The dish does not spin in the microwave - what should I do?

Those who started using the microwave oven, over time, can no longer imagine daily life without this technique. In a matter of seconds, it will help to unfreeze meat and fish, warm up the finished dish, and even in a couple of minutes will make it possible to make a culinary masterpiece for dinner without much hassle. But as with any electrical appliance, over time in the microwave oven there may be malfunctions or incorrect operation. If the dish does not spin in the microwave, not everyone knows what to do. And this is a fundamentally important point in the operation of a microwave device.

to contents ↑

Why do we need rotation?

The very first models of microwave ovens did not have the function of rotating the pan, so in order to achieve a high-quality heating result, we had to cope manually and spend extra time on this. That is, it was necessary to turn on the device at least 2 times, when repeating, turn the plate with food on the other side.

Somewhat later, this moment was improved by manufacturers and brought to automatic mode. For this, now every microwave oven is equipped with a special plate on wheels. Due to the circular movement of the pallet, the products delivered inside are uniformly heated for 1 cycle.

There are 2 ways to do it if the dish does not spin in the microwave:

• leave everything as it is and manually rotate plates with food as needed;
• find the reasons why the dish does not spin in the microwave, and correct them in order to restore such convenient automatic operation of household appliances.

to contents ↑

Common reasons

Before contacting a service center or private repair technicians, inspect your equipment. It is likely that the reasons why the dish does not spin in the microwave will be very simple and do not have the need for technical intervention.

So, what to look for in order to restore the correct operation of the microwave:

1. The plate placed inside has too large a diameter, due to which the possibility of its rotation is blocked by the walls.
2. A piece of food has fallen from the plate and blocks the movement of the pallet or the container with food on it, perhaps a small crumb has clogged between the wheels and interferes with its rotation. Or, for example, you put too large a piece of meat for defrosting, which when turning rests against the walls and prevents the movement of the pallet.
3. After cleaning, the pan was not installed correctly - the grooves did not fit into the mating ridges on the sleeve or the sleeve itself was not as it should. To remedy the situation, just correct the details.

Important! If you use this technique very often, there is probably not always time to clean it, and as you operate, a layer of fat from food accumulates inside and the smells mix. With the help of our practical tips gathered from experienced housewives, you can literally 5 minutes wash the microwave inside of grease.

to contents ↑

Technical reasons

But if you have not identified all the previous reasons, and the dish does not spin in the microwave - what should I do? - Do a thorough repair or call the master.

The reasons for this phenomenon can be as follows.

Gear breakage

The gear wheel of the gearbox may fail and result in the lack of rotation of the pan. To restore microwave functionality, replace the gear. If this does not help, you will have to completely change the engine, but such a procedure is usually expensive, so it is sometimes more advisable to return the old device for disposal and purchase a new one. If you have just such a situation, our model will help you deal with current models today. rating of the best microwave.

Coupling

Another reason why the dish does not spin in the microwave is the slip of the coupling on the motor shaft. To prevent this from happening, you can try to strengthen it. If such actions do not help, the clutch changes to a new one.

Motor winding breakage

In this case, you will have to call the master, since it is impossible to restore the integrity of the motor winding - it only needs to be changed. But if you decide to come up more thoroughly and replace the entire motor - this is quite possible if you have some skills in working with electrical appliances.

You can determine this failure even without disassembling the equipment - by the presence of the smell of burned varnish.

Open circuit

If the winding is not broken, but the contacts in the power circuit are simply broken. To identify this malfunction, you need to ring the wiring tester. When you find a cliff - restore its integrity.

Important! Once you restore your appliance, try our simple and tasty microwave recipes.

to contents ↑

Stock footage

From this article, you learned about all the possible reasons why the dish does not spin in the microwave, and what you can do about it. We hope you did not find any complex malfunctions, and the phenomenon was covered only in the banal reasons for the incorrect operation of the device. Henceforth, try to more carefully handle your valuable equipment so as not to waste time searching for possible breakdowns.