How to glue a mirror to the cabinet door?

Many are interested in how to glue a mirror to the cabinet door? It is such an element that can transform the interior, make the atmosphere more comfortable and spectacular. At the same time, you can choose a piece of furniture immediately with a mirror. But it will cost unambiguously more expensive, and the form, its dimensions may not quite meet expectations. Therefore, the issue of self-installation of mirrors on cabinet doors remains relevant.

to contents ↑

We choose methods and means

There are 2 ways to stick them on furniture:

• Using double-sided tape.
• On silicone.

Experts recommend buying mirrored products reinforced with a special protective film on the back. Such a surface, even if broken, does not crumble into fragments. The probability of injury is minimal.

Important! It is undesirable to use “liquid nails” and other adhesives reminiscent of “Moment” glue by smell for gluing. These formulations contain substances that can damage the amalgam.

So how to fix the mirror to the cabinet door?

to contents ↑

Glass bonding algorithm using double-sided tape:

1. Stick the adhesive tape around the perimeter of the glass on the back.
2. At regular intervals, stick additional strips of tape.
3. Before sticking a mirror product to the furniture surface, mark with a pencil the place where it will be. After that, you can stick.

Important! Do not use this method for large products. There is a chance that the adhesive tape will come off and the glass will break. Especially this risk increases in the summer heat.

to contents ↑

How to glue a mirror on a cabinet: using silicone

Compared to the method described above, this one is more reliable. If you choose how to glue the mirror to the cabinet, give preference to this particular method. The procedure in this case is as follows:

• Remove the door from the furniture, lay it on a horizontal surface.
• Mark the place where the product will be attached.
• Wipe the surface of the door and the glass on the back with solvent. It is necessary for degreasing. It is advisable to use textiles that do not leave fibers or threads.

Important! Before applying the adhesive, wait a while until the degreasing agent evaporates completely.

• The best option for gluing is building colorless silicone.
• Apply silicone glue for the mirror to the cabinet on the back of the mirror. Make sure that it does not get on clothing or the front of the product. No need to lubricate the entire surface with silicone. Apply it in strips at regular intervals.
• Set the longest edge of the product along a pre-marked line. Lower the product so that it does not move relative to the marking lines. For this reason, it is advisable to carry out the work of fixing the mirror to the cabinet door together: one - carefully puts the glass, and the other - controls that it adheres within the marking lines.
• Before you hang the door back, wait until the silicone dries.

Important! While the bonding agent is not frozen, it is possible to slightly shift the surface in the right direction.

to contents ↑

The use of metal legs or stops made of plastic

In this case, as in the described embodiments, the glass is attached to the door, previously removed from the hinges and located horizontally. If you are using metal tabs, first check their height so that the tabs provide a snug fit between the glass and the furniture. If necessary, use foot pads. After you screwed them according to the marking, install the glass and squeeze the tabs. Done!

to contents ↑

Stock footage

Now you know what to glue the mirror on the cabinet. The work is not too complicated, but requires accuracy and accuracy.