How to wash the resin 🥝 how to remove and wipe the pine, wood, coniferous, spruce resin

You can get dirty with tar in the summer on a walk, at a photo shoot or even in winter at home. The Christmas tree is pleasing to the eye, but until you find solid formations on the floor. What to do in this situation without harming expensive flooring? How to wipe the resin from the pine from linoleum? There are many ways to get rid of this problem. It is much easier to remove wood resin from the laminate than from the skin of hands, clothes, and especially hair. Today we will consider the simplest and most affordable methods of cleaning different types of floor coverings from such a sticky mass.

to contents ↑

How to wipe the resin from the pine from the laminate?

Sticky tar from a New Year’s beauty hit the floor? Have you recently made repairs with an expensive laminate? We suggest using gentle means so as not to spoil the flooring. Laminate due to its texture often imitates natural wood species. That is why the coating should be treated very carefully and gently, and in case of contact with resin, choose the safest way to eliminate the sticky stain.

Dishwashing liquid:

1. We put a little detergent on the blurred surface of the laminate.
2. Wipe the place with a slightly damp cloth.
3. We continue the procedure until the sticky stain completely disappears.
4. We remove the remnants of the cleaning agent from the surface with a damp and then a dry cloth. If this is not done, then a bright area may form on the coating.

Important! Performing the above steps, first practice on the area of ​​the laminate that is not visible or on a piece of material that you have left after the repair.

Soda

Soda does an excellent job with such a formation, as it enters into a chemical reaction with wood resin and can quickly soften it. Most importantly, there will be no harm from prolonged exposure to coated soda. So, to carry out such work you will need:

• Soda - 3 teaspoon
• Water - 1 tsp.

Instruction:

1. We combine soda with water and make gruel.
2. We apply the product on the stained area of ​​the laminate. We remove the resin, moving from the edges to the center.
3. Wash off the cleaning composition with warm soapy water.

Important! Soda can be used to remove tar from the skin of hands - both an adult and a child. This composition is completely safe. The only thing you need to monitor so that the soda solution is as liquid as possible.

Coca cola

As a solvent, you can safely use such a drink. Why not, because it is with the help of Coca-Cola that many things are cleaned: pipes from rust, a sink, a bath from plaque, pans from burnt food, electric kettles and much more. The effectiveness of the drink is due to the presence of phosphoric acid and carbon dioxide in the composition.

Working process:

1. Mix 1 liter of Coca-Cola with 1 tbsp. a spoon of soda.
2. Thoroughly wet the contaminated area of ​​the laminate.
3. Keep the solution for about 10 minutes.
4. We wash the floor with soap and water.

Important! To remove the resin from the floor, you can take not only Cola, but Sprite and Fanta as a basis. The same means can be safely used to clean household appliances from dirt, mold and scale.

Sunflower oil

This method is absolutely safe for any type of flooring, as well as for textiles, skin of hands or hair.Sunflower oil is able to modify the structure of epoxy resin to a more liquid one. You will not harm the laminate in any way - you will not scratch or lighten it.

Instruction:

1. We apply sunflower oil abundantly on a cotton cosmetic disk.
2. Rub the greasy mixture into the contaminated area for 30 minutes until the resin completely disappears from the coating.
3. Wash off the oil with soapy hot water.

Peanut Butter and Mayonnaise

You can solve the problem with the help of folk methods. Mayonnaise and peanut butter will help us with this. They perfectly soften the resin and do not harm any floor covering, including the laminate.

Step-by-step instruction:

1. Apply peanut butter or mayonnaise to the contaminated area.
2. We put a plastic film on top of the laminate.
3. We stand the products for 30 minutes.
4. We wash off the remnants of the chosen folk remedy with running water and soap.

Now you know how to clean the pine resin from the laminate. It's time to consider options for eliminating a similar problem from the surface of linoleum.

to contents ↑

How to wash resin from pine from linoleum?

So we got to the next flooring - linoleum, which is widely used in many apartments. Let's look at the main ways to remove wood tar from the most common flooring material.

Rubber glue

Perhaps you did not know that the composition of any rubber glue necessarily includes a solvent, which we need to act on the resin droplets that have fallen on linoleum.

We fix the problem:

1. Apply a small amount of rubber glue to the sticky surface.
2. Stand it on the resin for 10 seconds.
3. Finger roll off the departed substance.
4. Wash hands thoroughly with soap.

Important! Rubber glue should never be used on baby skin to remove epoxy from it. The exposure time of the composition on the problem area should be no more than 10 seconds. Otherwise - except for the resin, you will need to remove the rubber glue.

A solution of starch, ammonia and turpentine

Gum turpentine will perfectly cope with the resulting problem. Unlike technical turpentine, a natural product will quickly soften the spruce resin to a liquid consistency and will not leave a bright spot on linoleum.

So, for such an event, we need to take the following ingredients:

• Turpentine - 4 drops.
• Starch - 1 tbsp. a spoon.
• Ammonia - 3 drops.

Cleansing:

1. Mix the ingredients together.
2. We apply the composition to the contaminated area of ​​linoleum.
3. Gently rub the sticky area with a soft brush.
4. Wash hands thoroughly under warm running water.

Important! Remember that this ratio of substances can only be used to remove resin from the floor, shoes, clothes, and other household items, but not to cleanse the skin due to a very strong odor that negatively affects the respiratory system and because of possible burns on delicate skin . Work with such a tool only in a mask and gloves.

Acetone

Everyone knows acetone as a nail polish remover. But such a solution can also be used to remove already well-dried resin on the floor surface.

Important! It is necessary to act extremely carefully so as not to leave a bright spot. And one more thing: carry out a similar procedure in a well-ventilated area, away from children.

We remove the resin from linoleum:

1. We put on a sticky area a dense fabric with a solvent.
2. We are waiting for 1-2 minutes.
3. Repeat the procedure several times until the solid is completely softened.
4. We remove the residues first with a damp, and then with a dry cloth.

Important! In no case do not rub the problem area on linoleum with a sponge with acetone so that a bright spot does not form on the coating from solvent exposure.

Alcohol

Here is another way to wipe the resin from linoleum. Not only can this substance be used as a solvent for resin on floors, skin, clothing, hair, but it is also completely harmless.From its effect you will not receive a single chemical burn, on the contrary, it will sanitize your hands well in the process of removing tar from linoleum. The only caveat to remember: after applying alcohol, you need to smear the skin of the hands with baby cream.

Course of action:

1. Wet the cotton pad (swab, rag) in alcohol well.
2. We apply the solution to the resin for 15-20 minutes.
3. We remove the remains of the formation of wet gauze.

Lemon acid

This substance is widespread not only in the kitchen, but also in everyday life. Due to its chemical composition, citric acid dissolves the resin well in a short period of time.

Stages:

1. We pick up a cotton pad (you can take a sponge for washing dishes). Wet well with warm water.
2. Sprinkle generously with citric acid. We rub the resin off the floor, moving from the edges to the center.
3. Wash off the cleaning composition with warm soapy water.

to contents ↑

Stock footage

Most often, epoxy hardens within a day, but glazing can occur earlier, so it is extremely important to know how to wipe the resin from the floor. We really hope that the above methods to resolve this problem will help you protect your gender from sticky education.