Replacing the bearing on the Indesit washing machine

In the modern world of advanced technologies, a washing machine is available in almost every home. However, any technique tends to wear out and break, and therefore, each user sooner or later thinks about changing the bearings that underlie the mechanism. This procedure is quite complicated and responsible, and therefore its improper implementation can lead to the final breakdown of a household appliance. In this article we will tell you how the bearing is replaced on the Indesit washing machine, what are the features of such work.

to contents ↑

When is bearings needed in an Indesit washing machine?

Before proceeding with the repair of a household appliance, it is necessary to determine whether the problem is really in the bearings? For diagnostics without disassembling the case, use the following recommendations:

1. Achieve the rotation of the drum of the Indesit washing machine at the highest possible power. To achieve this goal, set the most intense spin cycle of the laundry and listen to the sounds made by the appliance. If the problem really is the integrity of the bearings, then the part will certainly give itself away.
2. To make sure that the bearing does make a strange sound, unplug the appliance from the mains. After removing the laundry by hand, spin the drum in different directions. If you hear a rattle of metal and a knock, then it is the bearing that failed.
3. Check if moisture accumulates under the bottom of your appliance. If a small puddle is regularly formed there, then the problem lies in the movable element of the drum of the washing machine.

Replace the bearing on the Indesit washing machine with the strength of almost every person who is at least a little versed in technology.

Important! If you have doubts and it is possible that the problem is more serious, it makes sense to calculate the probable cost of the repair, how profitable it will be. Sometimes it’s easier to replace the machine than to spend time and money on its restoration. In this case, our reviews will come in handy:

• Where to put the old washing machine?
• Rating of washing machines in quality and reliability.

However, before proceeding with the repair, it is necessary to prepare all the tools that may be useful to you in such a difficult task.

to contents ↑

What might be needed?

If you need to replace accessories for a household appliance, first of all, visit a company store or service center and purchase an original set of oil seals and bearings from Indesit.

Important! When you buy an original set of parts, you can be sure that they will fit your model of household equipment. It should also be borne in mind that the bearings and oil seal are a single system of the mounting unit, and therefore their replacement should be carried out comprehensively.

To replace the drum bearing of an Indesit washing machine, in addition to new components, the following tool kit should also be prepared:

• hammer;
• Phillips screwdrivers with long and short stems;
• spanners and heads;
• pliers;
• grease for bearings;
• Allen key
• wooden block.

Important! Before proceeding with the repair of the washer, prepare an appropriate place. It is important that you have enough space not only for free movement, but also to accommodate all the components of the disassembled unit.

to contents ↑

Do-it-yourself Indesit washing machine bearing replacement

At the initial stage of repair, you have to carefully remove the back and front walls of the household appliance.

Important! When performing this task, it is important not to damage the rubber bands installed on them.

Dismantling the back wall

Disassembly work should begin by removing the top cover of the washing machine. To perform this task, it is enough to unscrew a few fixing bolts with a screwdriver. After carrying out these actions, the back wall of the household appliance is removed quite easily and quickly.

Dismantling the front wall

To properly and safely remove the front wall, follow these guidelines:

1. Remove the powder and gel containers. To do this, pull the cuvette towards you until it reaches the stop, and slightly lifting it up, remove it.
2. Find and unscrew the fasteners that secure the front panel.
3. Remove all screws that hold the front wall of the Indesit washing machine.
4. Remove the rubber cuff and remove the sunroof blocking element.
5. Disconnect the front wall of the household equipment.

Important! By disassembling the housing of the washing machine, you get access to its insides. Inspect the heater carefully - in what condition is it, is there scale? If such a phenomenon is present, after completing the repair, be sure to use our instructions to descale in the washing machine. 

Drum Extraction:

1. To continue the subsequent work freely, remove the belts from the drive of the washing machine and drum pulley.
2. Ensure that the pulley is firmly fixed in a stationary position by inserting a pre-prepared wooden block into it.
3. Having unscrewed the main fasteners, gently pull off the part and remove the spacer bar.
4. Having disconnected all the wires from the electrical parts, proceed to unscrew the fasteners of the movable assembly, which is responsible for the fastening and normal functioning of the drum.

Important! Quite often, the screws in this part of the device are covered with rust and “stick” to the metal. This can be explained by the intense effect of moisture on structural elements. For easy and convenient removal of fasteners, pre-spray them with WD-40.

Dismantling the drum and replacing bearings

This repair phase is the most critical and should be performed according to the following algorithm:

1. Remove the clamps holding the tank cap.
2. Carefully remove the gaskets and directly the tank cover of the Indesit washing machine.
3. Pull the drum with a movable unit, which is based on the bearing from the tank.
4. We knock out worn out bearings on our own or we ask the specialists of the nearest car service for help.

Important! Self-knocking out is quite risky and requires special tools, but car service masters will perform this work quickly, efficiently, safely and inexpensively.

5. We install a new oil seal and drum bearing of the Indesit washing machine.
6. We carry out the assembly of the household appliance, observing the reverse procedure.

Important! Remember a few simple rules that are important to implement, but very important for a long-term technique:

• Install quality surge protectors to protect against power surges.
• Perform regularly washing machine prevention.
• Pay attention to the wiring status if knocks out plugs when turning on the SMA.
• Make sure that mold and fungi do not appear on the rubber band of the hatch. If this happens, use our instructions to replace cuff.

to contents ↑

Stock footage

In this article, we shared with you recommendations and detailed instructions on how to replace the bearing in the Indesit washing machine with our own hands. We sincerely hope that in the future household appliances will please you with good work for a long time.