How to remove the smell of gasoline from clothes 🥝 How long does it disappear than remove from pants and jackets

At the cottage or in the garage, you always need a container for storing water. If you have a barrel in your household that previously used to store fuels and lubricants, or if you accidentally purchased a plastic barrel that was used for chemicals, then after quality cleaning and washing such a container can even be used for a summer shower. So do not rush to part with the containers, and our tips and tricks on how to clean the barrel of machine oil and how to wash the plastic barrel of chemistry will definitely come in handy.

to contents ↑

Fuel and lubricants packaging

How to clean and wash the canister and evaporate the barrel? Combustive-lubricating materials are synonymous with the word “petroleum products”. Such materials include products and lubricants that are most often used in the automotive industry. For example, combustible materials, in other words - fuel, is divided into:

• Petrol.
• Diesel or diesel.

Lubricants are also divided into the following products:

• Motor oil.
• Transmission oil.
• Grease
• Special purpose oil.

Based on exactly what your tank is contaminated with, the ways to clean the barrel of engine oil will differ slightly.

to contents ↑

Methods for Removing Oil Residues

Typically, containers containing petroleum products are cleaned using the following methods:

• Steaming.
• Flushing.

Such methods are quite dangerous and require special care. Proceed as follows:

1. From the brick, install the support walls. There should be two of them.
2. Place a metal barrel on the supports.
3. Pour enough water into the tank.
4. Make a fire under the barrel.
5. The container stopper is not necessary.
6. Water should boil for a long time so that enough steam accumulates in the barrel.
7. Residues of petroleum products, thanks to steam, will drain into the water.
8. After the water boils and begins to cool, cover the barrel with a cork, but do not twist it.
9. Leave the tank to cool.
10. Pour dirty water out of the barrel.
11. Repeat the whole process one more time if the result does not satisfy you.

Aids

To make the cleaning process more effective, use the following drugs and substances:

• Caustic soda. This product can be added to water during steaming and washing to quickly wash the plastic barrel from chemistry.
• UPTS-2002. The product effectively degreases and removes oil residues at a temperature of 30 to 50 degrees in the barrel. The product can also be used as a solvent for oil, lubricants, and other similar materials.
• SOFEX-TMS-2001. This product is a general purpose detergent product. It can also be used to clean the tank of oil product residues under the brand name B. This detergent has several brands for various purposes and materials.

to contents ↑

How to clean a barrel of engine oil with improvised means?

To remove residual diesel fuel or engine oil, gasoline is most often used.

Important! The smell of gasoline is well removed with plenty of water.

We offer to use in the fight against the problem of how to clean the barrel of engine oil, and other improvised devices:

1. Dishwashing liquid. This is the easiest and most effective way. Pour hot water into the barrel, and then add detergent. Let the tank stand for a while, and then drain the dirty water. Household chemicals can easily cope with any fat. If the result does not satisfy you, repeat the washing procedure. Rinse off any remaining product with plenty of water.
2. Sand and sawdust. These substances will also help clean the barrel of engine oil. Pour sawdust or sand into the tank so that they absorb oil. After - throw away dirty materials and clean the tank with water by adding dishwashing detergent. As a washing device, laundry soap or laundry detergent can also be used.

Important! To clean the container of residual oil, you can use newspapers or other paper that can absorb liquid well, instead of sand or sawdust.

3. The sun. This method will take time, since in direct sunlight the barrel should stand for a month. During this time, engine oil will oxidize. To not only clean the barrel of engine oil, but also to remove the smell from it, rinse the tank with water and detergent.
4. Paint. A more radical way to get rid of oil residues is to paint the inside of the barrel. Before painting, wipe the container with newspapers, any material or sawdust to absorb excess oil. You can use ordinary enamel for painting. It is possible to use during the work as a brush for paint, and a spray gun.
5. Solvent. In any hardware store, purchase a solvent, white spirit or kerosene. First turn the barrel over so that the remaining oil drains, and then walk along the surface of the container with any solvent.
6. Acoustic soda, which corrodes any, both organic and inorganic compounds, can also help in cleaning. But it is necessary to act with extreme caution so that the high concentration of the solution does not corrode the plastic.

Important! When using solvents and other household chemicals, protect yourself with protective equipment. Wear rubber gloves before work and protect your eyes with glasses.

7. Use active foam, which is found in car washes, if possible.

Important! For metal barrels, we suggest using an effective method - firing from the inside. However, this procedure should be carried out in dry, calm weather and very carefully, since the oil is easily flammable. Proceed as follows:

• In the barrel, cut off the top cover.
• Fold dry branches, firewood inside the tank.
• Set fire to the branches. Fire will remove all traces of oil.
• Cover the barrel with a metal sheet so that the fire does not spread further.
• Wait for the barrel to cool.
• Scrub the surface with a stiff brush to remove any residual dirt. As a result, you get a clean container, but without additional coating, over time, the barrel will become rusted.
• Mix one kilogram of cement with 0.5 l of milk.
• Cover the inside of the tank with the resulting mixture.
• Leave the barrel to dry for a couple of days.
• If desired, on top of the mixture, paint the surface from the inside with water-dispersion paint, although in this form, the tank can be used on the farm.

to contents ↑

How to wash a plastic barrel from chemistry?

After quality cleaning and washing, a plastic container can be used, for example, for a summer shower or for storing water for irrigation, but for drinking water, such containers are unsuitable.

To wash a plastic barrel from chemistry and make it applicable for the storage of clean drinking water, you can use:

1. Dishwashing liquid. Fill the barrel with hot water and add detergent. For high-quality washing, repeat the procedure several times. After - remove the washing product with running water in large quantities.
2. Caustic soda.This product removes all compounds - both organic and inorganic. Fill the container with hot water and add the product. After washing, rinse the container in running water.
3. Laundry soap or laundry detergent. These cleaning products will also help you get rid of chemical residues.

to contents ↑

Stock footage

Use our recommendations and tips and used barrels will be useful to you again on the farm. And as a bonus, you can direct those unspent funds that you could use to purchase new water tanks to personally useful and pleasant things for yourself. Good luck