How to wash rust in the toilet?

Everyone in the house has such a necessary invention as a toilet. Everyone knows what it is for and how to use it, but not everyone knows how to properly care for it. That is why rusty streaks and spots form on it. When this happened, the question immediately arises, how to wash the rust in the toilet? Why did she appear?

to contents ↑

Causes of rust in the toilet

The answer to the question of why rust appears on the toilet is very simple and obvious. If 3 main factors that cause such unpleasant consequences:

1. To transport water, pipes made of non-galvanized steel are massively used. Despite the fact that new highways are often laid of polyethylene, steel pipes will be used for a very long time, and we can’t get away from such a sad fact.
2. Water is a universal solvent. Over time, it carries with it particles of substances from which the pipes are made. Erosion using sand and other materials accelerates the destruction of main pipes.
3. In addition, there are regions whose soil is rich in iron compounds. These substances are saturated and water, which are located on the lower aquifers. Together with water after the disinfection procedure, metallic impurities enter the city water supply. This is complex and leads to the destruction of sewer systems, and for this reason you are regularly puzzled by the question of how to wash rust in the toilet.

In addition to the above scheme, in order for rust to form on the toilet, two more factors are needed:

• Surface contact with running water, which takes a long time. This is possible when the tank of your toilet goes to the duct, that is, water continuously runs through the toilet.
• The surface must have micropores in it, in other words, be rough. Pay attention: the most smooth surface has a toilet made of porcelain. The cost of sanitary ware is slightly lower than the cost of porcelain, but it has a more porous surface structure.

The result of all this - we choose a tool to remove rust from the toilet at home.

to contents ↑

How can rust be prevented?

Of course, with the composition of the water, you can’t do anything, except perhaps only a distiller. But, despite this, to prevent the formation of rust, so as not to look for a means to clean the toilet from rust, you can still. For this:

• Adjust your toilet bowl so that there is no way for water to flow into the duct. In most sets of plumbing fixtures, you can do this by simply bending the float lever to either side. However, in some cases, serious repairs may be necessary, or maybe even replacement of fittings.
• Get special pills for the drain tank. They dissolve over several weeks, also give the water a pleasant smell and color, and prevent the appearance of any unnecessary deposits. They include rust.

to contents ↑

How to get rid of streaks and spots of rust?

Most often it happens that the problem of how to remove rust from the toilet at home is encountered after moving.It would be logical to start life in a new apartment with a repair or with general cleaning, but not everyone has the money to replace old plumbing after moving. That is why you need to think about how to clean old plumbing quickly. Household chemicals can quickly help with this, which you can buy at any store or supermarket.

If the pollution is insignificant and you regularly take care of the toilet, it is quite possible to get by with less aggressive methods - folk. What to give preference in the end, decide on your own. We offer you a complete overview of the various options.

to contents ↑

Household chemicals for rust cleaning

Before rushing to the store for a tool that will help clean the rust in the toilet, you need to know that all such products are divided into several types. Each of them has a different effect on traces of rust.

Abrasive

This type includes funds such as “Comet”, as well as “Pemolux”. In order to eliminate smudges, apply the product on a brush or rag and wipe.

The advantage of using abrasive products is their effectiveness and low cost. But they also have a minus - to remove stains, you need to try hard.

Important! Such substances can scratch the surface of the toilet itself, which of course can lead to the reappearance of rust. Therefore, be careful when cleaning, but carefully.

Alkaline

The well-known “Domestos” belongs to this species. The way to use it is quite simple:

1. Apply a small amount to a contaminated surface.
2. After 15-20 minutes, rinse it off.

Alkalis, which are part of such products, perfectly cope with pollution in the form of rust. However, they are not able to damage the material of the toilet. The advantages of using such a tool include ease of work. Less - if the pollution of the surface of the toilet is very strong, then an alkaline solution will not always be able to remove it.

Acidic

The most popular products in this group are Dressing Duckling and Cillit. Their use will not cause the slightest problems:

1. Apply to a dirty toilet surface.
2. Wait 15-20 minutes.
3. Rinse off.

The clear advantages of the application are their effectiveness in removing rust. The disadvantages include their danger to the skin.

Important! Absolutely all work with such drugs should be performed only with gloves on. If the rusty strip runs exactly in the middle of the toilet, as it often happens, and the tank of your toilet goes at least a little to the duct - block the water while applying the product. Otherwise, from a rusty spot, the entire mass will be washed off a little trickle of water for several seconds.

to contents ↑

Folk remedies for rust in the toilet

It is quite possible to clean the toilet from rust without using household chemicals. If you do not want to spend money on innovative drugs, you need to remember why they are so effective. The correct answer is due to alkali and acid. What can be useful in this case?

The most affordable means:

• Dry oxalic acid can easily remove rusty streaks and stains in minutes. Method of application: pour acid on a damp rag, then wipe the place of pollution. In no case do not forget about gloves, as this tool is very effective, but extremely caustic for the skin.
• Battery electrolyte is also acid and is just as effective. Cleaning is no different from using an acidic innovative product: apply electrolyte to the stain, wait 15-20 minutes and rinse off.
• Acetic essence is also an acid, and concentrated. Exactly what we need. Sachets of citric acid may also come in handy, but they will be somewhat less effective. Their application is no less simple: take any rag, moisten it with vinegar essence, put the rag on the stain for 10-15 minutes, and after the specified time, rinse with clean water.
• The most exotic way to remove rust from the toilet at home is to use toothpaste. Of course, you don’t need to buy toothpaste just for this purpose. Use a tube of one that for some reason did not suit you or did not like to taste. In addition, the amount required for cleaning is small. Squeeze out about 3-4 centimeters of paste on the brush and wipe it with a dirty surface. But to clear a thick layer of rust in this way will not work. If the spots are not very large and young in age, then the toothpaste will cope with them very dignified and simple.
• Well-known drinks such as Pepsi and Coca-Cola, Fanta and Sprite. They brilliantly remove not only rust and limescale, but also urinary stone. And during flushing, also fat deposits on the walls of sewer pipes can easily be eliminated. By the way, the ease with which these drinks dissolve rust and other unpleasant deposits makes you think about the health and safety of your teeth.

to contents ↑

Stock footage

We wish you not to face the problem of a dirty and rusty toilet. And in order not to spend a lot of time trying to liquidate leaks from the walls of your toilet, do not let it form there and turn into a thick layer. Clean your plumbing regularly and it will save you from the appearance of unhygienic and ugly deposits of iron and calcium salts.