How to disconnect the washing machine from the water supply?

The washing machine can be attributed to the number of “stationary” items of household appliances. Moving from place to place, this bulky unit has, frankly, rarely. Install a “washer” in the bathroom or in the kitchen. However, there are times when the washing machine needs to be pushed. For example, when moving to a new apartment, it must be disconnected not only from electric power, but also from hoses for supplying and draining water. Let's consider how to disconnect the washing machine from the water supply in order to prepare the “washing machine” for moving in accordance with all the rules.

to contents ↑

The algorithm for turning off the washing machine:

• The first thing to do is to shut off the water supply. Typically, water valves are located behind the machine and mounted on the wall. Turn the valve fully clockwise. Now, even if the hose is damaged, you will be able to avoid water leaks.
• Move the machine away from the wall. It is important not to overdo it. The travel distance must be such that there is no excessive tension on the hoses. It’s enough that you can freely go over the “washer”.
• Disconnect the unit from the power supply. Of course, you must first make sure that the machine is not “busy” with washing clothes. This step is the easiest. It is enough to pull the plug out of the socket.
• Place a bucket or basin in the back of the machine. This is to ensure that water does not leak onto the floor. It is advisable to put a few rags or towels around the machine, since when disconnecting the hoses, water can overflow and splash.
• Disconnect the hoses from the washing machine. If the hoses are secured with clamps, then rotate the clamp counterclockwise until the clamp becomes noticeably weaker. Now it remains to direct the hose into a bucket or basin and pour water.

Important! Remember to check once again that the water supply is turned off. If the valve scrolls easily, you may inadvertently turn on the water supply.

After closing the valve, wait a few seconds. It is much easier to disconnect the hoses after the pressure in them has returned to normal.

• Disconnect the hoses from the wall. To do this, they must be scrolled counterclockwise until they are completely disconnected. If this is difficult, use pliers. After the hose is completely disconnected, the remaining water must be drained into a bucket.
• Disconnect the drain hose from the sewer inlet. The free end of the hose must be directed into a bucket and drained of water. After the fixing screws are unscrewed, it remains to drain the water that is in the hose into a bucket.

Important! If you notice that the old hoses are cracked from continuous use, remove them and replace with new ones.

to contents ↑

Washing machine moving order

So, you know how to turn off the washing machine, and quite successfully coped with this work. The unit is disconnected from the power supply and the connecting hoses. Now a few words about how to move the car from place to place:

• Pour water from a bucket, wipe off spilled water around the machine.
• Check again that all hoses and cords are disconnected from the machine.
• Once you have access to the drain pipes, carefully clean them with a brush. Now that the machine is disconnected from the water drain, this is the time.After this, the holes from the hoses must be closed with plugs.
• Unplug the power cord. If you can’t remove it, then you need to attach it to the machine using tape.
• It is advisable to remove and pack separately all the handles of the unit so as not to accidentally lose them during the move.
• The next step is to fix the drum. This will avoid damage and skew during transportation. They fix the drum with special bolts, a piece of foam rubber or by fixing the screws located at the rear of the unit.
• Packaging of disconnected spare parts. As packaging material, it is desirable to use a special wrapping paper, air bubble film or ordinary towel. It is advisable to transport parts inside the machine, which will protect them from damage.

Important! If you are not going to move immediately, let the machine dry a little after the hoses have been disconnected - stand it for a day or two with the door open. When transporting the device, this can play a decisive role. If water accidentally gets on the control module, then when you turn on the machine may fail.

to contents ↑

How to turn off the washing machine during washing?

The program in an automatic washing machine is designed for one or another operating time. In addition, if the machine is running, the door will lock automatically. But sometimes it is necessary to stop the device, as they say, “halfway”. Consider how you can stop the washing machine directly during washing.

Quick Wash Finish

Most often, you need to quickly complete the wash if you are convinced that there are unwanted objects in the drum. Or vice versa, you have found some forgotten things that need to be washed at all costs. You can stop the unit in several ways.

Pressing the “Start-Pause” Button

When you press the button once, the washing program pauses. Now wait for the door lock to unlock. Open the door and perform the necessary actions (for example, report the forgotten linen).

Important! Before opening the machine door, make sure that the water is lower than the level of the loading door. Otherwise, water will spill out, flooding the floor in the bathroom or in the kitchen. Neighbors a floor below will also have a hard time. if the water level is too high, it will need to be drained first.

Stop washing program

To do this, just press and hold the start button for a few seconds. The specified program will stop running. Further, one of two options is possible:

• The machine unlocks the door without draining the water.
• There is a complete drain of water with unlocking the door.

How to act:

• If the water does not drain, you can activate the corresponding program and achieve complete removal of water from the tank.
• If the washing machine program has stopped due to a power outage, then with the resumption of electricity supply, the washing program will start from the moment it stops.

Important! Unfortunately, this property is not available on all models of washing machines. Some devices “memorize” the program execution stage for only a few minutes, after which the program stops completely.

The car “hung”

A rather unpleasant moment when the device stops responding to control commands. In this case, there are usually no problems with how to turn off the washing machine. It helps disconnect the washing machine from the network for 15 minutes, which makes it possible to reset the program, which is frozen. After that, the equipment will begin to function normally.

Important! If after restarting the machine does not work, you will have to consult a specialist.

The washing machine is off - how to drain the water?

To avoid a flood in the bathroom or in the kitchen, you can drain the water through a filter. It is located in the lower front of the unit, behind the hinged door.The best option is to use the drain or spin mode to remove water. Only five to ten minutes, and the tank will be completely empty.

to contents ↑

Stock footage

Knowing how to disconnect the washing machine from the water supply or to suspend a given washing program, you can avoid many problems associated with the operation of this unit. We hope that you have managed with simple efforts, following the advice from this article, which means that unplanned expenses for the purchase of new equipment do not threaten you.