How to fix the toilet so that it does not stagger?

Any household item for many years of intensive operation begins to fail, which will certainly affect its functioning. This problem also touched on such a popular plumbing element as the toilet. More often problems arise with its fixation - it begins to stagger, respectively - it becomes inconvenient to use it. Naturally, such issues need to be addressed immediately so as not to run into more serious problems. Today we’ll talk about how to fix the toilet so that it doesn’t stagger on its own.

to contents ↑

Why is the toilet starting to stagger?

How to strengthen the toilet if it sways? Before you figure out what to do if the toilet is crooked, you need to determine why this is happening. There are several reasons:

• Uneven floor.
• Poor installation of plumbing.
• The base of the toilet has irregularities.

We will analyze possible defects in more detail:

• The second option provides for the presence of two types of flooring: concrete or wood. Often, it is on wooden floors that the fixing screws are loosened, and the density of landing inside the wood is lost over time.
• There are frequent situations when cracks appear in the boards directly at the attachment points. This is perhaps the most common cause of loosening the toilet.
• If during the construction of the concrete floor some technologies were violated, then this is guaranteed to entail a violation of the fixation of the plumbing.
• Differences in floor level and unevenness also lead to similar problems. Therefore, you should clearly know how to install a toilet on an uneven tile or cover a different kind.
• As for old apartments, the weakest point in them is a mortgage board laid in concrete. Over time, under the influence of moisture, its properties weaken, and the fixing bolts can no longer hold the device.
• The reasons for the unreliable fastening are also associated with the fasteners themselves. But here the main factor of failure is the poor quality of installation work. If you do not observe the ratio of holes and recesses, then problems will certainly arise soon. Therefore, the marking of fixing points should be taken as seriously as possible.

to contents ↑

How to solve the problem with plumbing plumbing yourself?

How to install a toilet on a tiled, wooden and concrete floor? “Dancing” toilets are quite common. Such trifles, as a rule, infuriate the owners of the apartment from themselves, making their own adjustments to everyday life. They annoy us, annoy us, even bring some to hysteria. Therefore, it is necessary to eliminate such problems promptly. Below we will consider how to solve such issues in cases with wooden, concrete and tiled floors.

Wooden floor

Your toilet is staggering - what if it is on a wooden floor? The answer to this question is very simple! It is enough to slightly shift it and re-tighten the screws, but in a different place. This process is greatly facilitated by the corrugated drain pipe.

Important! Do not even try to tighten the loosened screws more strongly, because this can damage the housing of the plumbing fixture itself. At the new mounting location, it is recommended to drill holes in the wooden boards for perfect fixation.

Concrete floor

Eliminating such problems when it comes to concrete foundations is much more difficult.But anyone can handle this. So, concrete floors with embedded boards are often found in buildings from the time of the existence of the USSR. To resume fastening, you need to perform a few simple manipulations:

1. Wash plumbing thoroughly.
2. Turn off the cold water to the unit.
3. Remove the tank.
4. Remove the drain pipe connecting pipe.
5. Unscrew the fasteners.

Important! Since the toilet bowls are made primarily of fragile materials, extreme care must be taken. The process of repairing the breakdown is simple, it is necessary to completely replace the embedded board, which is a thick lumber. You can get out of the situation in a different way - remove the board, thoroughly clean the recess under it and then concrete it.

Once the concrete has dried, do the following:

1. Install the toilet, mark the points for its attachment.
2. In concrete, make holes with a punch.
3. Fasten the appliance.
4. Replace the drain tank.
5. Plug in the water.
6. Replace the drain.

Having done such a simple job, you will get rid of the problem. Pay maximum attention to the accuracy of marking the holes for placement of dowels.

Ceramic tile (video)

No less common are situations where the toilet is staggering on the tile. What to do in this case we will learn further. The fact is that the device cannot be fixed reliably if serious errors were made even at the stage of laying the tiles. It is perhaps the most difficult to solve such a problem radically, because removing a tile is a rather time-consuming process:

• Experts strongly recommend that you first use the simplest option - use plastic linings, the thickness of which can vary. They will help eliminate backlash.
• If this option is ineffective, then you have to re-shift the tile and install the toilet.

Important! How to install a toilet on an uneven floor? How to fill the gap? Ideal for this is silicone sealant. It is necessary for them to thoroughly smear the entire perimeter of the location of the plumbing and wait about a day for it to completely dry. Thus, you will create a reliable gasket between the appliance and the floor. Then it remains only to put it in place and screw it.

to contents ↑

Stock footage

As you can see, there are many reasons for the problem with a shaky toilet, and accordingly, there are also solutions. In this article, we told you about the most effective methods with which you can restore the reliability of plumbing and use the bathroom with comfort.