Which tile grout is better in the bathroom?

Grouting is one of the most important elements when installing tiles in a bathroom. The composition of this material includes many important binding elements that can protect the tile from the appearance of various types of fungus and mold. It also strengthens the tile structure for a long time. You can choose which grout for tiles in the bathroom is better, based on the types and advantages of the material. We will deal with this issue in this article.

to contents ↑

Materials and types of grouts - application features

Trowelling materials are divided into three groups, each of them is popular among consumers and has a lot of advantages and disadvantages.

Cement

Cement - made from Portland cement and various impurities to improve the quality of fixation. This type of material is used for processing shallow seams. If the seams are deeper than 5 mm, then sand is added to the composition. But you need to work with such a mixture very carefully so as not to scratch the tile.

For ease of use and affordability, this mixture will be the most appropriate option if you need to decide which grout for the tile is better.

Important! To increase the elasticity of the material add a plasticizer. It increases moisture resistance and does not allow bacteria to penetrate under the tile.

Epoxy resin

Epoxy - it contains epoxy resin and pigments that give hardness to the material. Such a mixture for mashing can be purchased in special stores. A composition of various shades is available, so you can choose any one you like. If you are looking for which tile grout in the bathroom is better in terms of durability and strength, then this option is beyond any competition.

The main feature of this material is its high viscosity, which is then very difficult to remove excess. To remove the remnants of the epoxy mixture, you must use chemicals. The epoxy mixture is applied using a special bag.

Important! Such compositions require knowledge of the specification of mixing and use of solutions with epoxy components, as well as the mandatory observance of safety conditions, since until the grout hardens, the mixture is a very toxic combination.

Silicone

Silicone grout - is a transparent elastic material, which is most often used with a small amount of work. Sold in special tubes or cartridges. It has several advantages and disadvantages:

• The pluses include ease of use.
• By cons - a short service life.

to contents ↑

Grout for joints - advantages and disadvantages

Since silicone is still more used for sealing plumbing joints - between the bathroom and the wall, between the floor and pipes and for other similar purposes, we will dwell in more detail on the pros and cons of those solutions, which are most often used specifically for grouting joints on tiles.

The advantages of cement grout:

• Very light and easy to use.
• Suitable for mashing joints not only tiles, but also floors.
• A wide range of different shades.
• Strength.
• Acceptable price.

Minuses:

• Seams repeatedly give in to pollution.
• Do not use aggressive chemicals to clean.

Important! Cement grouts are available in powder form.Therefore, it is easier to buy a large bag, pour the right amount, and put away the unnecessary in a distant box. The main thing is to store in a dry place, since cement mixtures are very afraid of moisture.

Advantages of epoxy grout:

• High level of durability.
• Not subject to the appearance of various types of mold and bacteria.
• Moisture resistance.
• Resistance to potent chemicals.

Disadvantages:

• A sophisticated technique for doing the work.
• Pretty high cost.

Important! The epoxy mixture is very popular among grouting specialists for many years. In the epoxy mixture, you can add sparkles that will only decorate the interior of the bathroom. The use of such material guarantees a neat and beautiful result.

After carefully weighing all the pros and cons, it will be much easier for you to choose the best grout for tiles in the bathroom.

to contents ↑

Grouting process

In order to qualitatively fill the seams, you must follow these instructions:

1. We prepare the surface to be treated - we remove pollution (dust) and remove excess tile glue. We also check whether the tile holds tight.
2. Cooking trowel. Cement mixed with water, in the prescribed proportions. If necessary, add sand. Epoxy - mix the “epoxy” with latex and water to a homogeneous consistency.
3. We fill the seams - we place the composition in a special bag and evenly distribute it along the seam.
4. Finishing - gently remove excess material with special cleaners.

to contents ↑

Grout color selection

In order to choose a suitable grout color that is in harmony with all components of the interior, tiles, several rules should be observed:

• If the tile you have chosen is not uniform, then you need to purchase a tool to fill the seams to match the lightest shade on the tile. This is only if the room is small.

Important! Using this selection method, you visually enlarge the room.

• On the contrary, if the room is very large and you want to reduce it, then buy the product in tone to the darkest part of the tile.
• If you have mosaic tiles in your bathroom, then choose a paste of pastel colors (gray, light beige).
• With monophonic tiles, you can experiment by choosing a tool to fill the seams a shade lighter or darker than the tile itself, you can even apply bright contrasting colors.

Important! To fill the seams of floor tiles, it is better to choose a dark color, as light seams get dirty very quickly, require very careful regular care.

to contents ↑

How to make the right choice?

On the shelves of construction stores you can find goods of foreign and domestic manufacturers. In order to simplify the choice of a suitable product, consumers compiled a rating of the best grout for tile in the bathroom:

• Means for mashing “Atlas” - is characterized by high strength.
• “Ceresit” - grout is very convenient to use, detailed instructions for use are attached.
• “Sopro” - is of high quality in accordance with an acceptable cost.
• “Kamrok” is an inexpensive, high-quality construction product.
• “Mapei” - can be used to fill the seams not only in the bathroom, but also in the pools.
• “Litokol” - differs in reliability, durability.

Important! When buying cheap mixtures, it is recommended to add antifungal drugs, compounds that increase moisture resistance.

to contents ↑

Stock footage

Among these manufacturers it is very difficult to choose a decent one, and it is very easy to get confused in the choice. However, products should be selected based on the popularity and relevance of goods of one or another manufacturer. When purchasing, you can seek the help of experienced professionals who will advise and advise on a good product.