

To do this, do the following manipulations:

1. Wash the pan.
2. Wipe dry.
3. Put the dishes on the fire.
4. Put in it 5-6 tbsp. l salt.
5. Warm up for 15 minutes.
6. Now you can safely cook her food, and it will not burn for a long time.

To clean ceramics from grease and carbon deposits quickly and easily, follow these step-by-step instructions:

1. Take a deep container.
2. Pour half the water into it.
3. Add 1 bar of grated soap to the water.
4. Pour 200 g of soda ash to the soap.
5. Mix well.
6. Place a container of mortar on a fire.
7. Place a skillet in the water.
8. Simmer for 2-4 hours.
9. Remove the pan and place it under running hot water.
10. Wipe it well with a sponge.

Do not forget about the daily care of ceramics after each use. It is as follows:

1. Wait for the pan to cool.
2. Place it under running warm water.
3. Apply detergent to the sponge.
4. Rinse the dishes.

Remember! Strongly unsuitable methods for cleaning ceramics:

• Do not wash under cold water;
• temperature differences must not be allowed;
• Do not use abrasive cleaners.

to contents ↑

How to clean a Teflon-coated pan?

This type of coating has non-stick properties. Even if the food burns, it does not stick to the surface. But all this will correspond to reality if the daily care is correctly performed:

1. Wait for the pan to cool.
2. Fill the entire inner surface of the dishes with warm water.
3. Rinse with a soft sponge.

If the non-stick surface of the pan has been damaged, carbon deposits may form at the points of damage. To correctly remove it, do this:

1. Remove all leftover food with a wooden spatula.
2. Put it on low heat.
3. Fill the bottom with salt.
4. Wait until it turns brown.
5. Remove from heat.
6. Get rid of salt and let cool.
7. Wipe the pan with a clean, dry cloth.

Remember! Teflon pans it is impossible:

• clean with aggressive abrasive cleaners;
• clean with hard metal washcloths.

to contents ↑

How to clean carbon deposits from a cast iron skillet?

Cast iron should be removed when it is still hot. When food cools, it dries to the surface. In order to clean the soot from a cast-iron skillet do this:

1. Add 2 tbsp to the bottom of the pan. l salt.
2. Pour them with vinegar so that covers the entire area of ​​the dishes.
3. Put the pan on the fire.
4. After boiling, add 100g of soda.
5. Set the fire to a minimum.
6. Wait for the whole solution to boil.
7. Rinse under warm water.

If carbon deposits are old and multi-layer, this method is well suited:

1. Place the pan over medium heat.
2. Fill half the dishes with soda.
3. Warm up 30 minutes.
4. Remove the soda.
5. Rinse under cold water with a stiff brush.

Another good way to remove carbon deposits from a cast iron pan:

1. Take a deep 10l pan.
2. Pour 8l of water.
3. Add 100g soda and 80g silicate glue.
4. Put the pan in the solution.
5. Boil for 40 minutes.
6. Remove from heat and let cool.
7. Treat the soot with a stiff brush.
8. Rinse the dishes in running water.

Note: glue and soda can be replaced with laundry soap, previously grated.

In order to prevent the appearance of soot, it is necessary to observe adequate daily care for cast-iron utensils. It is as follows:

1. Wash the pan immediately after cooking.
2. Do not soak in the dishwasher.
3. Wash in hot water with a nylon washcloth.
4. Be sure to wipe dry.
5. If necessary, calcined with sunflower oil.

to contents ↑

How to clean the aluminum pan from carbon deposits?

Such dishes are considered the most sensitive to any type of cleaning. She does not like:

• alkalis and acids;
• mechanical impact;
• metal brushes and abrasive washcloths;
• aggressive detergents.

The aluminum frying pan endures a soft sponge and detergent for daily care. If soot has formed, then proceed with caution. Use this step-by-step instruction:

1. Take a deep container.
2. Pour in half the water.
3. Add soda, detergent and 0.5 tbsp. vinegar.
4. Place a container of mortar on a fire.
5. Place a frying pan in it.
6. Boil for an hour.
7. Wait until the pan cools directly in the solution.
8. Remove dirt under running water with a soft sponge.

Note: this procedure should be done in a well-ventilated area.

The calcination method relieves aluminum pans from carbon deposits very well. It is done like this:

1. Remove remaining food from the pan with a wooden spatula.
2. Put it in the oven.
3. Leave on for 30-60 minutes.
4. Remove any remaining dirt with water and a soft sponge.

to contents ↑

How to clean a stainless steel pan?

You can use the heating of salt in a bowl until all the fat has moved away from the surface, and activated carbon can be used. For this:

1. Grind the required number of tablets.
2. Sprinkle powder on the burnt places so that the mixture completely covers the soot.
3. Pour in warm water.
4. Leave on for 20-30 minutes.
5. Wash with a detergent sponge.

to contents ↑

How to clean any pan from fat?

There is a universal method that can be used on dishes made of any material. For this:

1. Rub 0.5 bars of laundry soap onto the bottom of the pan.
2. Pour boiling water.
3. Put on fire.
4. Boil for 15-20 minutes.
5. Rinse with running water.

to contents ↑

Stock footage

The best way to remove carbon deposits from any pan is to wash it in time and not start it. Then your dishes will serve you for a long time and please the eye. If it was not possible to prevent the problem, use our tips so as not to waste a lot of time and effort - return the attractiveness and practicality of your dishes quickly and easily!