How to remove the toilet lid?

The toilet flush mechanism is not particularly difficult, but to carry out repairs, you must at least have access to the inside of the tank. And here, a problem may arise: when you try to open the tank, you find that the lid is holding something. If attempts to open the drain tank are unsuccessful, read this article. You will learn how to remove the toilet lid without much difficulty.

to contents ↑

When do I need to open the tank?

The most common problem that makes the owner interested in the inside of the toilet tank is the continuous flow of water into the toilet. By the way, if you do not notice the problem in time, this is fraught with large water leaks and considerable costs for its payment.

The reasons for this phenomenon may be 2:

• Water is discharged into the overflow hole. It is possible that the gasket is out of order or dirty, and it overlaps the cross section of the crane. It also happens that the float “drowns” due to the ingress of water into it or it wedges in one position.
• If the water level is below the overflow, the problem is in the drain mechanism. It may be necessary to replace the gasket or “bulb” with new ones.

Important! It is necessary to open the container even when it is not possible to drain the water. This problem arises from misalignment of the drain mechanism parts or their disengagement.

to contents ↑

How to open the drain tank?

Tanks of an old design with a ball open very simply. It is enough to unscrew the ball, and the lid can be removed without difficulty. In about the same way, containers with a rod of plastic are opened, which it is supposed to press to drain the water. The cap is also not fixed on the “classic” tank with a lever located on the side and chain.

As for modern models, where the drain mechanism operates at the touch of a button, their owners will have to “sweat” a little. So how to remove the toilet lid with a button? The secret is that the cover is fixed with a special latch. To open it, you need to know a few tricks, which will now be discussed:

• Before removing the toilet lid with a button, prepare the tools. These are ordinary pliers and a flat-blade screwdriver.
• Look at the button. You will see a shiny ring. This is the sleeve that will need to be unscrewed.
• Hook the sleeve with a flat screwdriver and turn it counterclockwise.

Important! The operation itself is not difficult, but care must be taken not to scratch the cover and damage the sleeve (as a rule, it is made of plastic).

• After the sleeve has moved, you will have no questions how to open the toilet bowl with a button. The part is beautifully unscrewed by hand.
• After the sleeve has been removed, you will be able to slightly raise the cover. Raising it, set it at right angles to the original position, that is, across the tank. Now you have access to the latch, which prevents the tank cover from opening freely.
• The latch loosens very easily, and then the container itself opens quite easily.

Important! Naturally, it is necessary to first shut off the water supply to the tank, and empty the tank itself.

If the water was drained immediately after you lifted the cover, then the push-button assembly and the drain valve are interconnected using a chain. To repair the mechanism was more convenient, it is advisable to remove the chain. But at the same time you need to remember exactly where it was attached.Otherwise, you will have to spend additional time adjusting the drain device.

to contents ↑

How to remove the lid from the toilet bowl with a double button?

Sometimes a button is assembled from two semicircular halves. The algorithm for opening the tank is somewhat different:

1. Drown one half. In this case, a groove is visible on the side surface of the second half of the button.
2. Insert a screwdriver into the groove, remove half the button. Remove the other half in the same way.
3. A slotted screw is visible in the hole that forms after removing the button. Unscrew it.
4. The further procedure is the same as in the case of a single button: lift the cover, rotate it 90 degrees, etc.

to contents ↑

Useful Tips

When repairing, you must follow the safety rules:

• The lid must be handled very carefully, because the porcelain or earthenware from which it is made is very fragile.
• It is advisable to take it out of the toilet, placing it on a stable horizontal surface, without access for children and pets.

to contents ↑

Stock footage

After the repair is made and you are convinced of the serviceability of the device, reassemble the tank in the reverse order. Knowing how to remove the lid from the toilet bowl with a button, you can repair the plumbing yourself, without resorting to specialists.