How to remove condensate from the toilet bowl?

The resulting condensation on the toilet bowl makes life difficult for many owners of comfortable housing. Because of all the time dripping water from the surface of the drain tank, puddles appear on the floor, which must be wiped in a timely manner. If this is not done, dampness can lead to unpleasant consequences.

Of course, you can put some capacity to collect water, and then regularly empty it from the contents. Many hostesses do just that, trying in this simple way to solve the problem. Men still try to figure out and find out the reasons for their occurrence, in order to understand how to remove condensate from the toilet bowl and forget about the problem forever. Are there any effective ways to deal with condensate that periodically appears on the toilet bowl? Let's get it together.

to contents ↑

Causes of condensation in the tank

Often moisture forms on all surfaces exposed to large temperature extremes. The same situation is with the drain tank, which receives cold water through the water supply, quickly cooling its walls, while the room temperature is higher.

Important! In order for condensation to begin to form, a temperature drop of 15 degrees is enough.

The following can cause a significant difference:

• The presence in the bathroom of hot heating pipes.
• Problems in the ventilation system or its absence at all.
• High humidity.
• Damage to the tank, which can lead to a constant leakage of liquid, and the lack of the prescribed amount is replenished with new cold water from the pipeline.
• The water in the tank does not have time to heat up due to the frequent use of the toilet.

Important! Only after you find out the reason for the formation of condensate, you can begin to address the issue of how to remove condensate from the toilet tank.

to contents ↑

What threatens the accumulation of condensate?

Expensive and high-quality sanitary equipment has practically no parts that can be subjected to the destructive force of corrosion. The fasteners that are used to assemble the equipment are made of wear-resistant plastics or stainless metals. Accordingly, problems of the following nature may arise:

• Water droplets appearing on the walls of the drain tank increase the level of air saturation with moisture vapor, which can lead to corrosion on metal parts, with which the tank is fixed. In order to prevent the occurrence of rust, fasteners are recommended to be coated with a layer of anticorrosive grease.

Important! If with the design of the toilet a hinged tank is provided, but not mounted on a shelf, then droplets of condensate will leave not only ugly smudges on the piers, but also create favorable conditions for the appearance of fungus and mold.

• Drops of water can drain to the floor, forming a puddle that can become a hotbed of bad smell. In addition, the liquid, evaporating from there, will cause increased humidity, which, again, can lead to fungal infections.
• The liquid flowing from the walls of the drain tank will inevitably come into contact with the pipes, which will lead to their corrosion.

Important! Rust will begin to appear on all exposed parts of the steel structure, and even on the tank itself if it is made of metal.

to contents ↑

Troubleshooting

So, having figured out the reasons for the formation of condensate, as well as finding out what this can lead to, you can begin to decide how to remove condensate from the toilet bowl.

Solution 1

The first thing to do to fix the problem is to check the condition of the toilet tank. It is easy to determine this, it is enough to observe his work:

• Breakage can be determined by the amount of fluid that is present in the container. Its lack means that the tank is leaking, and in order to compensate for the lack of fluid, the system constantly supplies a stream of cold water, which does not have time to heat up to the required temperature.
• Also, the leakage of water from the tank can be determined by the dark trace left on the plumbing product from the inside.

Important! In order to solve the problem, the tank must be fully inspected, starting with the outlet fittings. However, not having sufficient experience working with plumbing mechanisms, it is better to entrust this matter to a specialist.

Decision 2

A problem with the tank may appear due to frequent use of the toilet. The water that enters the tank, not having time to heat up to the desired temperature, immediately descends and immediately a new portion arrives, with a lower temperature.

The solution to the problem may be the installation of a two-stage button, the principle of which is to keep all the water out. Thus, half of the water remains in the tank, and the incoming rate, mixed with the remainder, will no longer be so cold.

Decision 3

Another effective way to remove condensation from the toilet bowl is to warm the tank. For these purposes, you can use special insulation or improvised means.

From the inside, the tank is glued with heat-insulating material using special glue. This solution will help to separate the thin walls of the tank itself from the incoming cold water.

Important! Before you start gluing the tank, you need to achieve its maximum dryness. If you ignore this, soon the glue will leave the surface, and all work will be reduced to zero.

to contents ↑

Forced ventilation

If all the necessary actions with the toilet bowl have been carried out, but the toilet bowl is sweating anyway - what should I do? It is necessary to think about forced ventilation of the bathroom.

Ventilation problems can be solved like this.

Method 1

Forced ventilation is one of the effective ways that will work even if moisture is collected not only on the tank, but also on all surfaces of the room. The solution to this problem is to buy a fan that is mounted in the circulation hole.

In addition, air circulation can be supplemented by installing grilles on interior doors. Thus, moist air will mix faster with the rest.

Important! It is better to entrust the installation work to professionals who can correctly calculate the necessary (for this particular room) ventilation level. Before starting work, you should make sure that the ventilation ducts are clean and good.

Method 2

Often there are situations where previous tenants close the ventilation hole with some kind of material, and new guests can not pay attention to this.

Important! To give the hole a more aesthetic appearance, it is enough to purchase and install a special grille, which can be found in any of the hardware stores.

Method 3

With a slight manifestation of condensation, you can simply leave the door to the bathroom slightly ajar so that they do not fit tightly into the door frame.

Method 4

A dehumidifier also helps in the fight against condensation. This is the electrical appliance in which the fan is mounted.With it, air flows into the cooling chamber, where moisture is separated and collected in a separate tank, and already dried air is returned back to the room.

to contents ↑

Rise in water temperature

One of the main reasons why the toilet bowl is sweating is the flow of cold liquid into the tank, which does not have time to warm up to room temperature. To solve this problem, you should choose a method when the water in the tank will arrive already warm.

In the summertime at high air temperature the problem may seem insignificant, but in winter the amount of moisture increases. Therefore, it is necessary to understand how to increase the temperature of water:

1. The first thing that can be done is to install a special water heater, with the help of which the water entering the tank will be heated.
2. The second option is the insulation of pipes that supply water. This can be done using thermal insulation material, carefully wrapping them with pipes along the entire length.
3. The pipes that are in the bathroom half overlap, thereby controlling large temperature differences, which means the occurrence of condensate.

to contents ↑

How to avoid condensation?

This problem can be prevented, but it is difficult to say with full confidence that over time the condensate will not appear on the tank. So, prevent the formation of excess moisture on the drain device as follows:

• By installing quality ventilation.
• Having bought a half-drain tank, in which a portion of warm water remains after the drain, which makes it possible to avoid the appearance of condensate.
• Once a quarter or at least every six months doing a ventilation check.
• Correct the malfunction of the drain tank parts in time.

In the event that all of the above measures remain ineffective, it is necessary to replace the old plumbing with a modern plumbing model, where the tank is equipped with a special anti-condensation shell.

Important! If your finances do not allow you to buy new plumbing, and the condensate problem needs an urgent solution, then in a specialized store you can purchase special plastic inserts, after which you can easily upgrade an old toilet.

to contents ↑

Stock footage

In this article we tried to state the main reasons for the fogging of the toilet bowl, as well as to answer in detail the question of how to remove condensate from the toilet bowl. If you still can not eliminate the condensate on your own, then it is better to turn to professionals for help.