How to clean the washing machine from smell and dirt?

Today it is very difficult to imagine our life without a washing machine, it saves a lot of time and a waste of our energy. However, the technique requires constant care and you need to know how to clean the washing machine from smell and dirt. Otherwise - it just might fail. How to clean correctly so as not to damage any parts of the washer? This is described in detail in our article.

to contents ↑

How to clean the washing machine from dirt inside?

There are several proven methods that will allow you to clean the washing machine at home without any difficulties. To do this, you can use not only special household chemicals, but also many products and household substances.

You can use such simple tools as:

• soda;
• lemon acid;
• vinegar;
• chlorine bleach.

Without a doubt, at least one product from this list is necessarily available at your place. Consider how to properly apply these funds in order to clean washing household appliances.

Important! If the inside of the tray, the rubber on the door, or other parts are covered in black, special measures will be required. Moreover, you can not leave them unattended and continue to wash their things in this technique, as this is fraught with bad health consequences. Read abouthow to clean the machine from mold and mildew. 

to contents ↑

How to clean a washing machine from dirt inside a soda machine?

The inner walls of the washing machine will help clean ordinary baking soda. With its help, you can cope with the appearance of molds on various parts of the technique.

Important! Soda treatment is best done at least once every 7 days. This frequency will protect the equipment from an unpleasant fungal infection, prevent its appearance and spread.

Cleaning Procedure:

• Dissolve soda in water at room temperature, taking soda and water in equal proportions.

Important! In order not to scratch the plastic or damage other parts of the machine, make sure that the soda is completely dissolved in water before use.

• Using a sponge, apply the mixture to the surface of the parts that are inside the machine.
• Rub surfaces, then rinse with clean water.

Important! Rubbing should not only metal parts of the equipment, but also rubber parts.

• Dry all washed items.

Important! All users of washing machines were faced with the problem of contamination of the powder tray. It can be either an accumulation of powder, and mold, dirt. Our post will help you cope with this problem. “How to clean the powder tray in the washing machine?”.

to contents ↑

How to clean the washing machine from the dirt inside the machine with vinegar?

Acetic acid is available without exception for every housewife.Most often it is used to prepare delicious dishes. However, this fluid also successfully copes with the tasks of bringing home and equipment into a state of cleanliness. You can clean the inside of the washing machine as follows:

• Pour about two glasses of acetic acid into the washing machine.
• Plug the appliance into a power outlet, set the long wash mode and start the cycle.

Important! The water temperature should be the highest so that the cleaning effect is maximum.

• Leave the machine in the selected mode for about five minutes. After that, turn on the “pause”, let the device stand in this state for 60 minutes.

Important! During this time, acetic acid will dissolve most of the contamination, while not causing any harm to the parts themselves.

• After the time for soaking, the wash should be completed.

Important! A cycle with acetic acid should be carried out without additional detergents and without laundry, idle, otherwise, concentrated liquid can lead to damage to the structure of tissues.

• Remove any acid left in the machine by doing another wash cycle.
• Rinse all parts with clean water and wipe them dry.

Important! You can clean the washing machine from dirt under the rubber band with a solution consisting of equal parts of water and vinegar. After such processing, the parts must be wiped dry.

Important! From a wide variety of contaminants, and even to dissolve scale, you can use such a common tool as Domestos. But this is a potent and aggressive tool, so it must be used correctly so as not to make it worse. Read about suitable methods in the review."Cleaning the washing machine Domestos".

to contents ↑

How to clean the washing machine of odor and dirt with citric acid?

Citric acid can easily remove mold, dirt, limescale and an unpleasant odor from parts of the washing appliance. As a result of the action of citric acid on the pollution structure, it is destroyed and exfoliated from the surfaces of the washing elements.

Cleaning Procedure:

• The inside of the washing machine can be cleaned with two hundred grams of citric acid.
• Pour the lemons powder into the powder container.
• Activate the “long wash” mode with the highest possible temperature.

Important! To achieve the effect, water should be at least 60 degrees. The entire cycle is carried out exclusively idle, without linen and additional detergents.

• After the wash cycle, turn on an intensive rinse so that all acid residues can be removed from the parts.

Important! Cleaning the inside of a washing machine in this way should be done no more than once every three months. More frequent use of acidic powder will damage the rubber components of the unit.

Important! Laundry detergent may not cope with all contaminants. Allergy sufferers are not recommended to use it. An alternative is the old proven method, laundry soap. Find out, how to use laundry soap in a car.

to contents ↑

How to clean a washing machine from dirt inside at home with a chlorinated product?

From the lime and fungus, the internal parts of the washing household appliance will help clean the chlorine-containing bleach. Ideally, in this case, the usual "White" is suitable.

Important! The frequency of such cleaning should not exceed three times a month.

Cleaning Procedure:

1. Measure a full glass of bleaching agent with a measuring cup and pour it into the drum of the automatic machine.
2. Set a long washing mode with a water temperature of at least 60 degrees.
3. After the cycle, rinse everything with clean water and wipe dry all washed parts.

Important! The only significant drawback of this method will be the presence of a sharp unpleasant smell of bleach during the procedure.In this case, it is recommended to open the bathroom door and the window of the adjacent room for effective ventilation.

to contents ↑

How to clean the washing machine from dirt inside the machine and smell? Special tools

In the market of household chemicals, you can buy a special tool for cleaning a washing machine from smell and dirt. The instructions on the package describe in detail how to use them. The use of industrial chemistry gives results no worse than the use of the above products.

The most famous and popular are the following tools:

• Calgon. It copes with lime.
• "Anti-scale." The components of the product effectively remove limescale on the walls and parts of the washer.

Important! Use industrial facilities should be strictly according to the instructions. It is necessary to start the machine for cleaning without a load.

to contents ↑

How to wash the washing machine from the inside?

Many housewives are interested in the question of how and how to wash the washing machine inside? Of course, household appliances for washing should be cleaned not only from the outside and the visible parts of the drum, but also other internal elements.

Filter cleaning

It is the pollution of the filter of the machine that can cause an unpleasant odor, poor circulation of the liquid inside the washing device and even a flood. Therefore, we act like this:

• To avoid the unpleasant consequences of a clogged filter, you must periodically open the bottom panel in the device, drain the stagnant dirty water and pull out the filter to clean it.

Important! Be sure to close the water access to the washing unit before this.

• You need to clean the part from the outside and inside.
• All garbage from the filter element is removed, and the clean part is returned and fixed in place.

Container cleaning

In addition to the filter, the compartment where the washing-up liquid and fabric softener are filled up should also be cleaned. You can clean the container for washing powder using the liquid “Comets. Double effect ”:

• You just need to fill them with the removed plastic part in a small container and leave for several hours.
• After that, rinse the container with clean water.

Important! The container should be cleaned regularly after 5-7 washes.

Glass door cleaning:

• You can remove various impurities from the surface of the glass on the door using an acetic solution of 50% concentration. You can cook it yourself by mixing vinegar and water in equal quantities.
• After wiping the glass with a solution, it is recommended to wipe the glass with a damp, clean cloth and dry it.

Important! Few would argue that getting rid of old equipment is more difficult than buying a new one. If you bought a new machine or are planning to purchase it, our practical advice will help you resolve the issue,where to put the old typewriter.

to contents ↑

Prevention of scale formation on the details of the washing machine

Nevertheless, the main problem of washing equipment is the appearance of scale on the heating elements. Such a neoplasm threatens the failure of technology. The reason for this phenomenon in most cases is too hard water, which has a large amount of salts in its composition. They are deposited in the heating process on the heater.

It is much easier to prevent the appearance of scale than to fight it. Therefore, we offer you some tips that will help solve this problem:

• If you know that your water is quite hard, you should add a water softener to the washing unit with each wash. It can be ordinary citric acid, soda or a special-purpose product “Kalgon”.
• In order to prevent the appearance of limescale on the heating element of the washing machine, it is necessary to periodically add a small amount to the water soda ash. Its components, combining with salt molecules in water, prevent the formation of scale on the heater.
• For washing, it is recommended to use more often modes with medium and low water temperatures - this prevents the formation of scale on the heating element.

Important! Washing at high temperature - on the contrary, stimulates the process of salt deposition on the walls of the heater.

• If the clothes are dirty enough and do not wash at low temperatures, it is recommended to use manual pre-washing of clothes. Although it is laborious, it will definitely extend the life of your washing equipment.
• Try to wash less shabby things in the washer, as washing such clothes will produce a large number of small particles that contribute to the formation of lime on the elements of the machine. It is better to wash such things manually or in devices of an activator type.

Important! Please note that we devoted a whole post to the issue of descaling in washing machines. The best recommendations checked by many housewives for you in our article “How to remove scale in a washing machine?”.

to contents ↑

Stock footage

It is very important to know how to clean the washing machine at home. A lot depends on this: the service life of the household appliance, the cleanliness of clothes, and the absence of an unpleasant odor both on the laundry and on the equipment itself. Using the recommendations from the article on cleaning all parts of the unit, you will do all the work quickly and easily. And useful tips will help prevent the formation of scale on the heating element and will save you from additional expenses and unnecessary problems.