DIY pillow tray

The tray is not only a stylish accessory for the interior, but also a pretty practical thing. And if such an item is made by hand, then it, plus everything, becomes an invaluable relic of the whole family. In order not to spend extra money on the store expensive, similar to each other accessories, try to make the original such a little thing with your own hands. Do-it-yourself pillow tray is very simple to use, and you can use it in any situation - both in the living room watching TV, and in the morning “coffee in bed”.

to contents ↑

Pillow tray

Many girls and women have always dreamed of a little luxury called breakfast in bed. With such a useful thing, no food will end up on bedding.

To make such an accessory is quite simple. To work, you need a minimum amount of materials - you can always find them at home or in an inexpensive needlework store.

So, for further work you should prepare:

• An old sofa cushion.
• Classic wooden tray - it should already have sides.
• Velcro tape.

In order to make a tray-pillow with your own hands, you must follow a very simple algorithm:

1. Gently sew the first part of the prepared tape to the pillow.
2. Glue the second part to the tray.
3. Connect the two structural parts.

The pillow tray is made and ready to use!

to contents ↑

Plywood tray

To make a classic tray that is suitable for various events, you need to prepare the following materials and tools:

• Cutting board or plywood.
• Several elongated handles are a piece of furniture, for example, from drawers.
• Drill.
• The drill is the right size.
• Roulette.
• A simple pencil.

So, all the necessary items are collected, now you can get to work:

• Take cooked pens, try them on a board or plywood.
• Mark their future location with a pencil.
• Make symmetrical markings relative to all sides and the center of the board.
• Drill holes for future screws at marked points.

Important! To prevent the board or plywood from being damaged during operation, place a wooden block under it.

• Thoroughly fix the handles in the places that you prepared.

Important! To prevent the screws from sinking too much in the plank, attach the rubber legs to the future tray - they will make it even more elegant and easier to use.

Classic wooden tray is ready! With proper care, he will serve you for many more years.

to contents ↑

Wooden frame tray

In order to make a tray out of a wooden frame, prepare the following materials:

• Beautiful fabric that fits the interior of your home.
• Varnish or paint.
• Brush.
• Vintage pens.
• Suitable photo frame.
• Glass for the frame.
• Hot melt adhesive.

The course of work does not differ in its complexity:

• First of all, you need to process the frame with stain, varnish or paint.

Important! If you have chosen paint, then it is better to give preference to white color.

• Using screws, attach vintage handles to both sides of the future accessory.
• Paint the visible screw caps in the same color as the pens.
• Tighten the back of the frame with a prepared piece of material, fix it with a glue gun.
• Trim the excess fabric, mount this part into the frame and glue in the same way.

Important! The final touch in this paper is to protect the new fabric from all kinds of contamination and wear.For this reason, you need to close the bottom of the finished tray with glass from the frame - it needs to be glued in the same way as the rest of the structure.

to contents ↑

Stock footage

A tray is not only a useful thing in the house, but also an indispensable accessory in the interior. You can buy it in the store, or you can create and subsequently decorate the tray with your own hands. From this article, you learned several ways to make such an assistant, which means you can now do it yourself in the version that interests you the most.