The washing machine does not drain and buzzes

Modern housewives cannot imagine their home kingdom without a washing machine. But, like any other household appliances, an indispensable assistant can break down. Do not be upset about this, since today home repair services are quite available, and some breakdowns and malfunctions, for example, when the washing machine does not drain and buzz, can be eliminated on your own. In this article we will analyze all the possible reasons why the washing machine is buzzing, does not drain the water and tell you what your actions should be.

to contents ↑

What symptoms should bother you?

Water from the washing machine should be removed automatically, several times in one wash cycle. First, the initial and main wash occurs, then rinsing and final removal of the liquid during the spin cycle. The following symptoms can prevent a malfunction:

1. The water began to drain too slowly, and the subsequent washing mode starts to malfunction.
2. Water is drained periodically, that is, not every wash.
3. During washing, the water drains, but at the rinse stage - no.
4. The washing machine buzzes and does not drain the water at all.
5. The laundry spin mode is locked.

to contents ↑

Unit Causes

Any of the above malfunctions requires you to first determine the cause of the breakdown. Sometimes it’s enough to simply read the instructions, as each operation manual clearly indicates visible malfunctions, in which the washing machine will pump out water slowly or not at all. Sometimes such malfunctions in the operation of the unit can be easily fixed independently. Consider the main reasons why the washing machine buzzes, does not drain the water.

Wrong wash program

During the operation of the machine, be sure to double-check the selected washing mode, as on some machines the “no drain” mode is built-in. Purely by chance, you could deliver this particular program, and if there are children in the house, it is possible that the fidgets could take advantage of your absence and press a button on the control panel. In this case, it is easy to fix the malfunction, just put the correct program and the problem that the washing machine does not drain the water and the buzz will be solved immediately.

Important! The individual review information on our helpful tips portal helps you figure out what do the typewriters mean.

Drain hose malfunction

The washing machine cannot do the job fully for a trivial reason drain hose clogging or its inflection. Examine the drain hose thoroughly and at the same time clean it for prevention. In case of discharge through a siphon, be sure to check it for clogging.

As soon as the position of the hose is corrected and the dirt is removed, the flow of waste water will be ensured. As a result, you will no longer be bothered by the fact that the washing machine does not drain and buzz.

Filter clogged

Causes of clogging can be small and larger parts (objects), for example, bones from a bra, pins, coins, buttons, paper, etc. The filter must be cleaned periodically, since its clogging can cause not only insufficient drainage of water, but also many other malfunctions.Follow the link and find tips on how to clean the drain filter in a washing machine.

Important! The instructions for the washing machine indicate the frequency of cleaning the filter. Follow the operating rules so that there are no unnecessary problems, in particular, such as a washing machine that does not drain and buzzes, the drum does not spin, and the equipment does not turn on at all.

Clogged pipe inside the machine

Sometimes in the nozzle that goes from the tank to the pump, you can find small details of clothing, such as socks, handkerchiefs or other small things. As a result, the washing machine will not drain the water. Remove the blockage and the machine will work as before.

Pump malfunction

External symptoms of a malfunction of the drain pump (pump) may be the muffled sound of the pump during the process of draining the water. That is, instead of just draining the water, the car is noisy and buzzing. In this case, only a professional specialist can unambiguously determine the malfunction.

The cause of the malfunction of the drain pump can be natural wear (average life - 3-5 years). Another option is that the pump impeller could be blocked by a small part that leaked through the filter. It is impossible to do without a complete disassembly of the pump, because both threads and hair could be wound on it.

A signal for replacing the pump can be periodic malfunctions of the pump, for example, in the case when the washing machine regularly, with a certain frequency, does not drain the water and does not squeeze the laundry.

Important! If the washing machine does not drain the water and at the same time is noisy and buzzing, then immediately consult a specialist, as it is most likely necessary drain pump replacement.

The integrity of the wiring inside the machine is broken

An experienced specialist will identify wiring problems without any particular problems. It is strongly discouraged to try to fix such a problem on your own without having special skills, knowledge and experience.

Control Module Failure

A failure in the firmware or a burned-out microcircuit leads to the fact that control module (programmer) does not send a signal to drain the water and spin. With this malfunction, a flashing or replacement of the module with a new one is necessary.

Important! Sometimes the washing machine refuses to drain the water due to elemental overload. Observe the laundry weight indicated in the instructions, then the drum will work without problems.

to contents ↑

What to do if the machine does not drain the water?

If you find a malfunction, proceed as follows:

1. Unplug the washing machine.
2. Install a low-sided water tank under the loading door.
3. Unscrew the pump filter and clean it if necessary.

Important! The filter cleaning procedure is described in the washing machine instruction manual.

4. If even after removing the filter there was no drainage of water, it is necessary to remove the drain pipe, according to the following scheme:
   • Unscrew the screw fasteners of the drain assembly.
   • Take it off.
   • Loosen and remove the pipe clamp to the snail.
   • Direct the end of the nozzle into the tank for draining water.
   • Carefully inspect the corrugation and examine it for blockages.
   • Collect all the elements and return the machine to its original position.
5. Behind the filter is the impeller of the pump. Check the rotation of the impeller axis for blockages. For example, threads could be wound on it.
6. After you remove the filter, turn on the spin mode and use the flashlight to inspect the filter hole. If the impeller is clean but does not rotate, then a replacement pump is needed.

Important! After inspection and repair, be sure to visually check all connections and fixtures, as well as the electrical wires supplying current to the pump. Start the machine in operation, choosing any washing program so that the water is filled, then stop and switch to drain or spin. If everything is correct, then unplug the machine from the network and check for leaks, and then use the household assistant as a pleasure.

to contents ↑

Prevention Tips

To avoid problems, in particular, such as a malfunction with water draining, adhere to the following measures for the prevention of unit breakdowns:

• Be sure to carefully wash all pockets for foreign objects before washing.
• Do not overload the machine tank with laundry. Strictly observe the load weight indicated in the instructions.
• When washing, use high-quality powder in the right amount.
• Clean the pump filter periodically.
• Use a power filter during washing to protect household appliances from power surges and power outages.

to contents ↑

Stock footage

We hope that you have identified the cause of the breakdown and found out why the washing machine does not wash water, buzzing. If it’s difficult for you to fix the breakdown on your own, we recommend that you contact a service center where the cause of the malfunction will be installed quickly, accurately, and the repair work will be carried out efficiently and with a guarantee.