Ceiling plinth - how to make a corner, how to cut corners correctly?

The whole impression of the room depends on the ceiling decoration. Therefore, they try to make repairs almost perfect. The decoration of the ceiling completes the installation of the ceiling plinth. Attaching it is easy enough, the biggest problem is making out the corners. Ceiling plinth - how to make a corner, how to cut corners correctly, all this must be known, as otherwise a lot of material will be damaged. It is precisely this part of the work that we will reveal in detail in this article.

to contents ↑

Production material

The baseboard is not only designed to decorate the room. With it, you can hide the technical and natural gaps between the ceiling and the wall. In addition, thanks to him, the joints do not crack at the interface between the walls and the ceiling plate.

The most popular for the manufacture of skirting boards for the ceiling are polystyrene, gypsum, plastic, polyurethane and wood. Each raw material has its own advantages and disadvantages.

Styrofoam

Products from this material are distinguished by a low price and ease of installation. They are easily trimmed with a knife, moreover, they withstand multiple colors. Lightness and soft edges of foam materials make it easy to visually eliminate unevenness in the ceiling.

Important! The disadvantage of these fillets is fragility, so be careful when installing.

Polyurethane

Fillets from this material appeared relatively recently, but immediately gained popularity among consumers. This durable and lightweight material can easily cope with temperature changes, it tolerates moisture and mechanical damage well.

Wood

This material belongs to the elite. It is suitable for decoration of luxurious luxury rooms with its original style. For the manufacture of ceiling frames, the following types of wood are usually used:

• Oak
• Fir tree;
• Ashen;
• Mahogany.

Gypsum

Gypsum is a traditional material from which stucco molding and ceiling plinth are made. The plasticity of plaster moldings allows you to create unique decorative elements.

Important! The material is distinguished by high environmental friendliness and durability, but products made of it are quite expensive.

Plastic

Plastic baseboard is a cheap, easy-to-use material. Its main advantages are moisture resistance and many colors. The skirting board can be smooth or embossed, of a usual color or imitation of metal.

Important! When choosing a plastic ceiling baguette, be sure to consider that it cannot be repainted.

to contents ↑

Installation tools

Before cutting the ceiling plinth in the corners, it is necessary to prepare the tool. Most often it needs to be found on the farm. Need to cook:

• Ruler or tape measure;
• A hacksaw or a well-sharpened knife;
• Pencil.

Important! You can also use the miter box - a wooden or metal object used to guide the hacksaw or knife in the right direction. Thanks to such a tool, it will be much easier to work, but you can cope without it.

Before you make the corners on the ceiling plinth, it is worth practicing on other material.

Important! When working with polystyrene or polyurethane fillets, gloves should be worn, as fingerprints may remain on the surface.

to contents ↑

We cut the corner with the help of a miter box

With the help of a miter box, the blade of a knife or hacksaw is clearly directed in the right direction, making it much easier to work. If you are just learning how to make a corner on a ceiling plinth, it is better to use auxiliary templates.

When using the tool, we follow the instructions:

• Insert the baseboard into the miter box. However, its location should be parallel to the future location on the ceiling. After installing the part correctly, fix it in the tool.
• From the special channels located in the sides, we select the ceiling that is suitable for the parameters.

Important! Different blades are used for different materials.

• We cut the skirting board and apply it to the ceiling for testing.

to contents ↑

We cut a corner without a miter box

The above describes how to make the inner corner of the ceiling plinth with a miter box. We will figure out how to do this without this useful tool. There are three ways to cut fillet.

Method 1

It is necessary to make a device similar to a miter box with your own hands. It consists of three tablets. They are assembled in such a way that a right angle is obtained between the sides and the middle. After that, the channels are cut at an angle of 45 degrees. Thanks to such a device, the question of how to make a 45 degree angle on a ceiling plinth will no longer appear.

Method 2

When cutting in this way, accuracy must be observed. The design of baguettes is initially drawn on paper, we measure all angles and distances. To speed up the process, you can draw directly on the fillet.

Method 3

This option will be the fastest. We take a ruler and a pencil and draw a skirting board right at the joints connecting the ceiling and walls.

to contents ↑

Rules for gluing a ceiling plinth

After the information on how to make the outer corner of the ceiling plinth, you need to know how to glue it correctly. To make the design work without problems, you need to follow a few simple rules:

• Installation begins from the corner of the room, since it is easiest to draw it up.
• When gluing corners, make sure that there are no gaps.
• The areas on which the fasteners will be located are carefully covered with soil or ordinary water.
• After the putty mixture dries, all the cracks are carefully sealed with sealant with acrylic in the composition.

to contents ↑

Stock footage

It is quite possible to create a harmonious design in the apartment with your own hands. Be sure to remember that it is important not only to tidy the walls and floor, but also to finish the ceiling again. At the same time, the ceiling plinth is the finishing touch that emphasizes the sophistication of the decoration.