How to remove mold from wooden surfaces?

Owners of summer country houses often face the problem of the appearance of a fungus on a tree. Mold - harmful formations that actively develop under the influence of constant heat and high humidity. Fungal microorganisms reproduce with the help of spores, of which there are many in the environment. In this article, we will share with you recommendations on how to remove mold from wooden surfaces without losing their aesthetic appeal.

to contents ↑

How to remove mold from a tree?

First of all, wooden surfaces suffer from fungal infections, since organic substances are the most attractive and favorable environment for the development of mold. Under the influence of increased humidity and heat, wood quickly loses its attractiveness, darkens and disappears.

After seeing the first manifestations of the fungus, proceed to urgent methods of disinfection and its removal from the surfaces in the house. To do this, you will need one of the following anti-mildew products on a tree:

• antiseptic substances;
• wood bleach;
• vinegar;
• baking soda;
• hydrogen peroxide;
• drying oil;
• glue;
• ammonia;
• borax;
• tea tree oil.

Important! With the right method of use, each of the listed substances is able to effectively overcome the fungus on wooden surfaces and products.

to contents ↑

Mildew Prevention

Having noticed the appearance of mold in your own home, immediately proceed to eliminate it, because if you start the problem and allow the fungus to eat into the tree, then its elimination will become impossible.

Important! Typically, in manufacturing enterprises, wooden products are processed with special antiseptic compounds during the assembly process. Such a procedure is able to prevent the appearance of mold fungi in principle. However, quite often, when buying wood products, we understand that this stage of their production was ignored.

The appearance of moldy areas on wooden surfaces indicates insufficient dryness in your room, as well as ventilation problems. To prevent their occurrence in the near future you need to ensure the optimal ventilation and humidity conditions. Otherwise, any manipulations will lead only to a short-term result, and the problem will return again.

to contents ↑

How to remove fungus from wood?

To eliminate mold, you can use specially designed antifungal compounds that are sold in every hardware store, among household chemicals.

Important! These funds can be used only if you are not allergic to, because otherwise, significant harm to human health can be caused.

The entire cleaning procedure is carried out in several main stages, which will ensure quick and high-quality achievement of the goals:

Cleaning damaged surface

The elimination of fungal infections should begin with the removal of spores in the most affected areas of the product, namely their stripping. This procedure is performed as follows:

1. Strip the fungus on the tree with the help of improvised tools and tools - a metal brush, knife, chisel, etc.
2. Dispose of the removed particles of wood with a fire, which will not allow spores to further develop and infect the living room.
3. Wash the cleaned area with a soapy solution.

Mold spore removal

To prevent the reappearance of surfaces affected by the fungus, it is necessary not only to clean the affected areas, but also to destroy the spores present in the room. You can do this as follows:

1. At a specialty store, purchase a wood preservative.
2. Prepare the active solution according to the proportions and instructions specified by the manufacturer.
3. Treat not only the affected area, but also a specific area around it.

Important! This method, how to get rid of a fungus on a tree, is best used in non-residential and utility rooms, because the evaporation of chemicals can cause significant harm to health.

to contents ↑

How to remove fungus and mold from wooden surfaces with your own hands?

There are a number of natural and completely safe ways to get rid of mold, which affects wooden products and surfaces:

Method # 1 - Acetic Acid

Vinegar available in every kitchen is a natural and relatively harmless disinfectant. To obtain the most effective result, use the substance as follows:

1. Fill a spray bottle with concentrated acetic acid.
2. Spray liquids on affected areas.
3. Clean the tree with a brush.
4. Re-treat the surfaces and leave them in this position for about an hour.
5. Wipe the surface with a damp cloth.

Method №2 - Hydrogen Peroxide

Hydrogen peroxide is a medical solution that copes well with mold spores and fungal infections. Buy a solution in any pharmacy and use it according to the following algorithm:

1. Evenly distribute 3% hydrogen peroxide solution over the affected area of ​​wood.
2. Leave the surface for 10 minutes to undergo the necessary chemical reactions.
3. Remove all mold traces with a stiff bristle brush.
4. Use a damp cloth to restore the product to its attractive appearance.

Important! Before applying peroxide, check its reaction with the product on a small area of ​​a wooden surface. The highest quality result can be achieved using hydrogen peroxide and vinegar in a single complex.

Method 3 - Baking Soda

This substance is perfect for use as a remedy for fungus on a tree.

Important! In addition to a disinfectant, soda is also an excellent deodorizer, and therefore helps to remove bad odor from mold.

To achieve maximum cleaning efficiency, baking soda is used in the following way:

1. Wet a small valve of clean cloth with water.
2. Soak the cloth in pre-soaked baking soda.
3. Wipe off the moldy wood.
4. Use a brush or a clean cloth to remove any remaining material from the wooden surface.

to contents ↑

Stock footage

In this article, we shared with you quite simple, but effective ways to remove mold and its spores from your premises. The main condition for achieving the desired results is the timely determination of the problem and the proper use of disinfectants.