How to clean the toilet from urinary stone at home?

It's nice when the plumbing in the house shines clean, and according to the rules of hygiene, just in good shape, the bathroom should be sterile. But sometimes the toilet is covered with a brown coating, and then the question arises: how to clean the toilet from urinary stone at home and return it to perfect whiteness? In the article, we will explain why plaque and rust are formed in the tank and on the toilet, and what means to use to combat pollution.

to contents ↑

Why does a plaque form?

To understand how to solve the problem, which drugs to use, you must first find out the type of pollution, the cause of its appearance.

The main enemies of the whiteness of the toilet:

• Urinary stone.
• Rust.
• Limescale coating.

Get to know your enemies better.

Urine stone

The main enemy that is very difficult to get rid of is urinary stone. Usually it accumulates in the lower part of the toilet - where water always stands. Urine stone consists of complex mineral salts that enter the toilet with urine. The problem with deposits of brown color occurs in families where households often forget to flush after themselves or if the toilet itself is rarely subjected to preventive treatment.

Settling on the walls of plumbing, salt deposits turn into a rather thick layer of brown. Due to such deposits, the diameter of the drain may even decrease. Therefore, ideally, it is necessary to fight with urine stone as it is formed, and not wait until it becomes “impenetrable”, because then, ordinary chemical agents can no longer cope with it.

Rust

The appearance of rusty drips is associated with the quality of water, the condition of the metal parts of the pipe, and the drain tank. Old rusty plumbing water pipes can also affect the quality of water entering the drain. In addition, if the rubber gaskets do not completely block the drain, and the metal parts used are of poor quality, then the rust formed on them will gravity seep from the tank into the toilet bowl and form an unaesthetic rusty strip.

Limescale

Such a pollutant is less common, as it is found in homes with increased hardness of water containing calcium salts. The higher the hardness of the water, the faster the formation of plaque. Calcium salts, over time, settle in the tank and on the toilet, and other contaminants quickly form on top of the limescale. To get rid of limescale helps funds containing in its basis acid.

to contents ↑

How to avoid serious pollution?

It is easier to deal with different types of pollution at the appearance stage. In order not to look for how to clean the toilet from rust and plaque with your own hands, follow simple preventative measures:

1. Repair leaks from the toilet bowl. Sometimes it’s enough to adjust the float and the toilet will not overflow, and traces of rust will not settle on its walls.
2. Get pills for a drain tank. Drugs, although slowly, but still prevent the deposition of salts. In addition, the tablets give the water a pleasant smell, color, help dissolve already formed plaque.
3. Use different filters to improve water quality.
4. Make sure that no mechanical damage forms on the surface of the toilet bowl. A porous, rough surface accelerates the formation of deposits. Do not use metal brushes or coarse abrasive products to clean the toilet bowl, cistern. In addition, hot water cannot be poured into the toilet, since microcracks form on the surface of the plumbing under such an impact.
5. Do not forget to clean the plumbing, at least once a week. Apply a cleaner, after half an hour wipe with a brush and rinse.

to contents ↑

How to clean a toilet bowl before Bela at home?

Before solving the problem of how to clean the toilet from urinary stone at home, decide whether it’s worth the effort that you intend to spend on cleaning plumbing. If it’s very old, it’s easier to buy a new one, especially if the thicket has already served its last millennium.

If the ceramic “participant in the process” is dear to you as a memory or if you don’t have the opportunity to buy a new one, then get down to business and buy a toilet cleaner for your toilet yourself. As in all cases, methods for solving any problem are divided into gentle and radical. We will introduce you to household cleaning products that will help remove urinary stone in the toilet.

What can household chemicals offer?

The industry offers a huge number of solutions and powders. All drugs can be divided into four main groups, each of which has its own effect and, to one degree or another, allows you to clean the toilet of urine stone at home.

Abrasive cleaning powders

An example of such a tool may be Pemolux. The cleaning principle is quite simple. Your actions:

1. Wear rubber gloves.
2. Scoop out all the water from the tank and toilet bowl.
3. Put the product on the surface of the plumbing.
4. Using a soft sponge or rag, wipe off dirt until a snow-white surface appears.

Important! With frequent use of the powder, micro-scratches may appear on the surface of the plumbing, and the surface will become rough. Therefore, give preference to gels and cream formulations. In addition, they are more economical and easy to use.

Alkaline products

Liquid preparations contain caustic soda. They dissolve the urinary stone and rid the surface of plumbing from pollution. The drugs are well disinfected, do not damage the plumbing coating. Alkaline preparations perfectly dissolve fats, which allows you to remove blockages of organic origin.

To clean the toilet with alkali, proceed as follows:

1. Scoop out water from the toilet bowl and cistern.
2. Apply the product on the surface of the plumbing.
3. Leave the bathroom for half an hour.
4. Rinse off any residue left over with water.
5. Repeat the procedure if necessary.

Important! Keep in mind that such products have a rather pungent and specific smell, and also do not affect the skin in the best way. Therefore, be sure to use protective equipment - gloves, a mask, glasses. Otherwise, you will be able to clean the toilet of urinary stone at home, but in return you will get health problems.

Chlorine Based Products

Suitable for daily care, perfectly cleaned, disinfected, do not corrode the coating, do not form microcracks. On sale are present in the form of a concentrated solution and powder.

Preparations perfectly remove odors, but leave a smell of chlorine after themselves.

Important! The most popular product with such formulations is the familiar “White”, which will cost inexpensively, which is a definite plus.

Acidic Cleaners

These chemicals will defeat the most old deposits of urinary stone and rust. They are used in the same way as alkaline products. However, it is often not recommended to use acidic preparations, since they contain aggressive substances: oxalic, hydrochloric, formic, orthophosphoric acids and their mixtures, which can corrode the coating to some extent. And pairs of acids have a very bad effect on human health.

As an example, the leaders of the acid group are Sillit and Domestos. Available in convenient plastic bottles. The curved nose of the container allows you to apply the product directly under the rim of the toilet bowl.

to contents ↑

How to whiten the toilet at home folk remedies?

Our mothers and grandmothers had to deal with the problem of hygiene in the bathroom long before the appearance of special household chemicals. Our ancestors knew how to clean a toilet bowl from urinary stone with improvised means at home.

We offer you to use their recipes:

1. Heat a glass of 9% vinegar to 40 degrees and pour it into an empty toilet bowl for several hours. This method is able to remove a significant part of the stone and limescale. To enhance the effect, add a little iodine, salt or soda (1 tbsp.spoon of soda to a glass of vinegar). Perform all cleaning procedures in the evening to leave the solution overnight. Urinary stone will become soft, supple, respectively - it can easily be removed.
2. Acetic essence with a concentration of 70% will also solve the problem. Pump out all the water from the toilet, fill the resulting void with essence. Leave the plumbing for 1.5-2 hours. To enhance the effect, add a solution of iodine to vinegar, in a 1: 1 ratio. After the cleaning procedure, wipe the surface with a brush.
3. Citric acid is a good alternative to vinegar. Pour two or three tablespoons of acid into an empty toilet bowl and cistern. Leave the product for several hours. Brush and rinse. Repeat the procedure several times until you have completely flushed the toilet bowl of urinary stone.
4. Soda is capable of not only enhancing the action of acetic acid, but also copes with pollution perfectly. Put a whole pack of soda in the toilet at night and leave it until morning. When you wake up, lightly brush the surface of the plumbing with a brush and rinse off any remaining dirt.
5. "Coca Cola". This folk recipe was born recently. Pour 1-1.5 liters of liquid into a dry toilet bowl and leave overnight. Soda will quickly corrode deposits.

We use "heavy artillery"

If all the attempts made did not give the expected effect, then use strict measures to clean the toilet from the urinary stone:

1. Dry oxalic acid. This tool is used in the chemical industry. Acid is used to etch the surface before applying enamel. Sold in powder form. Put the product on a piece of cloth and wipe the coating. You can use another way: dissolve a fair amount of the product directly in the toilet. Wash off the acid after use and brush the surface with a brush. Remember that when using acid, you must adhere to safety measures.
2. Hydrochloric acid. The tool is sold in plumbing stores. Use acid to clean water heaters in columns and gas boilers. Pour liquid into the toilet bowl, and rinse after 0.5-1 hours. Disadvantage: can not be used if the sewer pipes are made of plastic.
3. Iodine Chloride The liquid can be purchased at veterinary pharmacies. Pour all contaminated areas with a solution and rinse immediately with water. Liquid means perfectly removes all types of stone, and lime deposits and rust corrodes within a few minutes. Disadvantage: can not be used in houses with cast-iron sewer pipes. In addition, monochloride iodine is aggressive to aluminum.
4. Electrolyte for acid batteries. The tool will get rid of all hard-to-remove unwanted deposits quickly and effectively. Apply electrolyte for half an hour or an hour and rinse with water. Disadvantage: you need to use it very carefully with the use of protective equipment, can not be used in houses and apartments with plastic pipes.

Important! When working with chemicals, use rubber gloves, a protective gown and a respirator. Do not close the door to the toilet during processing. After cleaning, rinse the plumbing thoroughly and ventilate the room well.

to contents ↑

Useful Tips:

1. Do not use strong agents too often, as they spoil the coating and leave microdamages on the surface. Once, having firmly removed the urinary stone and limescale, regularly carry out preventive measures using more gentle cleaners.
2. Before cleaning, be sure to empty the toilet bowl. Scoop out water in a plastic container and remove any remaining moisture with a rag.
3. In addition to preventative cleaning and anti-scale deposits, be sure to adjust the water supply to the tank. Excess water for flushing is not only economically unprofitable, but is also one of the causes of limescale. The easiest way to reduce the amount of water supplied is to place 1-2 plastic water containers in the tank. Savings: 2-3 liters with each use. In the case of acquiring new plumbing, choose a tank with a double button and the function of economical use of water.

to contents ↑

Stock footage

When answering the question of how to clean the toilet, the choice of tools and methods always remains with the user, because it is necessary to take into account not only the features of the plumbing device, but also the type of material, the degree of contamination and the presence of microcracks and damage. If deposits have appeared recently, then resorting to radical methods is not worth it - start with folk, proven means, because you can clean the toilet with vinegar if its smell does not irritate you. We hope that the information received will help you keep the plumbing in perfect cleanliness.