Installing a washing machine in the kitchen

Unfortunately, modern bathrooms are not too spacious, so installing a washing machine in the kitchen is quite common. If you do not have experience in performing such work, it is better not to risk it and consult a specialist. By this you insure the neighbors below from the flood, and yourself - from the troubles associated with this. But if you feel that you can handle this job successfully, do not waste time, go ahead!

to contents ↑

Advantages and disadvantages

There are a lot of arguments for installing a washing machine in the kitchen. The advantages of such accommodation include:

• Proximity to water supply and drain pipes.
• The washing machine fits perfectly into kitchen sets of various designs.
• Restricting children's access to the device. Reduces the likelihood of a malfunction in the device from childish pranks.
• Saving useful space in the bathroom.
• The ability to "parallelize" the implementation of various household chores.
• Less humidity than in the bathroom. This reduces the risk of metal corrosion.
• The ability to purchase a full-sized powerful unit. Even a small kitchen room allows you to do this.

Important! There is a drawback, and a significant one. Food and detergents are incompatible. You can solve this problem by using gel orliquid detergentsFortunately, the choice in the stores is very extensive.

to contents ↑

Size selection

The choice of a specific model of a washing machine depends largely on the characteristics of the room. Possible options are:

1. The unit with a horizontal drum. Front-loading CM convenient for installation under the countertop or in a specially equipped niche.
2. Vertical loading. For the kitchen, this is the least convenient option, because in order to access the work hatch, you need to raise the upper plane.
3. Embedded Models. As a rule, these are compact devices that allow you to successfully combine washing and cooking. Individual models can be built in not only in furniture, but also under the sink. Such a solution for a small kitchen is the best.
4. Full size car. She successfully fits into the design of a large kitchen. Such machines, due to the significant footprint, are the most stable.

Important! So that your household appliance is always clean inside, and harmful microorganisms do not start, find out how it is made cleaning the washing machine Domestos. 

to contents ↑

Accommodation options

If the place for placing the washing machine in the kitchen is chosen correctly, then the design of the room will not lose from this, but only benefit. Decide whether to place the device in a closed cabinet or leave it open.

Important! The latter option is preferable if the unit is combined in color with the tint range of the room - stove, furniture, decoration materials.

The following types of layout are possible:

• Directly near the sink. The advantage of this option is that the sewer and water supply are nearby. Great if a power outlet is nearby.

Important! The space under the sink can be used to store detergents, which can also be used to produceautomatic washing machine. 

• Place under the sink. This option is for small kitchens, where you have to literally fight for every centimeter of space.
• Free corner in the kitchen. Here you can place the unit with a vertical load of linen. You can put the equipment in the kitchen cabinet.

Important! The disadvantage is that you will need additional pipes to connect.

• Placement under the countertop headset. It is advisable to order the width of the module so that there is enough space for the placement of detergents. It turns out a beautiful and compact single line of furniture and kitchen appliances.

to contents ↑

Installation Features

Installing a washer is a responsible matter, but if it comes to placing it under the countertop in the kitchen, you need to be doubly careful, observing safety rules and connection technology.

Have you purchased a brand new washer and delivered it to you from the store? Unpack the machine, remove the transport parts (bolts, staples) from the surface.

There must be a guarantee document and instructions for assembling the device.

Important! Be careful. A forgotten mounting bolt or bracket may cause the unit to malfunction.

Connecting a washing machine in the kitchen or in the hallway is quite feasible. But you need to observe a number of requirements and conditions:

• A solid and level base under the unit. For apartment buildings, the ideal option for the floor under the washing machine is reinforced concrete. If you take care of the flat floors before installing the washing machine in the kitchen, you will greatly facilitate your work.
• If it is not possible to level the floor, adjust the height differences due to the legs of the unit. In almost every model, the legs are adjustable.
• Think in advance where exactly to place the washer. Try to place the machine closer to the outlet to use a direct connection without the use of additional devices.

Important! If the standard cord is not enough to connect, contact a service center. The wizard will quickly and efficiently replace a conventional cord with an extended one.

• It is advisable to provide a separate outlet for the washing machine, which is directly connected to the distribution panel.

So, the floors are aligned (as an option, the adjustment is done with the help of the legs), the unit is installed. Now grab the appliance cover and try to swing it. If everything is done correctly, your attempt will not succeed. Now try to swing the washer in a diagonal direction - the amplitude of the oscillations in different directions should be equal. The installation issue can be considered resolved.

to contents ↑

How to connect the washing machine in the kitchen to power?

Connecting to power is the most difficult and crucial moment. As already mentioned, it is desirable to allocate a separate outlet for the washing machine. Automatic devices are equipped with grounding on a euro plug. Therefore, to power the washing machine, you need to use the so-called Euro sockets.

The use of extension cords and tees significantly reduces the protection of both the socket and the unit itself. The risk of fire increases significantly.

Important! When purchasing a power outlet, pay attention to workmanship. The best are sockets with ceramic "filling".

to contents ↑

Connection to the water supply system

According to the standard adopted in Europe, it is necessary that a separate valve for supplying cold water is located above the unit. The valve also serves to stop water from entering the washer when not in use.

Important! This is a necessary precaution so that the pressure of the water does not knock out the tank and a real flood occurs. It is best to choose a ball valve manufactured in Spain.

The connection procedure is as follows:

1. Unscrew the hose that connects the pipe and mixer.
2. Fasten the tee to the vacant place, not forgetting about winding the connection with tow or FUM tape.
3. Screw the water supply hose to the mixer into the upper branch of the tee. In the side outlet, install a tap that restricts the water supply to the washer.
4. Connect the water intake hose from the unit to the tap. Connection completed.

This is a simple and reliable way to connect the washing machine to a cold water supply.

Important! Do I need to connect the washer to hot water? In principle, this is not forbidden. When mixing hot and cold water, a jet with a temperature of about 40 degrees is obtained. However, connecting only to a source of cold water is enough. The washing machine is equipped with heating elements that heat water to the required temperature. Moreover, if you try to connect, you may have difficulty washing delicate items of clothing.

to contents ↑

Stock footage

As you can see, there is no particular difficulty. Only attentiveness, patience and utmost accuracy!