Sewer pipe cleaner - which is better?

Sewerage is one of the most important systems in the house. As long as it functions without failures, they simply do not notice it. But any sewer system malfunction is akin to natural disaster. Clogs that reduce pipe cross-flow or, make you recall the existence of a variety of means that help get rid of obstacles. In case of difficult clogging of pipes, it is advisable to consult a specialist. However, many cope with this problem on their own.

There are several ways to fix a blockage. Sometimes people use plumbing cables or plungers. But most people prefer to choose a chemical agent for cleaning sewer pipes - which is better, we will analyze in this article.

to contents ↑

What is the advantage of "chemistry"?

The benefits of exposure to chemicals include:

• The method is not laborious, but effective.
• A “clean” way to clean pipes. Disassembling the system to remove dirt from the pipes is not necessary.

to contents ↑

Causes of Clogging

Before choosing a tool for cleaning sewer pipes, you need to understand why there was a blockage. This directly affects the preferred solution.

So, the reasons for obstruction of pipes can be as follows:

• Improper use of sewage (dropping rags, large debris, etc.).
• Pollution on the walls of pipes. During the operation of the system on the sewer pipes, accumulations of fat and soap residues gradually accumulate. The cross section gradually decreases, the water begins to leave worse.

Important! To avoid this problem, regular prophylaxis with special means for cleaning sewer pipes is needed.

• Damage to pipes by corrosion. This applies to old houses with cast-iron pipes. Over time, their inner surface becomes rough, various debris lingers on it, as a result of which blockages form.

Important! If the cause of clogging was the physical deterioration of the pipes, then the best way out is to completely replace the system. The use of even the most effective cleaning products gives only a temporary effect.

• Errors made during installation and design. As a rule, there are two problems: the wrong angle of pipe laying or a diameter smaller than required by the norm. No “half measures” will help here: only a complete alteration of the sewage system.

to contents ↑

We deal with the symptoms

When choosing a tool for cleaning pipes from blockages, be sure to think about what is the root cause of an emergency:

• If the water does not leave well due to foreign objects entering the sewage system, then the best way to clean it is mechanical.
• If a mistake was made at the stage of system design, then the only way out is to redo the system so that it complies with the standards.
• The use of chemicals is effective if contaminants stick to the inner walls of the pipes. The drugs dissolve fat and dirt, respectively - the sewerage patency is restored.

to contents ↑

Popular ways to clean the sewer

You can deal with simple blockages with the help of improvised home remedies. The methods of their application are quite effective, and the costs are minimal.

Boiling water

This is the easiest way to deal with blockages. Boil a bucket of water and pour it into the sink.

Important! If the layer of contamination on the walls of the pipes is small, then this treatment will be quite enough.

Soda

Soda and table vinegar are in every home. These substances can be used to eliminate blockages. In this case, you need to do the following:

1. Pour half a pack of soda into the drain hole of the sink.
2. Pour a glass of vinegar into the drain.
3. The chemical reaction that occurs in this way will destroy most of the debris in the pipes.
4. Rinse the pipes with water (just turn on the hot water for this).

Important! Alternative methods help to cope with small blockages. In a more serious situation, you will have to use special chemicals.

to contents ↑

Chemicals for cleaning sewer pipes: which is better

To begin, consider what chemically active substances for cleaning sewer pipes are. Depending on the form of release, the drugs are distinguished:

• Loose (in the form of powder or granules). As a rule, they are packaged in foil bags designed for 1 use.
• Liquid or in gel form. These are safer remedies. Their adverse effect on the pipes is minimal, as they are well washed.

Depending on the type of chemically active substance, there are means:

• Alkaline They dissolve fat well, so they are great for use in kitchens.
• Acidic. It is advisable to use them in bathrooms, since acids dissolve hair and soap deposits well.

to contents ↑

Most popular cleaning products: an overview

Consider the principle of operation of various means for cleaning sewer pipes in more detail.

Mister Muscle

This brand includes a variety of household chemicals: powders for cleaning surfaces, gels, liquid substances. “Mr. Muscle” for cleaning sewers is both prophylactic and powerful drugs that dissolve blockages.

Tyreth

Widely advertised, and therefore quite well-known tool. It is used mainly to eliminate small blockages, as well as as a prophylactic. There are also more powerful drugs on sale, which are used for complete obstruction of the sewer. It has an antibacterial effect. It acts gently without damaging the pipes.

Pothan

A universal substance that is equally well suited for the elimination of collagen, lime and fat deposits. The product is effective, but very concentrated, so extreme care must be taken with it (work only with rubber gloves).

Flop

Granular agent. The “Floop” line includes two drugs: for filling with cold and hot water. It dissolves collagen fibers and food debris well. When working, be sure to wear protective gloves.

Mole

One of the oldest (over 50 years) and most popular means for cleaning pipes from blockages, which has won a good reputation among housewives. “Mole” is produced by several manufacturing companies.

Drugs differ in time of exposure to blockage and in their chemical composition. Therefore, it is very important to carefully read the instructions before use.

Important! The advantage of the “Mole” is that it eliminates pollution without damaging the pipe material. In addition to caustic alkali, the composition of the drug includes chlorine, so the product has an antibacterial effect.

Rowdy

Extremely effective substance that eliminates even the most difficult blockages. The product penetrates the pipe, even if it is filled with water. It copes well with the following types of pollution:

• Fats of plant and animal origin.
• Food leftovers.
• Paper.
• Hair.
• Organic matter

to contents ↑

Basic instructions for chemical cleaning of sewers

Before purchasing this or that drug, carefully read the order of use and the field of application (type of pipes, type of blockages). The general algorithm for using chemicals is as follows:

1. Be sure to take care of security. Open the window, turn on the hood, protect your face with a gauze four-layer mask, and hands with gloves.
2. Decide on the dosage, measure the required amount of funds.
3. Pour liquid or gel into the drain hole. If you use powder or granules, carefully pour them into the drain, pour in after about 0.25-0.5 liters of water.
4. Soak the time (the specific time is indicated in the instructions for the drug).

Important! The opinion that it is better to withstand a greater amount of time is wrong, as this can adversely affect the condition of the pipes.

5. Flush the system with running water by turning on the tap for 10-15 minutes.

to contents ↑

Stock footage

So, now you can clearly answer the question: “Means for cleaning sewer pipes - which is better?”. Get your sewer cleaning products to take into account the possible causes of clogging. Pay attention to factors such as price, percentage of aggressive substances, and usage patterns.