What skin glue can I use?

Skin bonding is a fairly common operation both in everyday life and in industrial production. This is how it is possible to repair clothes, shoes, car seats, create furniture upholstery or repair it on your own. For bonding, various compositions are used: rubber, polyurethane, perchlorovinyl. For bonding leatherette and leather, polyamide and polyvinyl acetate mixtures are used. Consider which skin glue is best to use.

to contents ↑

Requirements

Regardless of the chemical composition, it is necessary that the adhesive satisfy the following requirements:

• High elasticity.
• Viscosity.
• Heat and moisture resistance.

Important! Sometimes masters use special shoe or rubber compounds. It is advisable to use latex skin glue to connect the leather surface with rubber.

to contents ↑

How to glue the skin? Material Tips:

• Before applying glue to the surface, it must be degreased.
• If there are no special tools, you can use the “Moment” glue. This is a very good adhesive for the skin and suede.
• Leave the surface treated with a bonding agent for a few minutes so that the glue dries out a little, and only then connect it to the untreated part.
• If excess glue sticks to the surface, they must be removed immediately with a soft cloth or cloth until it has time to dry. Otherwise, ugly traces on the surface can not be avoided.
• To better adhere the surfaces, they need to be gently tapped with a hammer or put under the press.

Important! Sometimes, instead of ordinary glue, it is convenient to use an adhesive tape soaked on both sides with an adhesive. It is very convenient if you need to replace the zipper in a leather jacket or stick out the seam allowances.

PVA is often used to glue the skin, which, when dried, turns into a transparent elastic film, waterproof, resistant to mechanical stress, UV radiation and oils.

to contents ↑

Glue for artificial leather

Well suited for bonding Kenda Farben leatherette details. He has proven himself in the repair of shoes, in sewing and furniture production. It provides a strong seam. Due to the elasticity, the joints bend without deformation.

Important! In the tanning industry, the skin is initially stretched on a smooth surface, and only after that they begin to stick together.

to contents ↑

“Liquid skin” - what is it?

The invention of this adhesive for leather products has greatly simplified the independent repair of leather products. With the help of this tool it is possible to mask small damage with high quality and almost imperceptibly. Of course, you need to have certain skills and do the work carefully.

Important! Using this composition, you can easily mask cuts, cigarette marks, and scratches left by animals.

Here are some tips for working with “liquid skin”:

• If you have to repair a product made of thick leather, then the material for repair also needs to be selected tight and elastic.
• Material intended for repair is glued from the wrong side.
• After the glue has dried, apply “liquid skin from the inside out using a foam sponge.

Important! If the skin is thin and the cut is small, the backing is optional.The amount of glue used for genuine leather is minimal.

The procedure for eliminating cigarette burn is as follows:

1. Cut out the substrate.
2. Cut a piece of textile to fit the burn.
3. They impregnate the fabric with “liquid skin” and place it in a damaged place.
4. The last stage is the formation of the facial coating and the cleaning of damaged edges with a fine-grained sandpaper.

to contents ↑

The best glue for leather interior

When hauling the interior of a car, the following mixtures have proven themselves best:

• Kaiflex is one of the most common adhesive types for leather and fabric. The connection is strong, but there is a drawback - an unpleasant odor, which, moreover, is poorly weathered.
• Moment-1. Also a good option. The smell disappears after 8-10 hours after application, while the connection is quite durable.
• Mah. Using this composition, you can glue the skin and plastic. The substance is classified as flammable, therefore, enhanced ventilation of the cabin is mandatory.

As an example, consider the procedure for working with Mah. The algorithm of actions is as follows:

1. Stir the composition thoroughly.
2. Apply glue to the skin with a brush and wait until it is absorbed into the material.
3. For faster drying of the adhesive, you can use an industrial hairdryer.

After the composition has been absorbed into the material, you can proceed directly to the work of hauling!

Important! Do not forget about safety! When working with Mah glue, hands are protected with IER-1 paste. At the end of the work, hands are thoroughly washed and greased with a greasy cream. Protective clothing is required when working!

Adhesive sprays are suitable for bonding soft and flexible materials. They are perfect for gluing carpet, mineral wool or linoleum. The connection is strong, you do not need to spend time on a long fixation.

to contents ↑

How to remove glue from a leather surface?

This is a rather complicated process, the more likely it is that the thing will be damaged due to noticeable traces. Of course, the best option is a neat job, using brushes and other aids. But if you really need them, here are some options:

• Of the anti-glues, Second helps well. It removes glue residue from the surface of leather products, textiles or plastic in just a few hours.
• To remove traces of “Superglue” from the product, “Dimexide”, which can be purchased at a pharmacy, helps a lot. Treat the surface with “Dimexide”, and then rinse the substance with plain water.
• The use of oily cream or liquid soap helps.
• Traces of bonding agent can also be removed using low temperature. In frost or a refrigerator, the glue hardens and can be scraped off without difficulty. There are no traces left.

to contents ↑

Stock footage

In this article we told you about all the features of working with leather material, if you need to glue it. We hope that thanks to this, you did not have any problems during the work.