How to remove the hettich drawer 🥝 how to remove from the cabinet, video

Telescopic skids are often installed on furniture of modern design. The design is undoubtedly comfortable, but it, like any mechanism, can break. It also happens that some objects rolled behind the box, and it just stops closing normally. The question immediately arises: how to remove the drawer from the rails, since this is not very clear. In fact, this is completely uncomplicated. Furniture experts take a matter of seconds to do this.

to contents ↑

Procedure

Before removing the drawer from telescopic rails, such as a kitchen set, read these instructions:

1. Each drawer is equipped with two guides. Push it as far as possible. You will see plastic mounts in the window.
2. Lower the plastic “antennae” down and pull it towards you to let it out. You need to know that there are different designs - with a symmetrical or mirror arrangement of the "mustache". In the first case, both antennae are pulled down, in the other - one down and the other up. To establish which option is “yours” is possible only by trial and error.
3. Lower these outer “pieces” located on the right and left. Now it's time to pull out the drawer. He leaves the guides without difficulty.
4. To install all the components in place, repeat the entire algorithm, only in reverse order.
5. Insert the drawer into the runners and push until a distinctive click is heard.

to contents ↑

A little bit about the advantages of designs

Despite the fact that sometimes drawers with such accessories can cause problems when they need to be removed or disassembled, they are all nullified by the indisputable advantages of telescopic rails:

• Compared to roller mechanisms - greater reliability and durability.
• The ability to easily and quickly fully extend the drawer or only to the desired depth, which is definitely very convenient.
• The cost of such a system of fittings is an order of magnitude lower than the analogues of the tandem box.

to contents ↑

Stock footage

As you can see, removing the drawer is very simple. Minimum time is required, and the masters saved on the service!