Error on Samsung 5d washing machine

Samsung manufacturers of state-of-the-art household appliances have equipped the central display control panel with an oversight button. This function allows you to individually detect, and in some cases, on your own to eliminate the created problem. In this article, we will try to figure out what to do if an error occurs on the Samsung 5D washing machine, find solutions to the problem.

to contents ↑

Error “Sud” (Sd, 5D) on the washing machine display - code value

In modern Samsung brand models, the process of foam formation is controlled. If there is an increased abundance of detergent in a rotating drum or in a container for washing powder, the function of stopping the formation of foam is activated. The highlighted error code “SUD” (SD, 5D) on the central control panel indicates a non-decreasing amount of foam substance. In this situation, washing household appliances stops their software process and starts a waiting mode. This can happen due to improper operation of the equipment.

Important! In this case, no hasty actions need to be taken, since a code error brings to the attention of only information, and after a while, the selected program starts again and the washing process continues.

to contents ↑

Causes of SUD / SD Error

There are several reasons for the error on the Samsung 5d / SUD / SD washing machine. The most common include:

• Use of the wrong powder. If, for lack of special detergent, you decide to use what is at hand when the urgent need for washing, this is most likely the problem. Read all in detail aboutwhy you can’t wash with handwash powder.
• The use of highly concentrated detergents, which is completely unsuitable for Samsung washing machines.
• Too much use of detergent. For example, the program washing of wool products requires much less use of detergent.

Important! It is imperative to follow the instructions for use of the detergent that are described on the packaging, otherwise too much can lead to damage to the washing machine. Typically, 2 tablespoons of detergent is used on 6 kg of dry laundry.

• The use of low-quality and fake detergents, which very quickly render the washing machine unusable.

Important! If you do not want to spoil the washing machine, then it is always best to purchase only proven detergents that are from a well-known manufacturer. It is worth the fear of cheap and obscure brands.

To select really high-quality, use the information from the following articles:

1. Which is better - powder or washing gel?
2. Best Laundry Products.

to contents ↑

Other 5D Error Issues

In addition, there are other problematic issues. The main causes of this error on the Samsung 5D washing machine can be:

• Pollution of the filter - also leads to excessive formation of foamy substance. Clearing the water pouring cord instantly solves this problem.Quickly solve this problem, if you have never encountered it before, instructions from the article will help. “How to clean the drain hose of a washing machine?”.
• Foam sensor breakdown, which is worth checking for performance and replaced if necessary.

Important! For household appliances you need a high-quality detergent. An unsuitable detergent for washing and washing is preferably replaced.

to contents ↑

What to do?

Sometimes a moment occurs when the washing process does not end, the foamy substance does not disappear, and the code error button is constantly lit on the control panel. In this case, you must act in this order:

1. Stop the express wash procedure and load the liquid pouring program. It is also possible to release the lock for closing household appliances and remove unreached laundry.
2. Next - after cleaning the cord for pouring water, start idle continuous program mode at 60 degrees. This procedure frees the system of pouring water from an excessive amount of washing and washing substances.

Important! If the code error is repeatedly displayed on the Samsung 5D washing machine, you will have to realize the seriousness of this problem and turn to a highly qualified specialist.

to contents ↑

Probable malfunctions requiring repair

Experienced specialists very rarely encounter malfunctions that require repair, when the 5D, SD or SUD errors appear on the display of the Samsung washing machine. Such cases do occur, so you should be prepared.

The main symptoms and causes of malfunctions:

• During the washing process, a 5D / SUD / SD error is generated on the Samsung washing machine, and the drum is without foam, and the error does not disappear even when household appliances work without linen and detergent. This all signals a malfunction of the foaming sensor, which just needs to be replaced.
• The 5D / SUD / SD error is displayed when turning on, washing or rinsing, but there is no foam in the drum and when restarting the error does not disappear - quite rarely this indicates a malfunction of the control unit. In case of burnout of the processor of the control board, only the replacement of the unit will help, otherwise, repair can be done.
• At the moment the machine is turned on or during washing, the 5D / SUD / SD error pops up on the display. It is necessary to replace the water level sensor (pressure switch), which, in addition to the main function - measuring the amount of water, can also be responsible for foaming.
• When you start washing without powder, household appliances drain water for a long time, but the process goes fine, but if you start with powder, a 5D / SUD / SD error appears. This indicates a blockage in the sewer, drain pipe or hose, as water may leak and there is not enough opening for the foam. In this case, you need to clean the clogged place from foreign objects. Most often, a few simple steps are required, described in the article by reference, in order to clean the filter of the washing machine.

Important! If it is impossible to independently eliminate the problem, you should seek the help of experienced specialists.

to contents ↑

Samsung washing machine errors

Errors on the washing machine are classified according to the type of problem and the cause of the problem. Thanks to the automation of the Samsung washing machine, you can independently determine the problem and try to solve it:

• 4E, E1 - indicates an error during the gulf of water. Lack of water, too low pressure in the water supply system, malfunction of the electronic controller, damaged valves, damage to the water level sensor - all this can cause this error.
• 5E, E2 - shows that for a certain time the water from the tank did not have time to merge. This error on the washing machine may occur due to a clogged drain path, hose or filter, a malfunction of the drain pump or electronic controller, or a breakdown of the water level sensor.
• OE, E3 - indicates that the overfilling level has reached the water level in the tank and the drain pump will automatically start within 3 minutes. The reasons may be breakdowns of the drain motor, water inlet valve, level sensor or electronic controller.
• UE, E4 - manifested due to the imbalance of the laundry in the drum during washing. This problem is very easy to solve using the optimal arrangement of things (remove unnecessary or add missing). If this does not help, then the problem lies in the damage to the drum drive or electronic controller.
• HE1, E5 - demonstrates problems with the process of heating water. The main reason is the failure of the heating element, because of this, the water temperature does not have time to increase by more than 45 ° C in 5 minutes.
• HE2, E6 - indicates problems with the heating element. In this case, it is necessary to check the heater circuit, and if necessary - replace the heater either a control module.
• IE, E7 - this error on the washing machine indicates a breakdown of the water level sensor, in which the signal frequency values ​​go beyond the upper (30 kHz) or lower (15 kHz) limit. As a result, the drain pump starts automatically. In this case, you should check the tightness of the tube that connects the sensor and the tank, as well as inspect the water level sensor, if necessary, replace it.
• CE, E8 - shows that there is a mismatch with the water temperature norm, namely for a certain time a significant temperature increase occurred (more than 45 ° C for wool and delicate fabrics and more than 60 ° C for synthetics). As a result, the drain pump starts automatically. The cause may be malfunctions of the temperature sensor, heater and their circuits.
• LE, E9 - warns that four times a spontaneous discharge or leakage of water has occurred and now there is an insufficient level to turn on the heater. Most often, this problem occurs due to depressurization of hoses, tanks or other elements of the washing machine. It is also possible that the water leakage sensor is broken and the connection of the drainage hose should be checked for correctness.
• 3E, EA - indicates a broken winding of the motor or tacho sensor. This problem manifests itself if the number of pulses from the tachometer is less than 2 in 2 seconds after turning on the motor. In this situation, replace the engine or tachometer.
• BE, EB - this error on the washing machine occurs if more than 300 signals per second are emitted from the tachometer during the washing process and indicates a thyristor is closing. To solve the problem, it is necessary to replace the engine, tachometer or control module.
• tE, EC - indicates a short or open of the thermistor. It is only necessary to replace the thermistor (TEN sensor) with a new one.
• DE, DOOR - warns of leaks in closing the hatch door or full opening. Here you need to try to close the hatch more tightly. If it does not help, you should check the operation of the locking device of the hatch or the electronic controller.

to contents ↑

Stock footage

From this article, you learned not only what the error is on the Samsung 5D washing machine, but also the decryption of other codes. This means that any malfunction in the work of your assistant can be fixed immediately, without waiting for the arrival of the master.