How to clean the pan from soot?

Each housewife simply dreams of quickly and without physical effort to clean the pan from soot. But few people know that this is not only an aesthetic problem, but also a threat to health. When heated, carbon deposits release carcinogens, which, to put it mildly, are not good for health - they significantly increase the risk of cancer. This is just one of the reasons why you should not “run” your dishes. But if this has already happened, then we will share with you recipes on how and what to clean the pan from soot and restore it for safe use.

to contents ↑

Where to begin?

Before starting any cleaning procedure, you need to find out what material your pan is made of. Whatever it is, you can buy a special detergent for it in stores. A melamine sponge is also very useful.

If you do not want to spend money financially, you can use the improvised means that can be found in almost every home, and methods already verified by the older generation.

to contents ↑

How to clean a cast-iron pan from soot?

If your pan is cast iron, then the problem of carbon deposits is especially relevant for you. These pans are most prone to poorly laundered soot. But they are also convenient in that they are not afraid of almost no experiments in terms of cleaning. Therefore, in order to clean a cast-iron pan from a deposit, various means will suit you.

Materials at hand

To remove carbon deposits on the inner surface of the pan help salt, vinegar and soda. Fill a few tablespoons of salt with vinegar in a pan so that the latter completely covers the bottom of the bowl. Bring the mixture to a boil, then add a couple of tablespoons of soda, set the minimum heat on the stove and wait until all the liquid has evaporated. Now just rinse with water.

Important! A small deposit can remove ordinary table salt. Fry the wet salt in a pan, then rinse with water.

Laundry soap

Laundry soap is not only able to remove stains from your clothes. It will also help with cleaning cast iron dishes. Rub into a large pot or basin on a coarse grater laundry soap and fill it with water. Place the pan to be cleaned there. Let it boil for 2 hours and you will be able to appreciate the amazing result.

"Dangerous mix

Another option for cleaning dishes from carbon deposits is to use silicate glue and soda ash. Place the pan in hot water with the addition of the contents of one tube of silicate glue (you can replace it with PVA glue) and a small amount of soda ash. You can also add half a bar of laundry soap. Heat on low heat for about 2 hours a mixture of all these ingredients with water. After that, wash the pan with clean water.

Important! This method is quite dangerous for the health of the hostess, so use glasses, a mask and gloves, and ensure good ventilation of the room.

Acid

Stir vinegar in water at a ratio of 1: 3. Put a frying pan with such a solution on a slow fire for 3-4 hours. Do not forget to monitor the fluid level. Provide good ventilation, as the smell will be intense.

Sorbents

Activated carbon not only has a beneficial effect on our body, it also “cures” carbon deposits and cast-iron dishes. Grind a pack of activated carbon and sprinkle on a wet skillet. After an hour, clean it with any dishwasher.

Environmentally friendly way

If you have the opportunity to carry out cleaning procedures in the fresh air, then the sand cleaning method is suitable for you. Pour sand into a skillet and set on low heat for about 3 hours. After that, tap on the outside of the pan and see how soot easily falls off the surface.

Important! It is advisable to use this method only on the street, since the smell emitted during the process will not be entirely pleasant. And I certainly don’t really want to carry sand to a clean house.

Alternative way for the brave

A blowtorch may also be useful for clean dishes. This method requires compliance with all fire safety regulations. Bring the outside of the pan under the torch. Nagar will disappear from the surface just before our eyes. This method is quite effective, but requires special care.

Important! So that the food does not burn during frying, after cleaning the pan, bake the salt in it until it turns brown. After that, heat vegetable oil in a skillet.

Cleaning without cleaning agents

Open fire will help to remove not only soot inside the pan, but also to clean the pan from soot outside. Just bake the pan over the fire, then wash in plain water. You can do this at home on the stove, but then be prepared for the fact that it will be impossible to be in the room for some time. During the procedure itself and a couple of hours after it, it is better to keep the window in the kitchen fully open, leave the hood working, and put all the important and valuable objects and dishes in the drawers.

to contents ↑

How to remove rust from cast iron?

To remove rust from cast iron, scrapers made of steel or copper wire will help. To help you can make an abrasive paste of soda or salt mixed with a small amount of water.

Use a cheap toilet cleaner to clean old rust on the surface. It contains about 20% hydrochloric acid, which dissolves rust and turns it into easily removable powder.

Important! All parts having a brilliant coating will lose their beautiful appearance upon contact with hydrochloric acid. Keep this in mind when using a toilet cleaner.

to contents ↑

How to clean the pan from carbon deposits, if it is made of aluminum?

If you have an aluminum frying pan, be careful with it. This metal is very soft and ductile. It is sensitive to mechanical stress, hard metal scrapers and abrasive cleaners.

Given all these features, the best ways to clean the pan from soot are the following methods:

• Bring to a boil in a pan water with two tablespoons of citric acid. Leave on low heat for another 15-20 minutes. Drain and rinse the pan with clean water.
• You can use baking soda. Having put it on a dirty surface of ware, rub it with a soft washcloth.
• Make such a solution: 10 g of sodium tetraborate (pharmacy borax), a glass of warm water, a couple of drops of ammonia. Use a sponge to clean the dirty surface. After - rinse well with water.

to contents ↑

How to clean the pan from carbon deposits, if it has a non-stick coating?

Mistresses increasingly prefer non-stick coating in choosing a frying pan. And this is understandable, because such a coating protects the inside of the dishes from unwanted and harmful soot. But what is it to clean such a pan from soot from the outside?

Pans with non-stick properties must also be cleaned very carefully and carefully.To wash the pan from carbon deposits outside, you can use the above methods with soda, laundry soap, salt with vinegar and soda, soda ash and silicate glue.

Important! If carbon deposits began to form on the inner surface of the pan with a non-stick coating, then using such dishes is dangerous. This indicates a violation of the surface coating. It’s time to change this pan to a new one.

to contents ↑

Stock footage

To avoid problems with carbon deposits in the pan, wash immediately after each use. Do not leave this work for tomorrow, as the dirt is even more eaten into the surface and it will be more difficult for you to bring the dishes in a clean form.