Soda and vinegar for pipe cleaning

Everyone today is used to a certain level of comfort - reliable, well-functioning plumbing, household appliances and other delights of modern equipment in houses and apartments. How high is the surprise when suddenly draining pipes in the sink in the kitchen, in the bathroom, or even worse - in the toilet clogs up. Well, if the water just began to pass, and not all bowel movements and dirt go back to the expensive finish and ourselves. In such a situation, it is not surprising to be confused, especially if you do not know what to do with this disaster.

Do not panic! The solution to any problem is often very simple and convenient. For example, soda and vinegar for cleaning pipes is the best option if you do not have special household chemicals, plumbing cable in your possession or you are not a plumber. How to properly apply these tools, you will now learn from this article.

to contents ↑

Soda and vinegar for pipe cleaning - what's the secret?

Soda is an alkaline salt, and acid is that catalyst, when exposed to soda powder, a violent chemical reaction occurs. It is due to it that pipe cleaning becomes possible.

Why is this happening? Many people know the concept of quenching soda. In the process of interaction of 2 of these ingredients, carbon dioxide is released. As a result, we observe, at a small dosage, hissing and bubble formation. And if you take soda and vinegar to clean the pipes in larger quantities, something like the eruption of a “mini-volcano” will happen. He will fight with your blockage.

Now from theory to practice - how to clean pipes with soda and vinegar? We offer several solutions for different situations.

to contents ↑

What can be cleaned with soda, vinegar?

As a rule, there are some of the most problematic places in the engineering systems of apartments and private houses, which can suddenly plunge you into a light shock with their clogging and the consequences of this phenomenon. These include:

• draining under the sink in the kitchen sink, as fat accumulates there, leftovers from foods, ready meals;
• draining under a sink in the bathroom - hair, fine dust, dirt, even small objects that get tangled up in a single lump when exposed to water and cause poor pipe passage;
• toilet drain - this plumbing is often clogged if you do not follow the rules for its operation, for example, pour there a large amount of berries from under the cooked compote, throw out personal hygiene items.

Important! To less often be puzzled by how to clean pipes with soda and vinegar, set the correct mode for using engineering systems. This is the most important thing you can do for your own comfort, tranquility, comfort in the house.

to contents ↑

We clean the pipes

The principle of using soda and vinegar to clean pipes for different purposes is similar - both substances must be launched inside the system. Some differences will occur only depending on the design features of the drain hole, its diameter.

We clean the toilet

If you need to clean the sewer with soda and vinegar, you will additionally need a plunger.

Important! Depending on what caused the blockage, preparatory work may be necessary. For example, if it is a large object that is within your range, try to remove it. Use protective rubber gloves so that it is not so unpleasant.

In this case, proceed as follows:

1. Pour ½ part of a pack of soda into the drain hole.
2. Pour there ½ cup vinegar.
3. We cover with a plunger - be careful. If the reaction is very violent, all the dirt will come out.
4. As soon as you feel less pressure in the system, flush the toilet with a plunger.
5. Drain the water several times, make sure that it passes well.

Important! In addition, hot water can be added to remove residual impurities on the inner surface of the pipes.

We clean the sink sink

Soda and vinegar for cleaning sink pipes in the bathroom or in the kitchen is an even simpler solution, since the diameter of the pipes is smaller and you don’t have to bother so much when cleaning:

1. Pour ½ packs of soda.
2. Pour ½ tbsp. vinegar.
3. Plug the drain hole with tow, rags or cork - this is necessary so that the reaction takes place inside the piping system. That is, so that carbon dioxide is not released.
4. Wait 15 minutes.
5. Flush plenty of hot water.

Important! If pipe obstruction still remains, try replacing baking soda calcined - she is more caustic and aggressive. But take 2 times less of such a tool so as not to damage the pipes. The principle of application is the same as described.

to contents ↑

Helpful hints:

1. Instead of vinegar or soda, you can use other improvised means that you had available - salt, tartar, to clean the pipes.
2. If a quick reaction does not produce a perfect result, proceed longer. To do this, pour 1 pack of soda in the drain hole of the sink, fill it with 1 liter of boiling water. Close the hole, leave everything in this form for at least 2 hours, preferably at night. Pour vinegar (½ cup), rinse with plenty of water.
3. To prevent clogging of the pipes, periodically disassemble the siphon, removing accumulated dirt and grease from it.

to contents ↑

Stock footage

We hope that now you are more comfortable with blockages in the pipes and you can effectively deal with them using such simple means as soda and vinegar. Let nothing violate your comfort zone in the house and comfort, tranquility and beauty always reign in it!