How to remove mold from a tree

White mold is a harmful fungus that develops in conditions of high humidity and heat. How to remove mold from a tree is a very relevant and reasonable question, especially for those who have a wooden house and who care about its condition and their health. Mold is propagated by spores and there are many in the environment. As soon as the spores of the fungus stumble upon favorable conditions for growth, they become fixed and begin to develop. To cope with such a problem with minimal effort, we have collected all the methods in this article so that you know how and how to remove mold from the tree and prevent its reappearance.

to contents ↑

How to remove mold from wood?

Earlier in Russia, knowing the harmfulness of the fungus and not possessing the necessary knowledge to combat it, houses affected by mold simply burned. Nowadays, there are many effective means of neutralizing this parasite. First you need to understand that the fungus develops where there is increased humidity and there is no optimal air circulation. First of all, wooden surfaces suffer, as it is pure organic and is doubly favorable for mold growth. The tree initially darkens and then quickly disappears.

Given these facts, do not hesitate as soon as you notice the first manifestations of the fungus. Arm yourself immediately with the means that you have available and act! In this fight you will need:

• wood bleaches;
• antiseptics;
• hydrogen peroxide;
• vinegar;
• borax;
• ammonia;
• baking soda;
• tea tree oil or pine oil;
• grapefruit seed extract;
• drying oil or glue.

Note: Any of these remedies can overcome a fungal infection on the body of the tree if used correctly.

to contents ↑

How to remove mold from wood?

You must understand that you can not run the mold. If the fungus deeply eats into a tree, then removing it will not work. Therefore, the sooner you notice mold and begin to act, the better.

Note: Ideally, the tree is treated with antiseptics before assembly, which can prevent mold in principle. If such precautions were ignored, then the likelihood of its occurrence is quite relevant..

When you have mold, it means your house is not dry enough. If you do not provide optimal humidity and aeration system, the remaining manipulations are useless. Take all necessary measures, and you can begin to use special tools - then the fungus will be defeated forever.

If no one is allergic in your home, you can use specially designed antifungal chemicals to remove mold from the tree. In this case, the whole process will consist of several stages:

Stripping the affected area:

1. With a knife, wire brush or special tool, clean the fungus.
2. Burn off the scraped material.
3. Wash the stripping area with a detergent solution.

Processing of a wooden surface against mold spores:

1. Get wood preservatives in specialty stores. In this case, be sure to consult with specialists.
2. Prepare the solution according to the manufacturer's instructions.
3. Treat the affected area and the area around it.

Note: It is advisable to manipulate chemical materials in a non-residential premises, as they degrade air quality.The harmfulness of such fumes is warned by the manufacturers themselves. Therefore, most experts recommend using natural preparations to remove fungus in the house where you currently reside.

to contents ↑

How and how to remove mold from a tree?

There are several natural remedies to combat mold on wood and the same number of ways to use them.

Method 1

Vinegar is a natural disinfectant. Use it and mold is eliminated:

1. Type undiluted vinegar into the spray bottle.
2. Spray on affected areas.
3. Use a brush to clean the tree.
4. Re-spray vinegar to the surface and let it sit for an hour.
5. Wipe clean with a cloth.
6. Finally, wipe with a damp cloth.

Method 2

Perfectly copes with the fungus and its spores, hydrogen peroxide. It has antiviral, antibacterial and antiseptic effects and is absolutely safe for humans. Remove mold from the tree with its help in this way:

1. Pour the required area of ​​the tree with 3% peroxide solution.
2. Leave on for 10 minutes.
3. Walk on the mold with a brush, removing all traces of its life.
4. Use a damp cloth to perfect the look of your woodwork.

Note: before using peroxide, test its effect on a small area of ​​the tree to avoid discoloration. Combine vinegar and hydrogen peroxide to improve results. This union will not leave mold a single chance of survival.

Method 3

Borax has proven itself in the fight against mold. It does not emit substances hazardous to humans. It is used as a herbicide, fungicide and when mixed with water, it has a killer effect on the fungus. When using borax, follow these step-by-step instructions:

1. Armed with a vacuum cleaner with a fine filter and process the available mold. This will prevent spores from entering the air during cleaning.
2. Prepare a solution: for 2 liters of water 1 tbsp. Boers.
3. Use a stiff brush and mortar when processing the fungus.
4. Remove excess moisture with a dry cloth.

Note: It is not necessary to wash off the solution, as remaining on the surface of the tree it should prevent the development of new mold.

Method 4

It is popular as a safe and natural mold cleaner, baking soda. In addition to the fungus itself from the tree, soda removes its smell, as it is a deodorizer. Due to the ability to absorb moisture, this tool prevents the reappearance of the fungus. It is applied as follows:

1. Dampen a piece of cloth with water.
2. Dip it wet in soda.
3. Wipe the moldy place.
4. Remove any remaining product and sprinkle a clean place with soda again to prevent reappearance.

Method 5

Pine and tea tree oil are the most effective natural remedies in the fight against mold. They have antifungal and antibacterial effects, so they are great for solving the problem of how to remove mold from a tree. One drawback is that they are expensive, but a small amount is needed to use them.

Apply as follows:

1. Pour 1st into the spray gun. water and 1 tsp any oil.
2. Spray onto surface and leave.

Note: Since the oil does not evaporate for a long time, its effect will be long. Exactly the same effect on the fungus has grapefruit seed extract. The method of application, as with oils, the only difference is that the extract is odorless.

to contents ↑

How to remove fungus from a tree?

There are two more ways to solve the problem of mold development. Before use, carefully read the instructions for their use.

Solution 1

Drying oil and glue are unexpected helpers in the fight against mold, but they are quite capable of dealing with it. It works like this:

1. Strip the area with the parasite.
2. Dispose of scraped material.
3. Apply glue or varnish to the surface.
4. Leave to dry.

Decision 2

Liquid ammonia, in terms of its effect on mold, is identical to bleach.It is suitable only for non-porous wooden surfaces and is used as follows:

1. Mix equal amounts of ammonia and water in equal amounts.
2. Spray using a spray gun on the affected area.
3. Leave to work for 5-6 hours.
4. Clean the mold with a metal brush or a special tool.
5. Wash off the rest of the fungus and products

Note: never mix or use ammonia with bleach. When mixed, these drugs emit harmful toxic gas!

to contents ↑

Stock footage

As you can see, removing mold from a tree and saving your home is not so difficult. The main thing is to timely identify the fungal lesion zone and competently act on it. We hope that our advice helped you with this.