How to choose a desk lamp for a student?

Autumn is an exciting and responsible time for parents and children. The child goes to school, and this is not just fun communication with friends, but also quite voluminous homework. Therefore, it is important to properly equip the child's workplace. The correct placement of a desk or computer desk, the choice of an ergonomic chair or chair is important. But today we’ll talk about how to choose a desk lamp for a student. The correct selection of the lamp minimizes the risks associated with the baby's vision. We hope that the tips in this publication will help you with the right choice.

to contents ↑

The best desk lamp for a student - what is it?

In short, the lamp should do its job well and be environmentally friendly. Here is a basic set of tips to help you make your choice.

Bulb power

The maximum lamp power is 100 watts. The choice of light bulb depends on how comfortable the child is:

• If he does not feel any inconvenience with a 60-watt bulb, then leave it.
• If the lighting is insufficient, replace it with 75 watts.

Important! The size of the workplace also matters. If the desk is small, then 75 watts is enough. If the workplace is spacious, then 60-75 watts is enough.

Emission color

It can be cold or warm white, or daylight white. The best option, according to experts, is a warm white color that is as close to natural as possible. As a rule, the power of such lamps is 60 watts.

Shade

When thinking which table lamp is best for a student, carefully consider the choice of the configuration of the ceiling:

• The optimal shape of the lampshade for schoolwork is a trapezoidal longitudinal section: wide at the bottom and narrower at the top.
• It is advisable to choose a ceiling color that is not too bright, since a bright “spot” will be a constant object, distracting from homework.

Important! In addition to the classic green, white and yellow colors are welcomed, with their additional lighting effect.

Shade materials:

• The plastic of which the ceiling is made must be of high quality and not melt when heated.
• We must be careful with metal shades, as they are very hot from light bulbs.

Height

The best height of the lamp is from 30 to 40 cm. If you install the light on a computer table, it is necessary that it is located above the monitor.

Important! It is desirable that the lamp was equipped with a rheostat or dimmer, with which you can adjust the power. Ideally, if the lamp stand is flexible, and its angle of inclination can be changed as necessary.

to contents ↑

We focus on the tastes and safety of the student

So, which lamp is better to buy for a student?

• First of all, it is necessary that the child likes her and is safe. You need to buy exclusively certified products.
• In addition to the certificate, carefully inspect the product itself. Impeccable insulation of wires, serviceability of the plug, integrity of the lampshade are all factors of product safety.
• Do not forget to check the quality of the lampshade. Screw the lamp into the lampshade, turn the lamp on and off.

Important! It is unacceptable if the cartridge turns out with the bulb together. It is better to refrain from such a purchase.

• Today, fluorescent bulbs, the so-called “energy-saving”, are very common.But the light from them is not the best solution for a student. The bluish-white blinking light cannot be called natural. In addition, in production energy saving lamps mercury is used, which, to put it mildly, is not very good for health.

Important! If you want to save energy, buy a LED lamp for your child.

to contents ↑

Useful Tips

Here are some more tips for lighting a school-age child’s workplace and how to choose a desk lamp:

• The light from the bulb should be soft and even. Shadows and highlights are not allowed.
• Light from a table lamp alone is not enough. The inclusion of the upper light is mandatory.
• It is important to make the most of the natural light from the window. It is necessary to constantly keep the window panes clean, not to clutter the window sill with home plants.
• The installation location of the lamp depends on whether the child is right-handed or left-handed. In the first case, the device is installed to its right and, accordingly, vice versa.

Important! If the kid is busy with drawing, modeling or other creativity, it is advisable to put a lamp directly in front of him. It is not permissible for light to fall from behind, otherwise vision problems are guaranteed.

to contents ↑

Stock footage

Now you have the information which lamp to choose for the student. Success in your child’s learning and excellent grades. Let all his homework seem easy and quick to solve!