Remaking a sofa into a bed with your own hands

If you show a little creativity, use your own ingenuity, then you can easily solve the problem of small apartments and old uncomfortable furniture. Moreover, you can get an unusual exclusive item. Remaking a sofa into a bed with your own hands is one of such interesting ideas. After all, the truth is, many models are uncomfortable or simply not designed to be used for sleep. Having prepared a small set of tools, you can turn an uncomfortable bed into something more useful and functional. In this article we will give several options for such a wonderful transformation of old furniture.

to contents ↑

What will be required for installation?

If you are tired of your old furniture, you want to turn it into something convenient, interesting, modern, then get down to business. Before you remake a sofa into a bed with your own hands, carefully prepare yourself, it is better to start by collecting everything you need for work.

You will need such materials and tools:

1. Boards. Too thick is better not to take. Be guided by the thickness of the material of which the sofa itself is made. If the frame itself has become unusable, then you will have to purchase quality wood for its restoration.
2. Fiberboard of different thicknesses. It will be needed for the manufacture of shields of both halves and fixing foam rubber.
3. Materials for decorative design. Of course, you can carefully remove the old coating if it is difficult for you to part with it.
4. Thick foam. But if before it was not on the sofa, then when buying fabric you will have to take into account new measurements already taking into account the placement of foam rubber.
5. Door hinges. It is better if they are steel and large enough. If the design of the bed is supposed to be open, then it is better to give preference to decorative options.
6. Screwdriver, drill, electric jigsaw.
7. Stapler.
8. Fasteners.

to contents ↑

How to make a folding bed out of the sofa yourself?

How to convert a sofa into a folding type bed - we will tell further. The work will take you a lot of time, but the result will really surprise you, of course, if you do everything correctly, efficiently, accurately.

You will need to perform the following manipulations in the given sequence:

• First of all, evaluate the already outdated design in order to understand what needs to be replaced. As a rule, the most problems arise with the transverse bars on which the sofa and the folding mechanism are held.
• Free furniture from upholstery and foam. Inspect them thoroughly, if the fabric is still suitable for use, then set it aside, but it is better to throw away the foam, because over the years of operation it has definitely lost its necessary shape.
• Remove the sofa halves separately from each other.
• Now take care of the tree. If the bars have not dried up, then leave them. But taking into account that there should be more supports at the bed, it is necessary to note the required length of the boards, to saw them, similarly to the bars to fasten to the frame.

Important! Make sure that they are at the same level, no stiffeners are felt. Do it with both parts of the sofa.

• Mark the fiberboard - for the bed you will need material with a thickness of at least 10 mm.

Important! Note that the dimensions of the slabs coincide with the sectors of the old sofa, but if you want to make a double bed, then lay the sheet in a continuous frame on an already finished frame.

• If you settled on a folding option, then you have to work with the layout mechanism. As a rule, on old furniture it becomes unusable due to discrepancies between the elements and loose screws. After assessing the condition of the fasteners, put them in order, disassemble and screw them to a new place.
• From the end to the frame of the future bed, beat the board, do the same on the other side, drill new holes for the mechanism and bolts in them. Attach hinges to both sides of the bed to connect them together.
• Check how well the structure opens and closes, then disassemble it again. Re-open the upholstery fabric, considering the thickness of the foam. To do this, glue the required dimensions to the cut fiberboard sheets.
• Prepare the foam in advance. Keep in mind that it is 2-3 mm smaller than the sheet around the perimeter.
• Now individually attach each part of the new bed with screws to the wooden halves. The fasteners should be located exactly on the frame from the side of the foam.
• Check the functionality of the folding. Wrap the halves of the bed with new cloth and secure with a furniture stapler.
• To make the armrests, it is enough to use wooden or metal elements. Only with iron will you have to work more, because it is attached using a grinder or a drill. Wood is less capricious, represents a wider flight of imagination. The material is given the desired shape, on top it is varnished.

As it turned out, remodeling the bed with your own hands from an old worn out sofa does not imply any complex operations, the use of specialized equipment and expensive materials. As a result, you will get an atypical bed, which is quite suitable for sleeping and relaxing.

to contents ↑

How to convert a double bed into a sofa with your own hands?

In this section, we will describe in detail how to remake an old bed with your own hands and get a comfortable sofa for watching TV and meeting guests. It is much easier to do than in the previous version. What tools you need - you already know, then - immediately get down to business.

Perform a few simple steps, following this scheme:

• At the first stage, it is necessary to remove the mattress and determine its middle. Cut the fabric along the entire length, inside you will find springs, small steel springs that connect all the elements together.
• In the second stage, you will need a grinder. Use it to cut the connecting springs, remove them. As a result, the mattress will be divided into two identical parts.
• At the third stage, fabric each half of the future sofa with a fabric.

Important! Make sure that the “insides” do not stick out.

• At the fourth stage, remove the common backs at the head and legs, carefully cut them in half. Then lay on planks, denser to each other. To form the bottom, it is recommended to use the most durable parts of the bed.
• At the fifth stage, put the half of the mattress on the resulting structure, and put the second against the wall to get a comfortable back.

Just so, your old bed has become a comfortable guest sofa!

to contents ↑

Stock footage

Knowing how to remake a bed with your own hands or a sofa, you can update and at your discretion remake all the old furniture in the house. Models can be very diverse, you can increase the bed in a bed or build a special box for storing linen. A good design technique is the installation of a beautiful headboard. Do not limit your imagination, create for your own pleasure! Observing all the recommendations and using useful tips, copying mechanisms, you can qualitatively collect an exclusive thing.