How to iron a leather jacket at home?

Many fashionistas who prefer leather products are wondering: how to iron a leather jacket at home? A leather jacket remains fashionable for a long time, not surprising, because it is combined with almost any type of clothing. The most important reason that wrinkles and ugly bends form on a leather product is improper storage of the item. This article will outline the main ways that will help girls smooth out this piece of clothing.

to contents ↑

Method 1

The easiest and at the same time the longest way to smooth the jacket is to simply give it the opportunity to hang on the hanger and iron itself.

The following points should be considered:

• A feature of this method is that you need to correctly select the shoulders on which the product will be hung - they must match the width of the shoulders of the jacket itself. Otherwise, deformation of the leather product is possible.
• The smoothing time depends on the nature of the skin - you can remove the folds on a leather jacket from soft material in about 2-3 days, from hard - in a few weeks.
• To achieve a similar effect, you can just put on a thing and look like it for some time. So the jacket takes on the shape of your figure.

Important! This method is only suitable for getting rid of small folds.

to contents ↑

Method 2

You can smooth a leather jacket by steaming it in the following ways:

• Using water.
• Using an iron.

Steaming with water

The first method cannot be called very difficult. Before steaming a leather jacket at home, you need to prepare a large container (preferably a whole bath) and a large amount of hot water.

This method is very effective, and therefore it is often used in everyday life. To implement it, you need to follow this algorithm:

• Hang the jacket on the right shoulders.
• Hang the jacket over the container.
• Draw a large amount of very hot water into the container.
• Leave the jacket in this position for half an hour.

Important! During steaming, wipe the product with a clean, dry cloth - this is necessary in order to get rid of unnecessary moisture and not to spoil the material.

• Hang the item in a dry, well-ventilated area.

Steam ironing with steam generator

Steaming a leather jacket at home is also not difficult. To do this, you just need to direct the device to problem areas, without bringing it to the product closer than 10 cm.

The advantage of this method is that it is great for jackets that are partially dented in some places. In this case, it is not necessary to process the entire jacket.

Important! Before steaming the product in one way or another, you need to familiarize yourself with the icons on its tag.

to contents ↑

Method 3

It would seem that you can smooth out a leather coat at home using an iron, and not waste time on other methods. But here everything is not as simple as it seems at first glance. You can resort to this method only in those cases when you are sure that the thing will not be damaged.

Below are some helpful suggestions for this procedure:

• The skin is ironed only on the wrong side.
• It is better to use a dense lining so as not to spoil the product completely.
• Ironing should occur if the temperature of the iron is low.
• It is necessary to carry out slightly pressing movements with an iron.
• Do not use steam during the procedure.
• It is better to iron difficult places (for example, a collar, decor or sleeves) on a small ironing board - it usually comes with the main board.
• Ironing is possible on the front side, however, one must be extremely careful here, since the jacket can be completely ruined.

Important! You can iron a leather jacket with the condition that there are no spots on it. Before the procedure, they need to be disposed of, since contamination can enter the skin and it will be impossible to remove.

to contents ↑

Method 4

A leather product can be smoothed using peanut butter only. In this way, few people use it - this is due to the fact that walnut oil is difficult to find, plus everything, it is quite expensive.

Important! Walnut oil can be replaced with glycerin or petroleum jelly.

The procedure is as follows:

1. Before smoothing the product, make sure that there are no contaminants on it. If there is, they must be disposed of without fail.
2. Moisten a cotton pad in oil.
3. Handle a piece of clothing with them, paying particular attention to folds.
4. Repeat this procedure 4 times, observing the breaks.
5. Hang the garment on a hanger and leave it hanging in a well-ventilated area for 4-6 hours until the oil is absorbed.

to contents ↑

Method 5

You can smooth out a leather jacket at home after purchase using a press. In this way, it is better to use when straightening imitation leather garments.

The following items can play the role of the press:

• Heavy books.
• Large containers with water.
• Bricks wrapped in cloth.

In order for the procedure to succeed, you must follow the algorithm that will be given below:

1. To straighten a jacket on the equal horizontal plane.
2. Align the lining.
3. Put your press on her.
4. Make sure that no new bends form in this place.
5. Leave the garment in this position overnight.
6. Hang it on a hanger and leave it for a day.

to contents ↑

How to store a leather jacket?

In order not to wonder further how to iron a leather jacket at home, it is necessary to observe the following rules for storing leather items:

• Jackets should hang in the closet on the right shoulders. Folding them is not recommended.
• If the item is wet in the rain, it needs to be dried soon.
• The closet in which the garment hangs should be free.
• Keep the leather case in a special case.
• The air in the house in which the product is located should be regularly ventilated.

to contents ↑

Stock footage

So that unpleasant folds and creases do not form on such a capricious piece of clothing, it is necessary to observe the basic rules for its storage. From this article, you learned about these rules, as well as how to remove wrinkles on a leather jacket without contacting special services. Use these tips so as not to waste time on unnecessary measures to level the material when you need to put on a thing.