Replacing the heater in the washing machine

The design of each modern washing machine involves the presence of a heating element, which is responsible for heating the water and maintaining its certain temperature during the washing process. Therefore, if your household appliance has stopped heating water, most likely you will need to replace the heating element. In this article we will tell you how to replace the heater in the washing machine and what factors can lead to its breakdown.

to contents ↑

Symptoms of a heater failure

If the washing machine has stopped heating the collected water, this is not a reason for stopping the operation of the appliance. In this regard, users quite often cannot immediately diagnose a malfunction.

The following signs often indicate the need to replace the heating element in the washing machine:

• The laundry has an unpleasant smell after washing.
• During the operation of the washer, the hatch glass remains cold.
• Stains and dirt remain on washed laundry.

Important! Problems with heating the water in your washer indicate a malfunction in the heater; however, the reasons for its breakdown may vary.

There can be a lot of reasons for the breakdown of the heating element of the washing machine, the most popular of them are the following:

1. Closing the heater. In this case, the washing machine almost immediately ceases to function, since there is an increased risk of burnout of other parts of the device.
2. Malfunction of an electric chain in which the heater enters. When the circuit breaks, the washing machine usually continues to function, however, the process of its operation becomes longer.
3. Damage to the pressure switch. Perhaps the heating of the water in the washing machine does not occur due to a malfunction or contamination of the level control sensors.

Important! During the washing process, people often do not pay much attention to the fact that the appliance did not finish the wash cycle in accordance with the set time. Often, the equipment does not perform a number of functions, not because of a software malfunction, but giving a signal about the presence of malfunctions that require urgent removal.

to contents ↑

Where to begin?

Before changing the heater in the washing machine, it is necessary to determine its location. In the modern market of household appliances, a wide variety of washing machines from various manufacturing companies is presented. Naturally, they have some design features.

Important! Often the heater is located at the bottom of the tank.

Regardless of the brand of the washing machine and its design features, observe the following rules:

1. Before starting the repair, be sure to unplug the washing machine, unplug the plug.
2. Completely remove water from the tank. To achieve the highest quality result of this procedure, use a drain filter or hose.

Important! Keep in mind that a small amount of moisture may remain in the system, so be prepared to use a mop, rag, and basin.

To remove the spent heating element and install a new heating element, you may need the following tools:

• flat and Phillips screwdrivers;
• open end wrench or socket wrench.

Important! To avoid malfunctions, or at least for a long time to delay them, you can correct care.On our site you can read a separate article in which you will learn how to conduct washing machine prevention.

to contents ↑

How to change the heater in the washing machine Samsung?

Failure of the heating element is the most popular malfunction for most washing machines. The heater for the Samsung washing machine often has to be changed due to the chemical composition of the water from the central water supply and its level of hardness. Let us consider this process in more detail using the Samsung devices as an example.

Replacement of the heater in the Samsung washing machine can be performed independently. To achieve the desired result, follow these tips and tricks:

1. Disconnect the washing machine from all connected utilities - water, electricity and sewage.
2. The heating element of the washing machine from this manufacturer is located under the tank plane, behind the front panel.
3. Having found the necessary assembly, disconnect the power wires and temperature sensor from the heater.
4. Unscrew the connection of the heating element using the appropriate key for this purpose.
5. Carefully remove the heater from the washing machine.
6. Clean the component location from debris and foreign matter.
7. Install a new heating element.
8. Assemble the washing machine following the reverse procedure.

Important! Use exclusively original parts designed by the manufacturer for servicing Samsung washing machines. You can purchase a suitable heater in a service center or a store of branded spare parts.

to contents ↑

How to replace the heater in an Indesit washing machine?

Indesit is a well-known manufacturer of household appliances and washing machines from Italy. The products of this brand are characterized by a high level of reliability and quality, and therefore are very popular among the hostesses of various countries.

However, even reliable and modern equipment is not immune from a malfunction of the heating element, which is its main component. Most often it is caused by the formation of scale on it. And this is better to warn than to fight. Learn How To soften hard water.

Important! You can determine the malfunction of this part by mistake F08, which will appear on the information display a few minutes after the start of washing.

To replace a heater in an Indesit washing machine, follow these instructions:

1. A design feature of the washing machines from the Indesit manufacturing company is the location of the heating element at the rear of the structure. Therefore, before replacing the heater in the Indesit washing machine, you need to turn the device to get the most comfortable access to the necessary part.
2. Disconnect the washing machine from all communications - sewage, water and electricity.
3. Remove the back cover of the appliance by unscrewing several fasteners with a screwdriver.
4. Locate and remove the drive belt.
5. From the heater located in the lower left part of the design, disconnect all wires and sensors.
6. Turn off fixing bolts, accurately dismantle a heating element.
7. Clean the tank and installation surface from debris, rust and scale.
8. Install a new heater and assemble the machine, following the reverse procedure.
9. Check the operation of the washing machine.

Important! After installing a new heater, the performance of the device can be checked due to the self-diagnosis system built into modern models of washing machines.

To prevent power surges from causing damage to the machine, use special fuses. Our rating will help you choose best line filter model.

to contents ↑

Stock footage

In this article, we talked about how an independent replacement of a heating element in a washing machine is performed.We hope that from now on your washing machine will be pleased with its excellent performance and will not cause unnecessary trouble.