How to wash plastic panels





In our time, plastic has gained particular popularity: panels from this material cover walls, ceilings, tiles are used to finish the floor, and PVC windows and doors are an integral attribute of almost every home. Although plastic is unpretentious in maintenance, you still need to know how to wash plastic panels. So that they have a fresh look and delight you with their cleanliness, read the series of recommendations that we offer you in this article.

to contents ↑

What is plastic?

Plastic is a polymeric material that has a long service life, is waterproof, frost-resistant, withstands strong mechanical loads, is resistant to alkalis and acids, is used in residential premises as an environmentally friendly material, and also gives the room a modern look.

Note: Despite the above advantages, plastic is afraid of hot water and aggressive agents with abrasive particles.

to contents ↑

Types of Plastic Panels

Before deciding what and how to wash plastic panels, note to yourself which variety your products belong to. Plastic panels are monophonic and with a pattern that is applied using a special printing method, subsequently a protective layer of varnish is matted or glossy.

Note: It is the varnish that gives wear resistance, reduces the risk of scratches, resistance to ultraviolet and gives an antistatic effect.

There are two types of panels:

1. Laminated - covered with a smooth, shiny film, which gives the surface strength, a beautiful appearance and ease of washing.
2. Unlaminated - have a dull appearance, cleaning is carried out by the dry method using a vacuum cleaner and a damp soft cloth.

Note: The second type of panels is not recommended for installation in the kitchen, since the ingress of greasy, oily and coloring materials can adversely affect the surface of PVC. If the contamination is not promptly removed, it eats into the plastic and leaves a stubborn stain.

to contents ↑

Plastic wash

Before washing plastic, pay attention to some rules:

1. Take care of personal safety equipment - wear a hat, work clothes and rubber gloves to avoid micro-injuries, over-drying of the skin of the hands or allergic reactions to cleaning products.
2. As much as possible free plastic surfaces from foreign objects: paintings, wall sconces, lamps, etc. - this will improve the quality of cleaning.
3. If there are significant seams between the panels into which dirt is packed, walk along them with a rubber spatula.
4. To wash PVC, use only soft sponges without abrasive coating and lint-free rags from a servant, fleece, and flannel.
5. The temperature regime of water should not exceed 40 ° C.
6. Wipe the panels with a damp cloth so that subsequently no dirty streaks form.
7. When choosing products, make sure that they have a liquid or gel-like structure, since powdered products can leave microcracks, which will subsequently get dust and the panel will become unkempt.
8. To avoid unforeseen reactions of the plastic to the detergent, it is recommended to conduct a compatibility test in an inconspicuous place: apply a little agent to the plastic and wait a few minutes, if a bad reaction does not occur, proceed with the cleaning process.
9. To avoid damage to the appearance of PVC and allergic reactions, after processing plastic panels of various kinds with means, be sure to rinse all the chemistry with water.
10. To make the glossy panels shine, wipe them dry and treat them with a special polish for plastic.

to contents ↑

How to wash plastic panels?

Means for washing plastic are not limited to factory preparations, they can be prepared at home from improvised means, which significantly saves your time and budget, and also makes it easy to solve the problem of washing plastic panels. We offer you a list of tools and methods for cleaning such material with minimal cost.

Soap solution

1. Take detergent for dishes or laundry soap 30-40g.
2. Grate and dilute with warm water.
3. Stir until smooth.
4. Dampen a soft cloth in the solution and wipe the panels.

Note: It is not recommended to use bath cleaners and detergents for soap solutions..

Soda

All kitchen surfaces are subject to contamination from food, so the question of how to wash plastic panels is very relevant here. If multi-colored spots form on the surface:

1. Make a liquid paste of water and soda.
2. Apply the mixture to the contaminated area.
3. Leave for a couple of hours.
4. Rub with a soft sponge, moistened with pre-warm water.
5. Remove any remaining dirt and cleaning agent.

Note: To avoid minor scratches, do not rub the soda solution.

Table vinegar or vodka

Such funds are almost always at hand. Therefore, please note that they will perfectly wash dried traces of grease from plastic facades.

Note: Use carefully on brightly colored panels.

Chlorine Bleach

Used in case of yellowing of plastic:

1. Dilute in 10 liters of cool water 2-3 tbsp. bleach.
2. Wet a soft cloth brush in the solution.
3. Rinse the yellowness with movements in one direction.

Ammonia

The aqueous solution of ammonia is well washed in frames, window sills and glass from greasy plaque in a proportion of 1 tbsp. per 1 liter of water. To solve the "fat problem", you can also use a special tool containing ammonia.

Melamine sponge

Universal cleaner. Removes dirt, limescale, soap stains, erases traces of markers, ink, children's drawings. Suitable for cleaning all hard surfaces. The principle of its application is as simple as possible - moisten a sponge with water and wipe the problem areas.

Note: Before using melamine sponge on varnished surfaces, test its effects in an inconspicuous place. If you use a sponge as an eraser (dry) so that it does not crumble or tear, work with a corner or a small part of it.

to contents ↑

Professional household chemicals

If you are more impressed with the use of special household chemicals, rather than folk remedies, select one of the options below. You will definitely appreciate how easily problems are solved, how to wash plastic panels in the future and how to properly wash plastic.

Special liquid and aerosol universal products

Carefully read the rules for using this product and dilute the concentrate in accordance with the instructions. Regarding the brand - give preference to trusted manufacturers, reviews of which are exclusively positive:

1. Multifunctional cleaner L.O.C. from Amway brand. Means for cleaning all surfaces. It is safe and environmentally friendly, does not require rinsing with water. Dilute 30 ml of the product in 5 l of water, wash the panels and dry as usual.
2. Universal remedy Mr.Proper and Mr. Muscle. Detergent for walls and floors. The tool can be of different colors, but this in no way affects the white panels. It foams a lot, practically does not leave streaks, has a pleasant smell, which quickly disappears. Some concentrates when diluted with water after use do not even need to be washed off, which gives additional convenience and reduces the entire cleaning process.
3. Cream cleaning Cif Cream. It contains microgranules surrounded by air bubbles that delicately clean fragile surfaces without leaving traces or streaks.Easily copes with persistent kitchen dirt, rust and limescale.
4. Glorix spray. It perfectly cleans and disinfects the room, fights against mold. Spray the product over the surface, leave for 10-15 minutes, rinse with a damp cloth.

to contents ↑

How to wash plastic panels on the ceiling?

The ceiling in the house is one of the main elements of the interior, so it should look clean and well-groomed. On the ceiling, as on all surfaces, dirt, dust, cobwebs form over time, and spots can also appear due to leakage of the roof, mold growth, sediment from tobacco smoke, traces of flies.

When washing plastic panels, use the means described above and the following recommendations:

1. To clean the ceiling in a normal room, use a vacuum cleaner and a damp cloth.
2. Wash the kitchen panels on the ceiling with warm soapy water using a pork bristle brush.
3. For the convenience of washing plastic on the ceiling, use a special mop with soft removable rags. Wash the rag as it becomes dirty, change the water more often.
4. To prevent stains from forming on the ceiling, use alcohol-based products.

to contents ↑

Stock footage

Now you know how to wash plastic panels. Use our advice in everyday life and your home will delight in cleanliness and comfort.