Sliding door adjustment

To date, sliding wardrobes have significantly squeezed the usual designs on the market, equipped with swing doors. In addition to the aesthetic appearance, this piece of furniture takes up much less space compared to the wardrobe counterpart. A variety of models makes it possible to choose a wardrobe for an interior designed in different styles. In order for all fasteners and accessories to function stably, periodic adjustment of the doors of the wardrobe is necessary. Adjustment minimizes the risk of breakdowns and extends the life of the product. How to do it - you will learn from this article, this work is simple.

Important! The need for debugging does not mean the presence of any defects or defects. Sooner or later, such a need arises for all products. The reason is that when the doors move, a vibration is created, leading to unscrewing or loosening of the fasteners.

to contents ↑

Side edges

During an external examination, it is necessary to assess the condition of the side edges of the doors. It is necessary that they are strictly vertical, parallel to the side racks of the cabinet. In addition, any visible gaps between the side wall and the door leaf of the product are unacceptable. If something like this takes place, the defect must be urgently eliminated. You can achieve the effect by adjusting the bracket with a bolt, which is located near the roller, at the bottom of the door.

When turning the bolt, you can bring the cabinet door to a vertical position:

• Turning clockwise lowers the web.
• When scrolling counterclockwise, the door leaf rises.

Important! For debugging, it is convenient to use a 4 mm hexagonal wrench.

to contents ↑

Abutment Debugging

The need for such adjustment of the doors of the wardrobe arises if the door does not fit snugly against the side pillar. You can restore the correct position of the door by changing the position of the bracket. The bolt must be rotated gradually, all the while checking the correctness of the abutment of the canvas.

If the door has a rail structure, you can adjust the door leaf by lowering or raising the rail strip.

Important! At the end of the work, if the sliding doors of the wardrobe are adjusted correctly, the structure should move silently and without stopping on the move.

to contents ↑

Installation of stoppers

The purpose of the stoppers is to mitigate the impact force of the door sash on the wall of furniture. If the stops are installed correctly, then the vertical edge abuts against the wall.

The installation sequence of the stoppers is as follows:

1. Set the door to the standard position. The size of the lower gap is 5 mm, the sash is adjacent adjacent to the side wall.
2. Put a mark on the lower guide that fixes the position of the middle of the roller.
3. Slide the leaf and screw the stopper to the position that corresponds to the pre-set mark.

Important! With proper installation of the stopper, the roller bumps against it, and the sash is adjacent to the sidewall of the structure. If the roller does not run into the stop, the latter must be moved away from the sidewall. When a gap is formed, the stopper is moved closer to the side wall.

to contents ↑

Helpful hints:

• The moving parts of sliding wardrobes are worn and washed. This is especially true for plastic or rubberized rollers. Regular lubrication with special oils extends the life of the rollers.
• It is impossible to install the sash ideally, since over time, the locking screws weaken under load. But you do not need to abuse debugging, as this is fraught with premature damage to mechanisms.
• Often the problems of installation and installation are associated with uneven floors. Fixing clips at different levels is one of the options for solving this problem.

to contents ↑

Stock footage

If the doors in the wardrobe are correctly adjusted, then the canvas closes without hesitation, extraneous sounds and locks. If there is a backlash, even the slightest, the debugging must be repeated.