How in the apartment to get rid of mold on the walls in the apartment?

As you know, in places with high moisture mold often appears, which is the causative agent of many human diseases. Therefore, it cannot be left on the walls, and besides, it spoils the finish and an extremely unpleasant smell with dark spots appears. You need to find out the cause of the appearance of the fungus in order to understand how to get rid of mold on the walls in the apartment. In the apartment it is not difficult to do this - you just need to carefully examine all possible places of education. Then effective methods of struggle will become clear.

to contents ↑

Causes of mold:

1. Most often, the cause of mold is increased humidity in the room and lack of ventilation, because mold is a fungus that loves moisture and grows even more when it is present.
2. Damp homes or too many tropical plants may also be the cause.
3. Very often mold appears in apartments on the ground floor due to the dampness that pulls from the outside and from the basements of the houses.

Mold can be anywhere:

1. In the first place you can put a bathroom, because there is constant moisture.
2. Next we have a toilet, air conditioning filters, voids under the wallpaper in which moisture accumulates and even a refrigerator.

Important! The first sign of moisture is the strong smell of dampness. Then spots of gray and dark colors appear. As soon as you notice a fungus, you need to immediately take on its destruction, otherwise - after a while you will have to do a major overhaul.

So, how to get rid of mold on the walls in the apartment with your own hands, and what means to use to remove it?

to contents ↑

Mold Remover

There are specially designed antibacterial agents to remove these unpleasant parasites that will help us - most often they can be purchased at hardware stores.

Important! It is necessary to adhere to the instructions for their use, because by themselves, they can also be harmful to humans.

Antiseptic Primer

This is a special primer, which treats the surface of the walls from the appearance of mold and other harmful accumulated substances. Before you start using it, clean the place where you found the fungus before it is completely removed. Next, treat the wall with this solution with a paint brush, following the instructions for use from the manufacturers.

Bleach

This method is suitable for well-ventilated areas. Before starting the process, be sure to put gloves on your hands and dilute 1 part bleach with 10 parts water.

Important! When you finish the treatment process, be sure to ventilate the room well.

Table vinegar

Vinegar is a weak acid that can remove many types of mold:

1. You need to put it on the wall with a spray or a regular rag and leave for a couple of hours.
2. Then gently rinse the wall with water and ventilate the room.

Important! For prevention, it is sprayed once a week on the problem area of ​​the wall..

Hydrogen peroxide

Hydrogen peroxide can be purchased at any pharmacy. This is a non-toxic agent that does not need to ventilate rooms. But, nevertheless, it has a whitening effect, like any household bleach, so you need to use it carefully.

Ammonia

This tool very well removes fungus from hard surfaces, but has a bad effect on porous surfaces.

If you need to get rid of mold on the walls in the apartment, and the finishing materials fully meet the requirements:

1. It is necessary to dilute the alcohol in half with water and spray for several hours.
2. Then rinse the treated area with clean water.

Important! Liquid ammonia can cause a headache and an unpleasant feeling in the throat, therefore it is not recommended to be indoors after treatment. Also, you can not mix it with bleach, because when mixed, toxic gas appears.

Baking soda

Take a teaspoon of soda and dilute it with a glass of water, then spray onto the affected area.

Important! Soda can not be washed off, because it is harmless to others and, in addition, protects the wall from the reappearance of mold.

to contents ↑

What needs to be done so that mold does not appear

So that the mold does not appear every time you remove it, you need:

• Lower the humidity level in the room.
• Regularly ventilate the premises in the house and do not allow the air to stagnate.
• Check hoods and air conditioners for proper operation so that they remove excess moisture in a timely manner.
• Arrange furniture so that it does not stand close to the wall.
• Wipe surfaces regularly when condensation occurs.
• Check the heating system before the onset of cold weather.

to contents ↑

Stock footage

These tips will help you avoid mold and help get rid of the fungus on the walls in the apartment and in a private house on your own. We hope you have successfully managed to overcome pests and they no longer create their own colonies in your home.