DIY glass waterfall

Do-it-yourself waterfall on glass is a wonderful decoration of a modern interior. Water flowing down the glass at the same time pacifies and soothes. In addition, the presence of such a waterfall in one of the housing rooms has a beneficial effect on the microclimate of the room, humidifying the air. In this article, we will tell you about the features of making a waterfall on glass.

to contents ↑

Do-it-yourself street waterfall on glass

To begin with, we want to propose the option of manufacturing a decorative waterfall on glass, which is installed on the street. This design has the shape of a waterfall, where water runs along the wall.

When working on making this jewelry, you will need the following:

• Wooden boards.
• Timber.
• Veneer.
• Masking tape.
• Paraffin paste.
• Tempered glass, the size of which will determine the dimensions of the structure.
• Pump with minimum power, which will be used to organize the circulation of water.
• Plastic pipes.
• The stones.
• Brackets with fasteners.
• Stones for decoration.

Important! Various plants will look very organic next to such a fountain. And to make them beautiful, try our master classes make flowerpots for flowers.

The manufacturing sequence is as follows:

• From a board pre-treated with an antiseptic, make a box whose width will equal the width of the tempered glass. Treat the inside of the box with paraffin paste - this will prevent the wood from contacting with moisture. As the base of the waterfall, use a timber frame part.

Important! The internal dimensions of the structure must be such that a box is placed inside this caracas and is stable in it.

• After preprocessing, place the box inside the structure. Inside the box, lay a plastic film, preferably dark and opaque, with which you must achieve absolute tightness of the structure.
• Next, cut two boards, the dimensions of which should correspond to the height of the glass. These parts will fix the glass wall in the box. Use veneer to finish the future design. For finishing the drawer itself, use a wooden lining.
• On the central part of the box, install tempered glass. For its additional fixation from above above it also establish a board. Next, install the pumping equipment, connect the plastic pipes through which water will circulate.
• To fix the pipes on the side racks, use special rings that can be bought in the plumbing department of the store. Equip the top pipe with a hole so that the water flowing out falls onto the top of the glass.

Important! The size of the hole must be selected individually, for this first make a small hole, if necessary, gradually increasing it.

• The frame of the waterfall is additionally sheathed with any suitable material for this, paint and varnish.
• Inside the box, install stones that will perform a decorative function.
• Pour water into the bottom of the box and turn on the pump.

Important! The fountain can be additionally decorated with color effects by setting the LED backlight.

to contents ↑

Glass home waterfall

We offer another option for making a homemade waterfall on glass with your own hands, which can easily be placed in the bedroom or living room.

When working on making a waterfall, you will need the following:

• Organic glass, the size of which will depend on the size of the waterfall itself.
• Materials and bulbs for organizing lighting.
• Compressor.

Important! When choosing this element, you should pay attention to its noise performance - it should be minimal.

• Vinyl hose.
• Non-return valve.

Important! Perhaps, the interior of your home will be appropriate design and other items with glass. And for this, you can use not only transparent material. It’s very interesting to combine various details if make frosted glass at home.

The sequence of making a home waterfall looks like this:

• Before proceeding with the manufacture of the structure, create its drawing, which will clearly describe the size, parameters, manufacturing materials of each of the parts, the installation location of the backlight and pumping equipment and future decoration. The waterfall should be compact and not take up too much space.

Important! When choosing the width and height of the product, proceed from the individual dimensions of the room in which the waterfall will be installed.

• Equip the upper part of the waterfall with an additional panel cover that will protect the product from dirt and dust.

Important! Before starting the production of the waterfall, it is recommended to clean the glass surface with glass cleaner. For the operation of a home waterfall, it is advisable to use purified, distilled, water.

• In order for the waterfall to humidify the air and perform an aesthetic function, install lighting in it. For these purposes, you can use neon moisture-proof lamps, which can be bought at any hardware store.
• Create the foundation of the structure. It must be strong and capable of supporting the weight of glass and liquid, as well as airtight. In addition, the dimensions of the foundation should be such that a glass wall is easily placed in it.
• Install the check valve, air system and nutrients. It should be borne in mind that the valve provides a shutdown of the fluid supply or its complete solidification. In addition, it is advisable to set the backlight in advance and check the operation.
• Set glass of organic origin. It is on it that you turn on the backlight again.
• At the bottom of the pan, make a glass vessel in which water will be located.

Important! Note that the water level must be constant. Only in this way will the correct operation of the system be achieved.

• Air bubbles supplied by water must be uniform and uniform in shape, which will require the presence of an acrylic atomizer with additional openings.
• Decide on the location of the vessel with water. You can install it in the upper part of the waterfall or on the site of the connection of the floor and the podium.

Important! Glass is a very interesting material from the point of view of creating various objects from it. We also offer you some interesting ideas for decorating your home with the help of such material:

• DIY glass paintings.
• Stained Glass.
• Do-it-yourself fresh flowers in glass.

to contents ↑

Stock footage

Do-it-yourself waterfall on glass in an apartment is not only a fashionable design solution that allows you to transfer a piece of nature to your home. The quiet murmur of water helps to calm down, relax, and put in order thoughts and feelings. Also, during the operation of the waterfall, part of the liquid evaporates, which helps to humidify the air in the room and reduces the formation of dust.