The washing machine does not turn on

What to do if the washing machine does not turn on? Such situations panic a large number of housewives who have encountered a similar problem. The reasons why the machine stops working are many, but not all cases are critical and require the purchase of new equipment. We will talk about this problem and how to solve it in this article.

to contents ↑

The washing machine does not turn on. Causes

What an annoying situation, the washing machine worked diligently, without a hint of damage, but once again, about to wash, throw clothes in the drum, fill the powder, and pressing the power button, it turns out that the washing machine does not turn on. In a panic, click on all the buttons, check if the washer door is closed, but all is in vain. What to do in this case? What are the causes of this malfunction?

The washing machine may break down due to wear of working parts, improper operation and for other reasons, which we will consider in more detail.

Important! But do not forget about simple elementary cases, such as problems with wiring, an outlet and the like, which are solved in a matter of minutes.

If not a single indicator lights up when connecting the device to the network, then you should not immediately unwind and disassemble the washer into parts. If such actions are needed, then they should be carried out only by specialists.

But everyone can cope with the simplest breakdowns.

to contents ↑

Reason number 1. No electricity

No matter how strange it may sound, but first of all, the reason why the washing machine does not start is the lack of electricity in the outlet. This can happen in several cases.

Lack of electricity in the room

This option, although very banal, is also not worth excluding. The lack of power in the room is very difficult not to notice, because all devices and equipment will cease to function.

How to fix the situation?

In this case, you can only wait until they give electricity again. You can call the power grid and ask about the cause and duration of the inconvenience. Perhaps your call will be a signal about a malfunction on the power line.

Knocked out machine

Do not understand why the Samsung, Indesit, Beco washing machine does not turn on? A possible cause of the malfunction could be a short circuit, from which the protection is triggered and the power to the room is automatically turned off.

Important! It may well serve as a malfunction of the outlet, burnt contacts or moisture inside it.

How to fix?

To restore the power supply in this case is quite simple:

1. Find the switchboard, which is located indoors or on a common span.
2. Carefully inspect the circuit breaker - it should be in an upright position. If it is turned off, lift it up.

Further - read more about this problem in the article. “Knocks the machine when you turn on the SMA”.

Important! If the switch automatically knocks out again, do not try to turn it on.Perhaps it did not work by accident, but there was a problem with the wiring. Consult a specialist to prevent a short circuit.

RCD worked

If a protective shutdown device is installed in your room, then most likely, for some reason, it worked. As a result, the power supply was cut off. Therefore, the washing machine does not work.

The system can work in several cases:

1. An electrical leak has occurred on the instrument.
2. Faulty RCD system.
3. Poorly made wiring in the apartment.

How to fix?

It is not recommended to fix the cause of such a problem yourself. In this case, it is necessary to seek specialist help from a specialist.

Outlet malfunction

Sometimes the answer to the question why the washing machine does not turn on is hidden in the malfunction of the outlet.

How to fix the situation?

To exclude the option with the incorrect functionality of the outlet, it must be checked for operability. To do this, you should do one of the following:

• Plug any other appliance into this outlet.
• Use a multimeter to check for power in it.
• The presence of a phase in it can be checked with a special indicator screwdriver.
• As a last resort, connect a 220 V bulb with wires.

Important! If all or one of the methods showed that the outlet is working, it should be concluded that this is not the reason why the Ariston washing machine or another manufacturer does not turn on. If the outlet is confirmed to be damaged, contact an electrician to fix it. An article on proper connection of the SMA to electricity.

to contents ↑

Reason No. 2. Malfunction of a network wire

So, when all possible malfunctions with electricity are checked, and they are not the reasons for the lack of any action on the part of the washing machine. So - the problem may be related to the network cable or extension cord.

Important! All subsequent actions must be carried out only after the blackout of the washing machine.

Defective extension cord

In many cases, the outlet is much further from the installed device. If you use an extension cord to operate the machine, it is possible that the washing machine does not start, it is in it.

How to fix?

• To solve the problem, you must connect the machine directly directly.
• Use a different extension cord with a larger capacity.

Power cord malfunction

The cord that goes from the machine to the outlet is often subject to heavy loads. Very often, due to improper winding, it breaks, contacts burn out due to the difference in electricity, other similar troubles happen. Such a breakdown may well be the reason that the LG, Ariston, Indesit washing machine does not turn on.

How to fix?

• First of all, visually inspect the cord and plug for signs of burning. Make sure there is no sharp smell of melting plastic.
• You can check the serviceability of the wire with a multimeter. It is necessary to “ring” the cord along the entire length.
• If you find a fracture site, be sure to replace it with a new one.
• In extremely rare cases, the gap can be insulated with electrical tape.

to contents ↑

Reason number 3. The power button does not work

There are certain models of machines, after connecting which to the network, the power goes to the power button. Based on this, if for some reason the button is faulty, the washing machine will not turn on.

How to fix?

1. First you need to establish exactly whether the button works or not. You can determine this using a multimeter.
2. Set the buzzer on the device. With the machine turned off, “ring” the button.
3. The multimeter should not work if the button is inoperative.
4. If the start button works, the multimeter should make a squeak sound.
5. Due to a negative result, the start button must be replaced.

Important! To replace machine parts, contact a specialist technician. Do not risk it and carry out repairs of this type on your own.

to contents ↑

Reason number 4. FPS interference filter malfunction

The interference filter in this embodiment is intended to reduce the level of electromagnetic waves from the unit during its operation. Otherwise, other devices may work with interference (TV, radio and computer). If the FPS filter fails, when the device is connected to the network, the current does not pass further along the circuit, respectively - the washing machine does not turn on.

How to fix?

1. Remove the top cover from the washer, find the filter. It is located on one of the walls of the machine.
2. Verify that the problem is with it, or verify the opposite. This can be done with the help of a multimeter already familiar to us.
3. At the input of the FPS there are 3 wires: phase, zero and earth. You need to “ring” these contacts.

Important! If the result is positive - the current flows in, it is necessary to check whether it goes further along the circuit.

4. At the output there are 2 contacts: phase and zero. If the multimeter does not show a positive result, we conclude that the problem is the FPS filter and it needs to be replaced. The device can be purchased separately or with a network cable.

Important! If you are not a specialist in this field and do not have the skills to work with electricity, “ring” the contacts with de-energized equipment. Switch the multimeter to the “dialing” mode, remove the wires from the FPS, close one terminal of the device to the input, the other to the output, and carry out a similar process with zero. FPS should “call”.

to contents ↑

Reason number 5. Open circuit wiring

During the operation of the machine, some parts may come into contact with each other. During vibration, the wires can rub against each other or disconnect from the mounting location.

How to fix?

1. Remove the top panel from the machine, carefully inspect all visible parts of the device.
2. If mounting some of them is suspicious, use the multimeter to “ring” them.
3. Repair the faults found.

to contents ↑

Reason number 6. The control module does not work

The reason that the washing machine does not turn on may be a breakdown of the control module. But before making such a conclusion, it is necessary to exclude all the above reasons.

How to fix?

1. A malfunction of the control module is a serious and expensive failure of the device. Not in all cases it has to be changed completely, sometimes it makes sense to fix the device. For possible solutions to the problem, see the information in the article. "The control module of the washing machine".
2. Unfortunately, without certain experience and the necessary knowledge, it will not be possible to eliminate the cause of the malfunction independently.
3. Contact a master for expert assistance.

to contents ↑

The washing machine turns on but does not work. What to do?

When the appliance was connected to the network, a signal sounded, all the on indicators turned on, but after setting the necessary parameters of the cycle, the equipment does not start and the washing does not start? The causes of this kind of malfunction can be the following.

Door lock does not work in the car

This is a fairly common and most common problem with absolutely any brand of washing machine. In some models, the washer is programmed under the code name the cause of the breakdown, which makes diagnosing a malfunction much easier. In the instructions for the appliance, the manufacturer describes the possible reasons why the washing machine does not start.

How to fix?

1. The first thing to do is to check if the washer door closes.
2. Set the appropriate washing mode and start the machine. Pay attention to the lock of the hatch after starting the program.
3. If the door does not lock, it is most likely the fault in this.
4. “Call” the hatch of the machine with a multimeter. After starting the program, voltage is applied to the door and a direct lock occurs.
5. If, as a result, there is voltage at the input, but blocking does not occur, the door will have to be replaced.

Important! For a quality repair, contact the home appliance repair shop.

When connected to the network, the washing machine flashes

As soon as you connected the machine to the network, an audible signal sounded, all the indicators began to flash continuously, as at a traffic light, or turn on in a chaotic manner? In this case, we can say for sure that the washing machine broke down and it does not turn on due to wiring malfunctions.

How to fix?

There are several ways to restore the normal operation of equipment:

• Do not spend a lot of time, but call a wizard who will conduct a complete wiring replacement.
• In the second case, “ring the wires”, detect the faulty section, make its partial replacement.

to contents ↑

Stock footage

The failure of the washing machine for each housewife is a very painful and unpleasant situation. But do not be very upset, because almost always the breakdown can be eliminated. The most important thing in this case is to timely detect the reason why the washing machine does not turn on, and carry out proper repair of the equipment. Some breakdowns can easily be dealt with independently, while others can only be fixed by repair technicians of household appliances. If you have never dealt with electronics, do not have special knowledge in this area, for the best result, contact the workshop. Thus, you will save your time and money, which in the future will have to be spent on the elimination of unskilled self-repair.