Wallpaper at the junction peeled off - how to fix it?

It would seem that such a simple and uncomplicated job is to glue the wallpaper with your own hands to change the design of the room cheaply and quickly. And it seems that they did everything according to the instructions, but defects appeared, for example, the wallpaper peeled off at the junction. How to fix this situation, why it arose - we will tell you about this in detail in this article. Useful tips will help you adjust everything and carefully tidy the walls in the room, regardless of what type of material you used.

to contents ↑

Why is this happening?

Very often, to those who did the repair, it seems that the work is done soundly, however, the wallpaper can still go away due to a number of important reasons.

Consider the main ones:

• The wall has some kind of defect. Most often, this trouble is found in newly built houses. But in old rooms, the walls can also become deformed over time, so this moment cannot be ruled out. It is better to check all surfaces again before starting the finishing work, than after a few months to observe the peeling of wallpaper.
• Incorrect installation of drywall walls. During installation, it is recommended to pay special attention to the processing of joints between sheets.
• Poor surface preparation. Traces of old wallpaper, dyes or whitewash may remain. Some people neglect the primer of the treated coating, but this can not be done, because priming is an obligatory step in the processing of walls.

Important! Wallpaper can be peeled off at the joints due to the fact that they are glued in a hurry when the prepared surface has not yet completely dried out.

• Failure to follow instructions and rules. More often than not, this is the mistake of professionals, not beginners. It seems to experienced masters that they know everything and begin to do everything in their own way, without considering that each manufacturer has its own characteristics of applying one or another finishing material.
• The glue is applied unevenly. This error is one of the most common. Most often this is due to the fact that the master does not apply the adhesive with a roller, but with a large brush. Thus, in some places a lot of glue thickens, but in some places it is almost absent.

to contents ↑

Rules after sticking

A special place is occupied by the process of drying the surface after gluing the wallpaper. So that they do not go away, pay attention to the fact that the moisture in the room does not evaporate too quickly:

• Be sure to close windows and doors in the first few days.
• Avoid drafts.
• Close the ventilation.
• If your windows face south, cover them. So you limit exposure to direct sunlight.

Important! Wallpaper at the junction peel off or form bubbles, most often due to the fact that the temperature and humidity in the room are high. For this reason, under such conditions it is better not to carry out repairs.

to contents ↑

Competent wallpapering

At first glance, this technology may seem simple. For this reason, they begin to implement it, not taking into account some important nuances and rules.

Even beginners are capable of sticking wallpaper in the room, but provided that they have read and taken into account all the basic recommendations and rules:

• Do not save on finishing materials.This also includes their purchase at a discount - suddenly the price is reduced due to the fact that the quality of the material has deteriorated due to the storage conditions being violated?
• Before the main work, it is strongly recommended that “from” and “to” study the instructions on the wallpaper itself and on the adhesive solution.
• To ensure the quality of your work is at the highest level, purchase special spatulas and rollers on rubber. Always have clean rags on hand.
• Do not save on adhesives, so as not to carry out a long restoration of wallpaper on the wall.
• Primer the surface only according to the instructions.

to contents ↑

Glue the departed wallpaper

If the decorative wall decoration began to fail you, you can fix the problem by following the algorithm below:

• Bend the sheet and use a brush to get rid of primer dust and putty crumbs. The place to be treated must be clean so that the departed sheet can be properly glued.

Important! An indispensable assistant in this matter may be a vacuum cleaner.

• Using a small brush, apply glue to the wall between the joints on the wallpaper.
• Give the glue a couple of minutes so that it absorbs and thickens. If necessary, apply another layer of adhesive.
• Connect the canvas, “pulling” them to each other so that no gaps are formed.
• Glue the canvas.
• If necessary, remove excess composition.
• Leave the treated area to dry without drafts.

to contents ↑

Which glue to choose?

Many owners use PVA glue to solve this problem, but it cannot be called reliable, because after some time the joints can peel off again. How to glue the wallpaper if there is no PVA glue or that glue that is specifically designed for trellis?

Many masters recommend using special glue for wallpaper restoration. Such compositions have a huge number of advantages:

• Quick grip.
• There is no need to breed it - the composition is available in finished form.
• Available in tubes with a dispenser, which is also very convenient.
• In the kit, most often there is a brush.
• Easy to get rid of excess. Simply wipe them with a damp cloth.
• The dried composition is not subjected to soaking, which means that the sheets can no longer leave in these places.
• Suitable for any kind of wallpaper.
• Huge selection.

to contents ↑

Stock footage

Outgoing panels of wallpaper at the joints - this is one of the most unpleasant moments after a recent repair. To avoid such situations, you need to approach the repair with special responsibility and care. From this article, you learned how to glue wallpaper without PVA glue and how to do it correctly. We hope that the restoration of the coating will be more successful than its initial gluing.