How to clean a teflon-coated iron from burnt cloth?

Even with the most careful use of the iron, there are times when you should clean it. Of course, many manufacturers claim that this or that model of household appliances of their brand after purchase does not need additional care. But experience shows the opposite. That is why we have put together the most effective tips on how to clean a Teflon-coated iron from burnt cloth.

to contents ↑

Teflon - what kind of material?

First, let's figure out what Teflon itself is. This is a very unique material. It is both slippery and durable, so Teflon has found its application in the manufacture of many household appliances.

This material easily irones synthetic things even at low temperatures. But he has one drawback - chips easily appear. Therefore, it is necessary to clean the iron from burnt Teflon-coated fabric very carefully and carefully.

Important! Teflon is resistant to the effects of any aggressive chemicals, including acids and alkalis. But direct mechanical action with sharp objects is unacceptable, since after the formation of scratches on the coating, its properties, which are so important for ironing and ironing of different fabrics, are reduced.

to contents ↑

Causes of pollution

Before you understand how to clean the surface, you need to understand the causes of contamination of irons. The main few:

1. Dirty water. Because of it, scale is very actively formed when using the steam functions of the iron. To avoid scale damage due to scale, use purified water. Our separate review will help you choose filters for water purification in the apartment.
2. Long-term contact of the heated sole of the iron with synthetic fabrics, therefore, for each type of fabric you need to properly set ironing mode.
3. It is also possible the usual hit of sticky or resinous substances, which from the temperature stick even more to the Teflon surface.

Important! The frequent interaction of all these factors inevitably entails damage to the surface and a decrease in its sliding properties. It is not safe to iron things that are dirty with a household appliance, especially white and light colored ones. You can irreparably ruin the product if the dirt from the sole of your household appliance goes over to the material and literally “solders” into it at high temperature.

to contents ↑

Cleaning pencil

Perhaps all the housewives have heard of this wonderful tool that will help you clean the iron at home with a Teflon coating. But not everyone knows how to use it correctly.

First you need to say that a cleaning pencil for iron can be purchased at any hardware store - this is not a problem. And it must be applied as follows:

1. Preheat the iron to a maximum temperature in an upright position.
2. Next, you need to disconnect it from the network and rub it well with a pencil.
3. Wait for the iron to cool and wipe the sole with a paper towel or any cotton cloth.

This procedure can be repeated several times until the sole of your home appliance is perfectly clean. Be careful and not in a hurry so as not to burn your hands, erasing dirt from the heated surface of the plastic.

Important! When you feel an unpleasant smell, do not be alarmed, this is a normal chemical reaction of melting a pencil.

to contents ↑

Vinegar or citric acid

If you were wondering how to clean a Teflon-coated iron from burnt cloth, then this tip should help you. The fabric may clog into the steam holes, and it is impossible to remove them from there mechanically. But the situation can be corrected in another way:

1. Take one part vinegar and dilute it with two parts pure water.
2. Moisten a cotton cloth larger than the iron well and spread it on the ironing board.
3. Slightly warm the iron and, unplugging it from the network, put on a cloth.
4. After 10-15 minutes, wipe the sole with a damp sponge and enjoy a clean iron.

Citric acid also helps a lot:

1. First, prepare a solution of 200 ml of purified water and one teaspoon of citric acid.
2. Pour the resulting liquid into the water compartment, about half, turn on the steaming mode.
3. You need to alternate several times - 10 seconds of steaming and 15 seconds of a break.
4. After - it remains only to wipe the cold sole with a damp sponge.

to contents ↑

Nail polish remover or hydrogen peroxide

Three percent hydrogen peroxide or nail polish remover without acetone will help clean a Teflon-coated iron from burnt fabric. Soak a cotton pad with any tool you choose, and then attach it to a burnt area on a cold iron. The fabric should come off without difficulty. Dry all over with a damp sponge.

to contents ↑

Stock footage

We hope these simple tips will help you understand how to clean a Teflon iron, because everything is extremely simple and effective.