At what height should a mirror be hung above a bathroom sink?

Mirrors are delicate and fragile, they can break due to any careless movement. But even to think about how to do without such a beautiful and necessary object every day is impossible. According to psychologists, the mood and well-being of a person directly depends on what height to hang a mirror above the sink in the bathroom. In addition, the shape of the mirror is of considerable importance.

to contents ↑

How to choose a mirror?

Before proceeding with the selection of a new reflective canvas, the dimensions of the room should be taken into account:

• For a small or medium sized bathroom, a medium-sized mirror is required. It must be proportional to the room.
• If the area allows, you can safely experiment. It is possible to install one huge mirror or several smaller ones.

to contents ↑

Cooking surface

Before installing the mirror, the surface is treated with a waterproof chemical and a special anti-fungal fluid. This must be done, as fasteners may suffer due to the negative effects of moisture, and harmful microbes may appear behind the sheet itself.

Important! If in the bathroom after repair there are tanks with alkali, acrylic or sulfur, it is better to put them away. If acrylic paint, plaster or putty gets on the mirror surface, it will be damaged.

to contents ↑

Cooking Tools

To properly mount the mirror, you will need to prepare the following tools:

• Level;
• Tape measure;
• Ruler.

Thanks to these tools, it is possible to select the optimal tilt angle, level and distance between the mirror and the sink.

Important! High-quality installation of a mirror cloth is impossible without a level. If the position of the mirror is not checked, things on the shelves will be unstable, the fasteners will experience an uneven load, which can lead to their destruction.

to contents ↑

How to mount a mirror?

It is important not only to correctly determine the location, but also to know at what height to hang a mirror in the bathroom. The minimum distance between the floor and the lower edge is 120 cm. But still, when choosing a value, it will be necessary to take into account the parameters of all residents.

Important! The height at the top edge of the mirror sheet and the top of the door should match.

It is equally important to know how to properly hang a mirror in the bathroom above the sink. The distance between them should be at least 20 cm. Due to this precaution, water and dirt will not get on the canvas so often.

to contents ↑

Installation methods

When buying a canvas, most often fasteners come with it in the kit. But if you are not satisfied with the factory mount, self-assembly is possible.

Decorative bolts

According to experts, installation with bolts or screws is the most reliable and high-quality.

Important! Remember that screws will always be noticeable.

The main disadvantage is that for such a fastening, additional drilling of holes in the wall will be required, which not everyone will like. In addition, the mirror itself must also be with holes, since it is quite difficult to make them yourself.

Tile adhesive

It is important not only the height of the mirror in the bathroom, but also its appearance - attractive and aesthetic.In the case of using tile glue, the use of bolts, drills and drills is not required. But at the same time, you need to carefully prepare the wall: remove the tile and level it with putty.

We carry out the work as follows:

1. Using a notched trowel, glue is applied to the wall.
2. The mirror is applied and pressed for 15 minutes.
3. When the glue dries, the seams are overwritten.

Important! Pay attention to the glue - it must be special. Otherwise, it may not cope with the effects of moisture and damage the structure of the canvas.

Double-sided waterproof tape

This method is used in emergency cases when places under the mirror are not left or do not want to get rid of the tiles.

Important! Adhesive tape must be resistant to moisture, otherwise the canvas can simply fall off and damage the sink.

We follow the instructions:

1. The surface of the tile is thoroughly cleaned.
2. A protective film is removed from the adhesive tape.
3. The material is glued around the perimeter of the canvas. The stripes should be vertical.
4. The mirror sticks to the wall.

Important! Waterproof tape can be used for medium and small products.

Liquid Nails

This option is suitable for installing paintings of large, custom sizes. Mounting with “liquid nails” is a painstaking method, but its main advantage is reliability and speed of work.

We follow the instructions:

1. We carry out cleaning of irregularities, apply a protective primer with deep impregnation.
2. We paste strips of double-sided tape, which will be required to support the mirror during the polymerization of glue. The distance between them should be 60–70 cm.
3. Remove the protective layer from the tape.
4. Using a gun or putty knife, apply the adhesive.
5. We press the canvas against the wall. From below we install a support that will hold it until it dries.

Important! Completely glue composition dries in a day. The strength of “liquid nails” is commensurate with the strength of dowels.

to contents ↑

Stock footage

The choice of height and method of attachment is a private matter for everyone. Be sure to consider all possible options. If everything is done correctly, then the premises will become even more beautiful and more comfortable.