How to fix plastic panels to the wall in the bathroom?

When planning repairs in their apartment, any person wants to get the best result, but at the same time meet the deadlines and do without additional financial costs. The issue of cleaning after repair work is even more worrying, because no one wants to spend a lot of time on it and cause discomfort to neighbors. In this case, the ideal solution would be to install plastic panels. In this article we will look at how to fix plastic panels to the wall in the bathroom, delivering a minimum of inconvenience to people living in the neighborhood. If you carefully follow the instructions, then everything will turn out perfectly and you will not have to resort to the help of specialists.

to contents ↑

Pros and Cons of Plastic Panels

Wall decoration in the bathroom with plastic panels has many advantages, the main of which are flexibility and resistance to moisture. Attention should be paid to the variety of plastic applications and how to fix PVC panels to the wall in the bathroom with “liquid nails”, because this is the most popular installation method.

Important! Thanks to constantly evolving technologies, it became possible to transfer a variety of patterns to plastic, and due to this, customers are offered the widest range of this material.

The indisputable advantages of PVC panels are harmlessness and safety, so they are often used as a facing material in medical institutions. Of course, as in any area of ​​production, there are unscrupulous suppliers that manufacture low-quality panels.

Regarding the disadvantages:

• The most important of them is the release of toxic and life-threatening fumes in a fire. Such phenomena are rare, because the skin itself cannot catch fire.

Important! In order for the plastic to ignite, it must be heated to a temperature of over 300 degrees.

• In terms of strength, they are also not considered the best among other cladding materials. The plastic is fragile and does not withstand severe impacts. You can even leave a hole or a dent in it by hitting it with your fist.

But these disadvantages are fully offset by the affordable cost and ease of installation.

to contents ↑

Why is it better to attach plastic to liquid nails?

A classic version of wall decoration with plastic panels is the installation of a wooden crate, on top of which plastic is installed. This technology needs careful preparation and greatly reduces the number of usable square meters. This factor must be taken into account in cases of repair in small bathrooms.

Due to the use of “liquid nails” in this process, all these problems can be avoided. With their help, wall cladding with plastic can be done in just a few hours, while every centimeter of usable area is saved.

“Liquid nails” used to install plastic panels have the following advantages:

• Construction glue does not corrode and does not damage plastic.
• The nails dry quickly enough, but at the same time, the necessary margin of time remains to adjust the location of the plastic on the wall.
• No mechanical action is required during bonding.
• Acrylic glue is completely safe for health and resistant to temperature changes and moisture.

In addition to numerous advantages, “liquid nails” have certain disadvantages. For example:

• Neopropylene compounds are too chemically aggressive, which is why you should always use protective gloves and a respirator when working with them.
• After installing the panels, it is necessary to properly ventilate the room so that the unpleasant odor completely disappears.

In principle, these disadvantages can be easily overcome, because as soon as the glue dries, it will become completely safe for health.

to contents ↑

The main stages of the installation of plastic panels on liquid nails

There are two main stages of fastening PVC panels:

1. Surface preparation for work.
2. The installation process itself.

Preparing walls for plastic cladding

Before gluing PVC panels to “liquid nails” in the bathroom, you need to properly prepare the walls, since they must be clean, even and dry.

It is necessary:

• To remove traces of an old covering from walls and with the help of putty to level holes and deep cracks.
• Then treat the surface with a primer so that it fastens the wall and provides protection against mold, mildew and moisture.

As soon as the primer dries, you can start decorating.

You need to prepare in advance all the necessary tools, namely:

• Selected PVC panels.
• Scissors for plastic.
• Sealant.
• Screwdriver or screwdriver.
• Building level, tape measure, marker or pencil.
• Stapler and hammer.
• Stepladder.

Important! Using a tape measure, you need to measure the working surface in order to correctly calculate the amount of the desired material. Before installing plastic panels, it is recommended that they be kept at room temperature for at least half an hour. And do not rush to remove the protective film from them until the installation is completed, as it will help maintain their appearance in good condition.

Features of mounting PVC panels on liquid nails

Do not forget that the installation of PVC panels on the wall on “liquid nails” can be done only on condition of a perfectly flat surface. The installation process is as follows:

• Carefully check whether the walls are completely clean from old wallpaper, plaster and tile, as well as how well the primer has dried.
• As soon as the stoves adapt to the humidity level in your bathroom, you can begin to work.
• Prepare the “liquid nails”. To do this, cut off the tip from the spray can, put the cap on top, open it and securely fasten it in the construction gun.
• Draw dots, zigzag patterns or bars on the walls.
• When gluing the panels to the wall, carefully press them so that the nails grasp better and evenly distribute under each element.

Important! You can use a rubber roller for this. You can adjust the position of the panels, but you only have twenty minutes to do this.

• The final stage is sealing the joints between the plastic parts and other elements present in the bathroom with a special tool. On this, the installation of the wall profile can be considered completed.

to contents ↑

Stock footage

In this article, we told you about the easiest way to attach plastic panels in the bathroom to “liquid nails”. We hope you managed to quickly and efficiently complete this work, and now the new design gives you exactly the feeling of comfort and coziness that you were counting on.