How to clean the tap of limescale at home?

Every person at least once in his life faced a problem than removing limescale from a tap, but few thought about the true reasons for its appearance. The fact is that in the water that is supplied to our homes and apartments through pipeline systems, various mineral impurities are always present. Their number may vary depending on the area of ​​residence, but they still exist and have a direct effect not only on the hardness of the water, but also on the formation of an unpleasant coating on the internal and external surfaces of the pipeline equipment. In this article we will tell you how to clean the tap of limescale, how to wash scale in the kitchen in the kitchen, how to wash the tap from a stone at home and how to avoid further pollution.

to contents ↑

How to avoid plaque formation?

In the care of any sink, shower or bathtub, it is best to try to avoid the formation of limescale, than to then put a lot of effort to get rid of pollution. To facilitate the care of household plumbing, it is recommended to observe the following rules for its operation:

  • after each use of the sink or bath, thoroughly rinse the bowl and faucet, as well as wipe them dry with a soft cloth;
  • carefully remove every drop of liquid on the plumbing to avoid the formation of dry streaks;
  • every month should be given time to thoroughly disinfect the bathroom, which will prevent the formation and reproduction of mold and fungi, which can lead to health problems.

Observing these simple rules, which take no more than a couple of minutes, you can not think about the problems associated with clogging faucets and the need for weekly cleaning of taps for a long time.

to contents ↑

How to clean the tap from limescale?

If the crane still got unpleasant pollution, then you can get rid of them using several methods. The main difficulty here is that these structures usually have a relief surface. To achieve the desired result, be patient and use one of the following cleaning methods.

Method No. 1 - Acetic solution

A concentrated solution of vinegar with water, which is prepared in a 1: 1 ratio, will help clean the tap of limescale at home.
4

Clean the surface of the tap as follows:

  1. In pre-prepared dishes in an equal amount mix water and table 9% vinegar.
  2. Moisten a kitchen sponge in the prepared solution.
  3. Thoroughly surface the surface of your faucet.
  4. Rinse the structure with running water.
  5. Dry the faucet with a dry, clean and soft cloth.

Important! If the plaque is already old and large, it is better to unscrew the tap and place it in a container with such a solution at night. This time will be sufficient for the effective splitting of salt deposits on the metal surface.

Method 2 - Hot Acetic Acid

To clean the tap from limescale, you can use acetic acid in a different way:

  1. Preheat, but do not boil, vinegar - table solution should be warm, but not hot.
  2. Soak a soft cloth in the resulting liquid.
  3. Wrap the material around your crane.
  4. Leave the plumbing in this condition for half an hour or an hour.
  5. Rinse the surface of the tap thoroughly - it is best to use warm water.
  6. Dry the faucet with a soft cloth.

Important! When working with vinegar, be sure to use personal protective equipment - rubber gloves and a respirator. These precautions are necessary to protect the skin of the hands from irritation when interacting with acid. It is also very important to protect the respiratory tract, because when evaporated, vinegar has a rather pungent smell, inhalation of which in large volumes can lead to irritation of the nasopharynx mucosa.

Method 3 - Citric Acid

A sufficiently high cleaning effect has a solution of water and citric acid. Cleaning using this tool is as follows:

  1. Turn off the tap.
  2. In a container of suitable size, prepare a solution of water and citric acid, which should have the following proportions - 4 tablespoons of cleaning agent is added to 1 liter of liquid.
  3. Dip the plumbing piece into the resulting solution and leave it to soak for 1-2 hours, you can overnight.
  4. After this time period, remove the tap from the solution and rinse under running water.
  5. Wipe the washed surface dry with a soft and clean cloth.
  6. Attach the faucet to its usual place.
    2261_0_s

Method 4 - Baking Soda and Soap

Simple cleaning products, such as laundry soap and baking soda, are likely to be at hand for every housewife. However, not everyone knows that with their help it is enough to simply remove the limescale from the tap. To achieve the highest quality result, follow these cleaning guidelines:

  • Dissolve a bar of laundry soap in hot water.
  • Add a small amount of table soda to the resulting thick solution.
  • Moisten a kitchen sponge in the prepared detergent and thoroughly treat the surface of the tap.
  • After cleaning, rinse the remaining soap with running water;
  • The surface of the tap must always be wiped dry with a soft cloth.

Important! In the hard-to-reach area of ​​the tap, you can clean with a soft-bristled toothbrush. To clean embossed surfaces, a special microfiber cloth is perfect.

to contents ↑

The use of household chemicals

You can also clean the tap of limescale using specially designed cleaning products that are sold in every household chemical store. However, when choosing and using chemicals, several very important points should be considered:

  • You can use only those products that are designed for the treatment of chrome surfaces, in no case do rust compounds, bleaches and detergents for toilets be suitable. This is due to the fact that the chrome coating is very active chemically and can react with acids, which will inevitably lead to the destruction of the surface of the tap.
  • Give preference to liquid detergents, as abrasive substances can cause small scratches on the surface of the tap, which will significantly reduce its aesthetic appeal.
  • Do not mix several chemicals together, but use only a specific cleaning agent.
  • In the process of using chemicals, be sure to use personal safety equipment that will protect the mucous membrane from chemical burns, and the skin from irritations.
    to contents ↑

    Stock footage

In this article, we shared with you the most effective methods of how to remove limescale from the tap, and sincerely hope that following these recommendations will help maintain the cleanliness of your plumbing.

1 star2 stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash