How to clean the seams between the tiles on the floor?

Laying tiles ends with grouting, which makes the appearance of the surface attractive. However, unfortunately, after a while between the joints of the tile, dirt begins to accumulate, and moisture entering the joints contributes to the growth of mold. Contaminated seams are a natural process that cannot be avoided. In order to eliminate these difficulties, it is necessary to periodically clean the joints of the tiles. On how to clean the seams between the tiles on the floor, we will consider further in the article.

to contents ↑

Types of pollution

The floor is often dirty with dust, dirt, splashes of water with various substances, however, tiles can be wiped instantly, which is much more difficult with joints. In order to wash them, you need to find time and energy.

More often seams are subject to such pollution:

• residues of used materials after repair work;
• detergents;
• mud;
• food particles;
• dust.

to contents ↑

Means for cleaning the joints between tiles

In order to clean the darkened grout between the tiles, you can purchase products that are sold in shopping centers. They are selected, depending on the level of seam contamination:

• If the grout has lost its color, or the cause of the problem is a splash of fat during cooking, to clean the joints, it is necessary to use preparations with surface-intensive substances that destroy the texture of the oily layer.
• Colonies of mold bacteria penetrate deep into the coating layers and become resistant to simple cleaning agents. In this case, chlorine-containing preparations should be used. If you want to act for sure, usespecial anti-fungal agents.

Important! After treating the fungus and mold, it is possible to remove the remaining dirt using fine-grained emery paper. It removes the thin top layer, and after the procedure the grout will be more even and smooth.

• In rooms with high traffic, where particles of dirt and sand are often brought from the street, simple detergents, along with physical effort, do an excellent job. In a separate article we told you about best floor cleaners.
• In small areas where it is impossible to wash the dirt, you can use a special felt-tip pen.
• Modern electric steam generator it will help both to clean the joints between the tiles on the floor, and to disinfect the surface, and also remove moldiness and fungus. With this approach, the structure of the tile is not broken in any way, streaks and stains will not appear. Dirty areas are treated with dense hot steam, after which the dirt is removed with a damp cloth.

Important! Chemicals that come into contact with skin and if inhaled can cause serious burns. Take care of your own protection by protecting exposed parts of the body with clothing, wearing a mask to protect your respiratory system. And don't forget the gloves. It will not become redundant if you open the window or turn on the ventilation.

to contents ↑

Cleaning tile joints with folk remedies

The tools at hand do well if they are applied on time. By correctly applying chemical interactions, the ability to push dirt particles to the surface, after which they will simply be removed.The easiest way is to clean the tile joints on the floor, because in a horizontal position it is easier to apply solutions and give them time to act. On the wall it will be more difficult to deal with pollution, but it is possible.

Baking Soda Cleansing

In order for the alkaline environment to work productively, conditions should be created for deep penetration.

You will need:

• baking soda;
• brush (you can use a regular toothbrush);
• water.

Processing Order:

1. Soak the brush in water, dip it in soda and treat the stain. Try to keep as much powder on the surface as possible.
2. If it is necessary to clean the joints in the tiles on the floor, sprinkle with powder the joints and moisten with water.
3. Leave the mixture for 10 minutes and then brush again.
4. Spray a solution of citric acid with water on soda (2 tbsp. L per 100 ml).
5. A chemical reaction occurs. When the sizzling reaction is over, spray the solution onto the surface again.
6. Finally, remove a lot of dirt with plenty of water.

Hydrogen peroxide

It copes with various pollution, and even deeply ingrained.

You will need a solution of 30% hydrogen peroxide and gloves.

Important! If a large amount of the product gets on your skin, you can get a chemical burn, so do not ignore the need to use gloves - this will protect your hands.

Cleaning the seams of tiles does not take much effort - you just need to pour the solution on the dirt, wait 10 minutes for the reaction to interact, and wipe it with a damp cloth or sponge.

Bleach soda

This method copes with even mold. To do this, you must:

1. 5 tbsp. l Pour soda into a small container.
2. Add bleach gradually, stirring until a pasty mixture is obtained.
3. Cover the seams with a thick layer of gruel, allow to dry completely.
4. Then brush off the mass.
5. Wipe the surface with a damp sponge.

Important! This method is suitable for snow-white grout, but colored pigments can discolor.

to contents ↑

Stock footage

In this article, we have offered you several effective ways by which you can quickly clean the seams between the tiles on the floor. Do this homework more often, and then it will be less time-consuming.