How to clean the iron from the stick on the sole at home?

In a hurry or carelessness, anyone can set the wrong temperature on the iron or iron a thing that is not subject to such processing. The result is spoiled clothing with tan and soldered fibers and a deposit of carbon deposits on the iron. If a thing may have to be parted or restored in an original way, then it is not worth getting rid of household appliances, and even expensive ones, for this reason. There are several ways in which you can solve the problem of how to clean the soles of iron on the sole at home.

Important! If you are puzzled by the question, how to clean the iron at home from the burnMost likely you have a device with a metal sole. Teflon and ceramic coatings are positioned as non-stick, therefore, no burning on the surface is formed, and if it appears, then this is only an exception to the rule. Therefore, we will consider exactly those methods that are suitable for a stainless steel surface.

to contents ↑

Universal Method - Cleaning Pencil

In the household chemicals market, you can easily find special cleaning pencils from different manufacturers. All of them are made, as a rule, according to a similar principle and are extremely simple to use.

Important! Which manufacturer to give preference to does not make a fundamental difference. Pencils of any brand perfectly clean carbon deposits, so just choose a product that is affordable for you.

A pencil is used to clean the sole of the iron in this way:

1. Plug in the appliance.
2. Set to 1-2 heating mode.
3. As soon as the sole warms up, process the problem areas with a pencil - it should melt.
4. While the mass has not yet frozen, take a clean rag and wipe the product with the burnout or spread out the lining white cloth and iron it several times with a little pressure.
5. Repeat the procedure several times until the surface is completely cleaned.

Important! As mentioned above, the ceramic sole is non-stick. But there are times when a burnout forms on them. Recommendations from our separate publication will help to remove it. "How to clean the iron from ceramic deposits?".

to contents ↑

Handicrafts - vinegar, citric acid

These 2 products are universal cleaning products - they are used everywhere in everyday life: for bleaching clothes, shoes, cleaning dishes, furniture. They can cope well with soot using household ironing equipment. To clean the iron from the stick on the sole at home using one of these tools, proceed as follows:

1. Prepare a medium-concentrated solution: citric acid 1 pinch per 1 tbsp. water, vinegar is mixed with water in a ratio of 1: 1.
2. Heat the iron, but not to the highest temperature.
3. Wet a clean, dense cotton cloth or cotton pad with the solution.
4. Wipe gently so as not to burn your fingers, all problem areas.

Important! The main reasons for the appearance of soot on the sole in most cases are improper temperature and non-compliance with the rules for the care of materials. To prevent this from happening in the future, use our instructions:

• Ironing mode selection. 
• Overview of fabrics that do not need to be ironed.

Important! Note that if you use vinegar, then when heated, its pungent specific aroma will increase. Be careful not to damage the airways and mucous membranes of the eyes.

to contents ↑

Custom approach

Wax is not a cleaning agent, but in this case it is perfect to clean the iron from a burn at home. An ordinary candle will be more convenient to use - paraffin or wax does not matter much.

Such a tool is used according to the same algorithm as a special cleaning pencil: warm the sole, move a candle along it, remove the molten mass with soot, until it hardens with a clean rag.

to contents ↑

Wrong way

Previously, irons were exclusively with a metal surface, not everyone knew about the possibility of using vinegar, and they had not yet come up with special cleaning pencils. Therefore, they masterfully coped with the problem in a laborious and not quite right way - with the help of a blade: they simply scraped the soot mechanically.

Important! If the sole is hopelessly spoiled, most likely it's time to choose a new iron. We have prepared a separate review, which examined in detail the best models of irons.

Doing so is not worth it for the reason that during such exposure, soles form on the sole. They will subsequently affect the ease of sliding, as well as the cleanliness of the surface. But if nevertheless you did not know about other methods or did not have suitable means at hand and cleaned the burn with a blade, try to slightly correct the situation using the following method:

1. Take the finest grit sandpaper.
2. Carefully walk it on the sole of the iron to sand.
3. Wax the surface - rub well, do not spare the candles.
4. Heat the appliance and iron a clean lining cloth.

Important! These measures should be enough for a while to iron you easily and quickly. Repeat this procedure as the slip decreases.

When cleaning the soles of the appliance from soot, do not forget descale the iron inside.

to contents ↑

Stock footage

We hope this article was useful to you and our advice helped you solve your problem exactly at the moment when it was necessary. Be careful when working with heating appliances so that you do not have to restore either their parts or your favorite clothes.