Installation of a gas column

The most common, inexpensive and reliable way to solve problems associated with heating water is the installation of a gas column in an apartment or private house. Only this device is capable of generating such large amounts of hot water in such large quantities that is cheap, which is why most water heaters in modern homes are gas. In this article we will examine in detail how the gas column is installed, find out what documents are needed for this, and how this unit generally works.

to contents ↑

Basic requirements for the installation of gas columns

This type of water heater requires compliance with all applicable safety standards and rules, as well as extremely accurate and careful handling. There are a number of special requirements and documents that govern the installation or replacement of geysers in an apartment or private house.

There is an instruction that clearly regulates each stage of such work, in order to ensure the safe operation of gas flow heaters. After the installation and commissioning of this device, consumers must follow the rules for using speakers in order to avoid various kinds of consequences.

Before you learn how to install a geyser in an apartment, you need to familiarize yourself with the basic requirements for this process. A number of requirements for the location and installation of a gas appliance are as follows:

1. Such devices must not be installed in hostels, bathrooms, shared corridors, as well as rooms without windows.
2. Do not mount the heater directly above the gas stove.
3. Units operating on gas must not be installed in rooms the area of ​​which does not exceed 7.5 square meters and the ceiling height is less than 2 meters.
4. You can not install speakers in the premises of the basement and basement type.

to contents ↑

Rules for installing gas columns

Being interested in how to install a geyser in a private house or apartment, it is necessary to start all with preliminary preparation. First you need to take such actions:

1. In your house or apartment, choose a suitable place for the installation of the column.
2. Choose the model of device that will be installed in your home. In this case, it is necessary to correctly calculate its capacity, in particular, this applies to situations when it is planned to route the water supply to two points.
3. Check the condition of the chimney, and if everything is in order, then draw up an act confirming its performance.
4. To develop a project for installing a gas water heater. When compiling this document, the layout of the apartment, the presence of existing chimneys or places for their installation, as well as the supply of a water supply and gas pipeline must be taken into account.
5. The project should include schemes for the necessary water and gas connections, as well as the output of the combustion products, the wiring of water heating in the presence of several points.
6. It is necessary to coordinate the project in the appropriate authority.
7. Then you should get permission to install the column.

Only after preparing all of the above documents can you start installing a gas column. For accounting of the consumed gas do not forget install gas meter.

to contents ↑

Installation and start-up of a gas water heater

The process of installing a gas column is divided into several main stages:

• Shut off the gas supply to the room where it will be installed by means of an appropriate tap.
• Overlapping the water supply of a house or apartment.
• Marking on the wall where the device will be attached.
• Installation of brackets for mounting a gas heater with an electric drill and dowels.

Important! Not sure where to place the column in a small kitchen? Our separate review will help you in this task. Follow the link "Kitchen Design in Khrushchev with a gas column".

The rules for installing a geyser in an apartment must be followed, and everything must be done consistently and accurately. A column connection is as follows:

• The device is hung on the wall using brackets. By the way, the installation instructions always come with the device, which is purchased at the store.
• Then, the tee is inserted into the gas supply pipe and the connection is made directly to the gas main column. It should be noted that the eyeliner must be equipped with a special tap. Each connection must be equipped with gaskets.
• At this stage, the water supply is connected. It is necessary to check that all connections are tight in order to avoid future water leakage.
• The hole intended for the output of combustion products from the heater must be connected to the entrance to the chimney. A specialized corrugated hose is used for this, which must be selected in accordance with the required connecting diameters. The place of connection to the chimney must be framed with a special outlet.
• The water tap opens, water is supplied, all connections are checked for leaks. If it is found, then immediately shut off the water and eliminate the cause of the leak, then again supply water for the test.
• Places of all gas connections are smeared with soapy water, and only then does the gas supply valve open. Be careful, because if a leak occurs, the solution will begin to bubble. In this case, it will be necessary to shut off the tap as soon as possible, tighten all connections. But the main thing here is to know the measure - you can’t but tighten too much so that the connections are not damaged.
• Only by making sure that all connections are tight can you begin to check traction. It is necessary to bring a match to the chimney: if the flame deviates in its direction, this will mean that the draft is normal.
• At the last stage, the column is turned on and the heating of the water is checked. If everything goes as expected, then you can begin to use the device calmly, observing the rules of safe operation.

Important! Careful attitude to the device and timely cleaning will help extend the life of the equipment. Find out, "How to clean the gas column".

to contents ↑

Stock footage

Replacement and installation of gas water heaters are very responsible tasks that require strict adherence to all requirements and norms regarding their connection and installation. Of course, you can perform such work yourself, but you need to have a certain amount of knowledge and be self-confident in one hundred percent. Having even the slightest doubt, it is better to seek the help of qualified specialists in order to protect yourself and your family members from unpleasant consequences.